76 Aluminium and articles thereof

7601 Aluminium; unwrought

7601.10 Aluminium; unwrought, (not alloyed)

• 7601.10.10.00 Slabs3%
• 7601.10.90.00 Other3%

7601.20 Aluminium; unwrought, alloys

• 7601.20.30.00 Slabs6%
• 7601.20.40.00 Billets6%
• 7601.20.80.00 Other6%

7602 Aluminium; waste and scrap

7602.00 Aluminium; waste and scrap

• Waste
• 7602.00.11.00 Turnings, shavings, chips, milling waste, sawdust and filings; waste of coloured, coated or bonded sheets and foil, of a thickness (excluding any backing) not exceeding 0,2 mmFree
• 7602.00.19.00 Other (including factory rejects)Free
• 7602.00.90.00 ScrapFree

7603 Aluminium; powders and flakes

7603.10 Aluminium; powders of non-lamellar structure

• 7603.10.00.00 Powders of non-lamellar structure5%

7603.20 Aluminium; powders of lamellar structure, flakes

• 7603.20.00.00 Powders of lamellar structure; flakes5%

7604 Aluminium; bars, rods and profiles

7604.10 Aluminium; (not alloyed), bars, rods and profiles

• Bars and rods
• 7604.10.10.11 Unassembled, containing not more than 99.3% of aluminium7.5%
• 7604.10.10.90 Other7.5%
• Profiles
• Bearing a specific manufacture number, for use in certain types of aircraft
• 7604.10.90.11 Unassembled, containing not more than 99.3% of aluminium7.5%
• 7604.10.90.19 Other7.5%
• Conical shapes for reinforcing lateral rudders, for use in certain types of aircraft
• 7604.10.90.25 Unassembled, containing not more than 99.3% of aluminium7.5%
• 7604.10.90.29 Other7.5%
• Other
• 7604.10.90.80 Unassembled, containing not more than 99.3% of aluminium7.5%
• 7604.10.90.89 Other7.5%

7604.21 Aluminium; alloys, hollow profiles

• 7604.21.00.00 Hollow profiles7.5%

7604.29 Aluminium; alloys, bars, rods and profiles, other than hollow

• 7604.29.10.00 Bars and rods7.5%
• Profiles
• 7604.29.90.10 Bearing a specific manufacture number, for use in certain types of aircraft7.5%
• 7604.29.90.20 Conical shapes for reinforcing lateral rudders, for use in certain types of aircraft7.5%
• 7604.29.90.90 Other7.5%

7605 Aluminium wire

7605.11 Aluminium; (not alloyed), wire, maximum cross-sectional dimension exceeds 7mm

• 7605.11.00.00 Of which the maximum cross-sectional dimension exceeds 7 mm7.5%

7605.19 Aluminium; (not alloyed), wire, maximum cross-sectional dimension is 7mm or less

• 7605.19.00.10 Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm7.5%
• 7605.19.00.90 Other7.5%

7605.21 Aluminium; alloys, wire, maximum cross-sectional dimension exceeding 7mm

• 7605.21.00.10 Aluminium alloy wire with a diameter of 9,50 mm or more but not more than 19,15 mm, in coils, for use in the manufacture of aeronautical fasteners7.5%
• 7605.21.00.90 Other7.5%

7605.29 Aluminium; alloys, wire, maximum cross-sectional dimension is 7mm or less

• 7605.29.00.00 Other7.5%

7606 Aluminium; plates, sheets and strip, thickness exceeding 0.2mm

7606.11 Aluminium; plates, sheets and strip, thickness exceeding 0.2mm, (not alloyed), rectangular (including square)

• 7606.11.30.00 Aluminium Composite Panel7.5%
• Other
• Painted, varnished or coated with plastics
• Plates bearing a specific manufacture number, for use in certain types of aircraft
• 7606.11.50.25 Not backed, without internal layers of other material7.5%
• 7606.11.50.30 Other7.5%
• Other
• 7606.11.50.86 Not backed, without internal layers of other material7.5%
• 7606.11.50.89 Other7.5%
• Other, of a thickness of
• Less than 3 mm
• Plates bearing a specific manufacture number, for use in certain types of aircraft
• 7606.11.91.25 Not backed, without internal layers of other material7.5%
• 7606.11.91.30 Other7.5%
• Other
• 7606.11.91.86 Not backed, without internal layers of other material7.5%
• 7606.11.91.89 Other7.5%
• Not less than 3 mm but less than 6 mm
• Plates bearing a specific manufacture number, for use in certain types of aircraft
• 7606.11.93.25 Not backed, without internal layers of other material7.5%
• 7606.11.93.30 Other7.5%
• Other
• 7606.11.93.86 Not backed, without internal layers of other material7.5%
• 7606.11.93.89 Other7.5%
• Not less than 6 mm
• Plates bearing a specific manufacture number, for use in certain types of aircraft
• 7606.11.99.25 Not backed, without internal layers of other material7.5%
• 7606.11.99.30 Other7.5%
• Other
• 7606.11.99.86 Not backed, without internal layers of other material7.5%
• 7606.11.99.89 Other7.5%

