38 Chemical products n.e.c.

3801 Artificial graphite; colloidal or semi-colloidal graphite; preparations based on graphite or other carbon in the form of pastes, blocks, plates or other semi-manufactures

3801.10 Graphite; artificial

• 3801.10.10.00 Powders containing not more than 0,05 % of ash by weightFree
• Other
• 3801.10.90.15 In blocks or cylinders with an apparent density of 1.5 g/cm³ or more and an electrical resistivity of 7.0 μ.ω.m or less with a nominal diameter of more than 350 mmFree
• 3801.10.90.85 OtherFree

3801.20 Graphite; colloidal or semi-colloidal

• 3801.20.10.00 Colloidal graphite in suspension in oil; semi-colloidal graphiteFree
• 3801.20.90.00 OtherFree

3801.30 Carbonaceous pastes; for electrodes and similar pastes for furnace linings

• 3801.30.00.00 Carbonaceous pastes for electrodes and similar pastes for furnace liningsFree

3801.90 Graphite or other carbon based preparations; in the form of pastes, blocks, plates or other semi-manufactures

• 3801.90.00.10 Expandable graphite (cas rn 90387-90-9 and cas rn 12777-87-6)Free
• Other
• 3801.90.00.80 In blocks or cylinders with an apparent density of 1.5 g/cm³ or more and an electrical resistivity of 7.0 μ.ω.m or less with a nominal diameter of more than 350 mmFree
• 3801.90.00.85 OtherFree

3802 Activated carbon; activated natural mineral products; animal black, including spent animal black

3802.10 Carbon; activated

• 3802.10.00.10 Mixture of activated carbon and polyethylene, in form of powderFree
• 3802.10.00.40 Chemically activated carbon for the absorption and desorption of vapors, in a defined or irregular shape with an effective butane capacity of 5 g butane / 100 ml or more (according to astm d 5228)Free
• 3802.10.00.90 OtherFree

3802.90 Chemical products; activated natural mineral products, animal black, including spent animal black

• Soda flux calcinated diatomaceous earth
• 3802.90.00.11 Soda flux calcinated diatomaceous earth, acid washed, for use as a filter aid in the manufacture of pharmaceutical and/or biochemical productsFree
• 3802.90.00.19 OtherFree
• 3802.90.00.90 OtherFree

3803 Tall oil, whether or not refined

3803.00 Chemical products; tall oil, whether or not refined

• 3803.00.10.00 CrudeFree
• 3803.00.90.00 OtherFree

3804 Residual lyes from the manufacture of wood pulp, whether or not concentrated, desugared or chemically treated, including lignin sulphonates, but excluding tall oil of heading no. 3803

3804.00 Lyes, residual; from the manufacture of wood pulp, whether or not concentrated, desugared or chemically treated, including lignin sulphonates but excluding tall oil of heading no. 3803

• 3804.00.00.10 Sodium lignosulphonate (cas rn 8061-51-6)Free
• 3804.00.00.90 OtherFree

3805 Gum, wood or sulphate turpentine, other terpenic oils; crude dipentene; sulphite turpentine, other crude para-cymene; pine oil containing alpha-terpineol as the main constituent

3805.10 Terpenic oils; gum, wood or sulphate turpentine oils

• 3805.10.10.00 Gum turpentineFree
• 3805.10.30.00 Wood turpentineFree
• 3805.10.90.00 Sulphate turpentineFree

3805.90 Terpenic oils; produced by the treatment of coniferous woods, crude dipentene, sulphite turpentine and other crude para-cymene, n.e.c. in heading no. 3805

• 3805.90.10.00 Pine oilFree
• 3805.90.90.00 OtherFree

3806 Rosin and resin acids and derivatives thereof; rosin spirit and rosin oils; run gums

3806.10 Rosin and resin acids

• 3806.10.00.10 Obtained from fresh oleoresinsFree
• 3806.10.00.90 OtherFree

3806.20 Rosin and resin; salts of rosin, of resin acids or of derivatives of rosin or resin acids, other than salts of rosin adducts

• 3806.20.00.00 Salts of rosin, of resin acids or of derivatives of rosin or resin acids, other than salts of rosin adductsFree

3806.30 Ester gums

• 3806.30.00.00 Ester gumsFree

3806.90 Rosin; spirit and oils, n.e.c. in heading no. 3806

• 3806.90.00.00 OtherFree

3807 Wood tar; wood tar oils; wood creosote; wood naphtha; vegetable pitch; brewers' pitch and similar preparations based on rosin, resin acids or on vegetable pitch

3807.00 Wood tar; wood tar oils; wood creosote; wood naphtha; vegetable pitch; brewers' pitch and similar preparations based on rosin, resin acids or on vegetable pitch