7606.12 Aluminium; plates, sheets and strip, thickness exceeding 0.2mm, alloys, rectangular (including square)

• Beverage can body stock, end stock and tab stock
• 7606.12.11.00 Beverage can body stock7.5%
• 7606.12.19.00 Beverage can end stock and tab stock7.5%
• 7606.12.30.00 Aluminium Composite Panel7.5%
• Other
• Painted, varnished or coated with plastics
• Plates bearing a specific manufacture number, for use in certain types of aircraft
• Not backed, without internal layers of other material
• 7606.12.50.23 Of a thickness of not less than 0,8 mm7.5%
• 7606.12.50.25 Other7.5%
• 7606.12.50.30 Other7.5%
• Other
• Not backed, without internal layers of other material
• 7606.12.50.85 For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm7.5%
• Other
• 7606.12.50.87 Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels7.5%
• 7606.12.50.88 Other7.5%
• 7606.12.50.89 Other7.5%
• Other, of a thickness of
• Less than 3 mm
• Plates bearing a specific manufacture number, for use in certain types of aircraft
• Not backed, without internal layers of other material
• 7606.12.92.23 Of a thickness of not less than 0,8 mm7.5%
• 7606.12.92.25 In coils or in coiled strips in cut-to-length sheets, or in the form of circles7.5%
• 7606.12.92.27 Other7.5%
• 7606.12.92.30 Other7.5%
• Other
• Not backed, without internal layers of other material
• 7606.12.92.91 For use as body panels in the car industry or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm7.5%
• Other
• 7606.12.92.92 Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels7.5%
• 7606.12.92.93 In coils or in coiled strips in cut-to-length sheets, or in the form of circles; of a thickness of 0,2 mm or more7.5%
• 7606.12.92.94 Other7.5%
• 7606.12.92.97 Other7.5%
• Not less than 3 mm but less than 6 mm
• 7606.12.93.10 Plates bearing a specific manufacture number, for use in certain types of aircraft7.5%
• Other
• Not backed, without internal layers of other material
• 7606.12.93.85 For use as body panels in the car industry or for use in the manufacture of aircraft parts7.5%
• 7606.12.93.86 In coils or in coiled strips, in cut-to-length sheets, or in the form of circles7.5%
• 7606.12.93.87 Other7.5%
• 7606.12.93.88 Other7.5%
• Not less than 6 mm
• 7606.12.99.10 Plates bearing a specific manufacture number, for use in certain types of aircraft7.5%
• Sheets of aluminium-lithium alloys
• Not backed, without internal layers of other material
• 7606.12.99.21 For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts7.5%
• 7606.12.99.25 In plates, of a thickness of more than 6 mm7.5%
• 7606.12.99.29 Other7.5%
• 7606.12.99.30 Other7.5%
• Other
• Not backed, without internal layers of other material
• 7606.12.99.85 For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts7.5%
• 7606.12.99.86 In plates, of a thickness of more than 6 mm7.5%
• 7606.12.99.87 Other7.5%
• 7606.12.99.88 Other7.5%

7606.91 Aluminium; plates, sheets and strip, thickness exceeding 0.2mm, not alloyed, (not rectangular or square)

• Plates bearing a specific manufacture number, for use in certain types of aircraft
• 7606.91.00.25 Not backed, without internal layers of other material: in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; in plates, of a thickness exceeding 6 mm7.5%
• 7606.91.00.30 Other7.5%
• Other
• 7606.91.00.86 Not backed, without internal layers of other material: in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; in plates, of a thickness exceeding 6 mm7.5%
• 7606.91.00.88 Other7.5%

7606.92 Aluminium; plates, sheets and strip, thickness exceeding 0.2mm, alloys, (not rectangular or square)

• Plates bearing a specific manufacture number, for use in certain types of aircraft
• Not backed, without internal layers of other material: in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; in plates, of a thickness exceeding 6 mm
• 7606.92.00.23 Of a thickness of not less than 0,8 mm, for use in the manufacture of aircraft parts7.5%
• 7606.92.00.25 Other7.5%
• 7606.92.00.30 Other7.5%
• Other
• Not backed, without internal layers of other material: in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; in plates, of a thickness exceeding 6 mm
• 7606.92.00.85 For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm7.5%
• Other
• 7606.92.00.91 Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels7.5%
• 7606.92.00.92 Other7.5%
• 7606.92.00.95 Other7.5%

7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2mm

7607.11 Aluminium; foil, (not backed), rolled (but not further worked), of a thickness not exceeding 0.2mm

• Of a thickness of less than 0,021 mm
• In rolls of a weight not exceeding 10 kg
• Of a thickness of 0,007 mm or more but less than 0,021 mm
• 7607.11.11.11 Consigned from Thailand7.5%
• 7607.11.11.19 Other7.5%
• 7607.11.11.90 Other7.5%
• Other
• 7607.11.19.10 For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width not exceeding 650 mm7.5%
• 7607.11.19.30 For household use, of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed7.5%
• 7607.11.19.40 For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed7.5%
• 7607.11.19.50 For household use, of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed7.5%
• 7607.11.19.60 For other uses than household aluminium foil: Of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed, or; Of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed, or; Of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed7.5%
• Other
• 7607.11.19.91 Aluminium converter foil7.5%
• 7607.11.19.94 Household aluminium foil7.5%
• 7607.11.19.96 Other7.5%
• Of a thickness of not less than 0,021 mm but not more than 0,2 mm
• Aluminium foil in rolls: having a purity of 99,99 % by weight; of a thickness of 0,021 mm or more but not more than 0,2 mm; with a width of 500 mm; with a surface oxide layer by 3 to 4 nm thick; and with a cubic texture of more than 95 %
• Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers
• 7607.11.90.44 Of a thickness of not less than 0,03 mm, without internal layers of other material7.5%
• 7607.11.90.46 Other7.5%
• Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil
• 7607.11.90.48 Of a thickness of not less than 0,03 mm, without internal layers of other material7.5%
• 7607.11.90.49 Other7.5%
• Other
• 7607.11.90.51 Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips7.5%
• Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles
• Without internal layers of other material
• 7607.11.90.52 Alloyed, for use as body panels in the car industry7.5%
• 7607.11.90.53 Other7.5%
• 7607.11.90.54 Other7.5%
• 7607.11.90.56 Other7.5%
• Plain aluminium foil with the following parameters: an aluminium content of 99,98 % or more; a thickness of 0,070 mm or more but not more than 0,125 mm; with a cubic texture of a kind used for high voltage etching
• 7607.11.90.65 Without internal layers of other material, in coils or in coiled strips7.5%
• 7607.11.90.67 Other7.5%
• Other
• Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers
• 7607.11.90.71 Of a thickness of not less than 0,03 mm, without internal layers of other material7.5%
• 7607.11.90.72 Other7.5%
• Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil
• 7607.11.90.73 Of a thickness of not less than 0,03 mm, without internal layers of other material7.5%
• 7607.11.90.74 Other7.5%
• Aluminium and magnesium alloy strip or foil: of an alloy conforming to standards 5182-H19 or 5052-H19; in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm; of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm; of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm; having a camber tolerance of not more than 0,4 mm/750 mm; of a flatness measurement: I-unit ±4; having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa; of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %; for use in the manufacture of slats for blinds
• 7607.11.90.75 Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips7.5%
• Of a thickness of 0.2 mm
• Without internal layers of other material
• 7607.11.90.76 For use as body panels in the car industry7.5%
• 7607.11.90.77 Other7.5%
• 7607.11.90.78 Other7.5%
• 7607.11.90.79 Other7.5%
• Other
• 7607.11.90.91 Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips7.5%
• Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles
• Without internal layers of other material
• 7607.11.90.92 Alloyed, for use as body panels in the car industry7.5%
• 7607.11.90.93 Other7.5%
• 7607.11.90.94 Other7.5%
• 7607.11.90.96 Other7.5%