• 3807.00.10.00 Wood tarFree
• 3807.00.90.00 OtherFree

3808 Insecticides, rodenticides, fungicides, herbicides, anti-sprouting products, plant growth regulators, disinfectants and the like, put up in forms or packings for retail sale or as preparations or articles

3808.52 Insecticides and the like; containing goods specified in Subheading Note 1 to this Chapter; for retail sale or as preparations or articles; DDT (ISO) (clofenotane (INN)), in packings of 300g or less

• 3808.52.00.00 Ddt (iso) (clofenotane (inn)), in packings of a net weight content not exceeding 300 g4%

3808.59 Insecticides, rodenticides, fungicides, disinfectants, herbicides and the like; containing goods specified in Subheading Note 1 to this Chapter; not DDT (ISO) (clofenotane (INN)), put up in forms or packings for retail sale or as preparations or articles

• 3808.59.00.10 Preparation containing perfluorooctanesulfonic acid and its salts, used as pesticide (cas 1763-23-1 )4%
• 3808.59.00.15 Camphechlor and its preparations (cas 8001-35-2)4%
• 3808.59.00.20 Preparation containing ddt (iso), used as pesticide (cas 50-29-3)4%
• 3808.59.00.30 Preparation containing chlordane (iso), used as pesticide (cas 57-74-9)4%
• 3808.59.00.40 Preparation containing lindane (iso, inn) (γ-hch (iso)), used as pesticide (cas 58-89-9)4%
• 3808.59.00.50 Preparation containing dieldrin (iso), used as pesticide (cas 60-57-1)4%
• 3808.59.00.60 Preparation containing endosulfan (iso), used as pesticide (cas 115-29-7)4%
• 3808.59.00.70 Preparation containing hexachlorobenzene, used as pesticide (cas 118-74-1)4%
• 3808.59.00.90 Other4%

3808.61 Insecticides and the like; containing goods specified in Subheading Note 2 to this Chapter; in packings of a net weight content not exceeding 300g; for retail sale or as preparations or articles

• 3808.61.00.00 In packings of a net weight content not exceeding 300 g6%

3808.62 Insecticides; containing goods specified in Subheading Note 2 to this Chapter; put up in forms or packings for retail sale or as preparations or articles, in packings of a net weight content exceeding 300g but not exceeding 7.5kg

• 3808.62.00.00 In packings of a net weight content exceeding 300 g but not exceeding 7,5 kg6%

3808.69 Insecticides; containing goods named in Subheading Note 2 to this Chapter, put up in forms or packings for retail sale or as preparations or articles, in packings of a net weight content exceeding 7.5kg

• 3808.69.00.00 Other6%

3808.91 Insecticides; other than containing goods specified in Subheading Notes 1 & 2 to this Chapter; put up in forms or packings for retail sale or as preparations or articles

• Based on pyrethroids
• 3808.91.10.10 Technical aerosols that contain hydrofluorocarbons (hfcs) with global warming potential (gwp) of 150 or more6%
• 3808.91.10.90 Other6%
• Based on chlorinated hydrocarbons
• 3808.91.20.10 Preparation containing mirex, used as insecticide (cas 2385-85-5)6%
• 3808.91.20.90 Other6%
• 3808.91.30.00 Based on carbamates6%
• 3808.91.40.00 Based on organophosphorus compounds6%
• Other
• 3808.91.90.15 Preparation containing endrin (iso), used as insecticide (cas 72-20-8)6%
• 3808.91.90.25 Preparation containing chlordecone (iso), used as insecticide (cas 143-50-0)6%
• 3808.91.90.30 Preparation containing endospores or spores and protein crystals derived from either: - bacillus thuringiensis berliner subsp. aizawai and kurstaki or, - bacillus thuringiensis subsp. kurstaki or, - bacillus thuringiensis subsp. israelensis or, - bacillus thuringiensis subsp. aizawai or, - bacillus thuringiensis subsp. tenebrionis6%
• 3808.91.90.40 Spinosad (iso)6%
• 3808.91.90.60 Spinetoram (iso) (cas rn 935545-74-7), preparation of two spinosyn components (3'-ethoxy-5,6-dihydro spinosyn j) and (3'-ethoxy- spinosyn l)6%
• 3808.91.90.90 Other6%

3808.92 Fungicides; other than containing goods specified in Subheading Note 1 to this Chapter; put up in forms or packings for retail sale or as preparations or articles