7607.19 Aluminium; foil, (not backed), of a thickness not exceeding 0.2mm, not rolled

• Of a thickness of less than 0,021 mm
• Of a thickness of 0,007 mm or more but less than 0,021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed
• 7607.19.10.11 Consigned from Thailand7.5%
• 7607.19.10.19 Other7.5%
• 7607.19.10.90 Other7.5%
• Of a thickness of not less than 0,021 mm but not more than 0,2 mm
• 7607.19.90.75 Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips7.5%
• Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles
• Without internal layers of other material
• 7607.19.90.84 Alloyed, for use as body panels in the car industry7.5%
• Other
• 7607.19.90.93 Hot rolled coils, alloyed, tension levelled, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels7.5%
• 7607.19.90.94 Other7.5%
• 7607.19.90.95 Other7.5%
• 7607.19.90.96 Other7.5%

7607.20 Aluminium; foil, backed with paper, paperboard, plastics or similar backing materials, of a thickness (excluding any backing) not exceeding 0.2mm

• 7607.20.10.00 Of a thickness (excluding any backing) of less than 0,021 mm10%
• Of a thickness (excluding any backing) of not less than 0,021 mm but not more than 0,2 mm
• 7607.20.91.00 Aluminium Composite Panel7.5%
• 7607.20.99.00 Other7.5%

7608 Aluminium; tubes and pipes

7608.10 Aluminium; tubes and pipes, not alloyed

• With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
• 7608.10.00.11 Unassembled, not welded, containing not more than 99.3% of aluminium—
• 7608.10.00.19 Other—
• 7608.10.00.20 Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft7.5%
• Other
• 7608.10.00.80 Unassembled, not welded, containing not more than 99.3% of aluminium7.5%
• 7608.10.00.89 Other7.5%

7608.20 Aluminium; tubes and pipes, alloys

• Welded
• 7608.20.20.10 With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft—
• 7608.20.20.20 Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft7.5%
• 7608.20.20.90 Other7.5%
• Other
• Not further worked than extruded
• 7608.20.81.10 With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft—
• 7608.20.81.90 Other7.5%
• Other
• 7608.20.89.10 With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft—
• 7608.20.89.20 Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft7.5%
• 7608.20.89.90 Other7.5%

7609 Aluminium; tube or pipe fittings (e.g. couplings, elbows, sleeves)

7609.00 Aluminium; tube or pipe fittings (e.g. couplings, elbows, sleeves)

• 7609.00.00.10 For use in certain types of aircraft5.9%
• 7609.00.00.30 Aluminium connecting block for automotive air conditioning systems: with a T6 hardening; equipped with round stubs with a circumferential outer groove; with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm; with a distance between holes of 15 mm or more but not more than 22 mm; with sockets designed for brazing or clamping; with mounting holes for M6 or M8 mounting screw, threaded or not; with a width of 5 mm or more but not more than 16 mm; for connecting a compressor, a condenser, an evaporator, a chiller and other lines5.9%
• 7609.00.00.40 Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers: with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm; with a weight of 0,02 kg or more, but not more than 0,25 kg; for use in the manufacture of cooling system in vehicles of Chapter 875.9%
• 7609.00.00.50 Machined aluminium components: containing by weight 0,55 %, or more but not more than 0,61 % of magnesium; containing by weight 0,55 %, or more but not more than 0,61 % of silicon; with a hardening state of T5 or T6; with a mass of 0,05 kg or more, but not more than 0,2 kg; for use in the manufacture of CO₂ cooling systems in motor vehicles5.9%
• 7609.00.00.60 Aluminium connection block: with a weight of 3 g or more but not more than 400 g; manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade; being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly; with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line); with sockets designed for brazing or fastening; with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm; for the manufacture of automotive cooling and air conditioning systems5.9%
• 7609.00.00.90 Other5.9%

7610 Aluminium; structures (excluding prefabricated buildings of heading no. 9406) and parts (e.g. bridges and sections, towers, lattice masts, etc) plates, rods, profiles and tubes for structures

7610.10 Aluminium; structures (excluding prefabricated buildings of heading no. 9406) and parts of structures, doors, windows and their frames and thresholds for doors

• 7610.10.00.00 Doors, windows and their frames and thresholds for doors6%

7610.90 Aluminium; structures (excluding prefabricated buildings of heading no. 9406) and parts of structures, n.e.c. in heading no. 7610, plates, rods, profiles, tubes and the like

• 7610.90.10.00 Bridges and bridge-sections, towers and lattice masts7%
• Other
• 7610.90.90.10 Bars, rods, profiles (whether or not hollow), tubes, pipes, unassembled, not welded, made from aluminium, whether or not alloyed, containing not more than 99.3% of aluminium6%
• Other
• 7610.90.90.91 Products attached (e.g. by welding or fasteners) to form subassemblies6%
• 7610.90.90.92 Products in a packaged kit with the necessary parts to assemble a finished product without further finishing or fabrication of the parts (‘finished goods kit’)6%
• 7610.90.90.95 Other6%

7611 Aluminium; reservoirs, tanks, vats and the like for material (not compressed or liquefied gas) of capacity over 300l, whether or not lined, heat-insulated, not fitted with mechanical, thermal equipment

7611.00 Aluminium; reservoirs, tanks, vats and similar containers, for material (not compressed or liquefied gas), of a capacity over 300l, whether or not lined, not fitted with mechanical/thermal equipment

• 7611.00.00.00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment6%

7612 Aluminium casks, drums, cans, boxes etc (including rigid, collapsible tubular containers), for materials other than compressed, liquefied gas, 300l capacity or less, lined, heat-insulated or not

7612.10 Aluminium; collapsible tubular containers, for any material, (not compressed or liquefied gas), 300l capacity or less, whether or not lined, not fitted with mechanical/thermal equipment

• 7612.10.00.00 Collapsible tubular containers6%

7612.90 Aluminium; casks, drums, cans, boxes and the like for any material (not compressed or liquefied gas), 300l capacity or less, whether or not lined or heat-insulated, no mechanical or thermal equipment

• 7612.90.20.00 Containers of a kind used for aerosols6%
• 7612.90.30.00 Manufactured from foil of a thickness not exceeding 0,2 mm6%
• 7612.90.80.00 Other6%

7613 Aluminium; containers for compressed or liquefied gas

7613.00 Aluminium; containers for compressed or liquefied gas

• 7613.00.00.10 Bottles for inflating escape chutes, intended for use in certain types of aircraft6%
• 7613.00.00.90 Other6%

7614 Aluminium; stranded wire, cables, plaited bands and the like, (not electrically insulated)

7614.10 Aluminium; stranded wire, cables, plaited bands and the like, (not electrically insulated), with steel core

• 7614.10.00.00 With steel core6%

7614.90 Aluminium; stranded wire, cables, plaited bands and the like, (not electrically insulated), other than steel core

• 7614.90.00.00 Other6%

7615 Aluminium; table, kitchen or other household articles and parts thereof, pot scourers and scouring or polishing pads, gloves and the like, sanitary ware and parts thereof

7615.10 Aluminium; table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like

• Cast
• 7615.10.10.10 Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks6%
• 7615.10.10.90 Other6%
• 7615.10.30.00 Manufactured from foil of a thickness not exceeding 0,2 mm6%
• Other
• 7615.10.80.10 Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks6%
• 7615.10.80.90 Other6%

7615.20 Aluminium; sanitary ware and parts thereof

• 7615.20.00.00 Sanitary ware and parts thereof6%

7616 Aluminium; articles n.e.c. in chapter 76

7616.10 Aluminium; nails, tacks, staples (other than those of heading no. 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers and similar articles

• 7616.10.00.10 Self-locking bolts and nuts (of the type "Hi-lok")6%
• Other
• 7616.10.00.91 For use in certain types of aircraft6%
• 7616.10.00.99 Other6%

7616.91 Aluminium; cloth, grill, netting and fencing, of aluminium wire

• 7616.91.00.00 Cloth, grill, netting and fencing, of aluminium wire6%

7616.99 Aluminium; articles n.e.c. in heading 7616

• Cast
• 7616.99.10.10 Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft6%
• 7616.99.10.20 "Quick change" apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft6%
• Other
• 7616.99.10.91 Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks6%
• 7616.99.10.99 Other6%
• Other
• Hand-made
• 7616.99.90.01 Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks6%
• 7616.99.90.09 Other6%
• Other
• 7616.99.90.20 "Quick change" apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft6%
• 7616.99.90.30 Plates and sheets of variable thickness of widths of 1 200 mm or more, for use in certain types of aircraft6%
• 7616.99.90.70 Connecting components for use in the production of helicopter tail rotor shafts6%
• 7616.99.90.77 Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body6%
• Other
• 7616.99.90.91 Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks6%
• 7616.99.90.99 Other6%