• Inorganic
• 3808.92.10.00 Preparations based on copper compounds4%
• 3808.92.20.00 Other6%
• Other
• 3808.92.30.00 Based on dithiocarbamates6%
• 3808.92.40.00 Based on benzimidazoles6%
• 3808.92.50.00 Based on diazoles or triazoles6%
• 3808.92.60.00 Based on diazines or morpholines6%
• 3808.92.90.00 Other6%

3808.93 Herbicides, anti-sprouting products and plant-growth regulators; other than containing goods of Subheading Note 1 to this Chapter; put up in forms or packings for retail sale or as preparations or articles

• Herbicides
• 3808.93.11.00 Based on phenoxy-phytohormones6%
• 3808.93.13.00 Based on triazines6%
• 3808.93.15.00 Based on amides6%
• 3808.93.17.00 Based on carbamates6%
• 3808.93.21.00 Based on dinitroaniline derivatives6%
• 3808.93.23.00 Based on derivatives of urea, of uracil or of sulphonylurea6%
• 3808.93.27.00 Other6%
• 3808.93.30.00 Anti-sprouting products6%
• Plant-growth regulators
• 3808.93.90.10 Preparation, in the form of granules, containing by weight: - 38,8 % or more but not more than 41,2 % of gibberellin a3, or - 9,5 % or more but not more than 10,5 % of gibberellin a4 and a76%
• 3808.93.90.70 Preparation in the form of powder, containing by weight 90 % or more of gibberellin a4 and gibberellin a7 combined (cas rn 8030-53-3)6%
• 3808.93.90.90 Other6%

3808.94 Disinfectants; other than containing goods specified in Subheading Note 1 in this Chapter; put up in forms or packings for retail sale or as preparations or articles

• 3808.94.10.00 Based on quaternary ammonium salts6%
• Based on halogenated compounds
• 3808.94.20.20 Trichloroisocyanuric acid and preparations thereof, also referred to as ‘symclosene’ under the international non-propriatory name (inn)6%
• 3808.94.20.30 Bromochloro-5,5-dimethylimidazolidine-2,4-dione (cas rn 32718-18-6) containing: - 1,3-dichloro-5,5-dimethylimidazolidine-2,4-dione (cas rn 118-52-5), - 1,3-dibromo-5,5-dimethylimidazolidine-2,4-dione (cas rn 77-48-5), - 1-bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (cas rn 16079-88-2), and/or - 1-chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (cas rn 126-06-7)6%
• 3808.94.20.40 Aqueous solution containing by weight: - 10,0 % or more but not more than 11,3 % of 5-chloro-2-methyl-2h-isothiazol-3-one, - 3,0 % or more but not more than 4,1 % of 2-methyl-2h-isothiazol-3-one, - a combined concentration of isothiazolones (cas rn 55965-84-9) of 13,0 % or more but not more than 15,4 %, - 18 % or more but not more than 22 % of nitrates, calculated as sodium nitrate, and - 5 % or more but not more than 8 % of chlorides, calculated as sodium chloride6%
• 3808.94.20.90 Other6%
• Other
• 3808.94.90.10 Technical aerosols that contain hydrofluorocarbons (hfcs) with global warming potential (gwp) of 150 or more6%
• 3808.94.90.90 Other6%

3808.99 Rodenticides and other similar products n.e.c. in heading no. 3808.9; other than containing goods specified in Subheading Note 1 in this Chapter, put up in forms or packings for retail sale or as preparations or articles

• 3808.99.10.00 Rodenticides6%
• Other
• 3808.99.90.10 Preparation containing dicofol (iso) (cas 115-32-2)6%
• 3808.99.90.30 Milbemycin oxime (cas rn 129496-10-2), mixture of methyl analogue and ethyl analogue, with a purity by weight of 95 % or more6%
• 3808.99.90.90 Other6%

3809 Finishing agents, dye carriers to accelerate the dyeing, fixing of dyestuffs, other products and preparations, of a kind used in the textile, paper, leather or like industries, n.e.c. or included

3809.10 Finishing agents and dye carriers; to accelerate dyeing or fixing of dye-stuffs, other products and preparations, used in textile, paper, leather etc industries, with basis of amylaceous substances, n.e.c.

• 3809.10.10.00 Containing by weight less than 55 % of such substances8%
• 3809.10.30.00 Containing by weight 55 % or more but less than 70 % of such substances8%
• 3809.10.50.00 Containing by weight 70 % or more but less than 83 % of such substances8%
• 3809.10.90.00 Containing by weight 83 % or more of such substances8%

3809.91 Finishing agents and dye carriers; to accelerate dyeing or fixing of dye-stuffs, other products and preparations, used in the textile industry (excluding those with a basis of amylaceous substances)

• 3809.91.00.30 Aqueous antimony pentoxide mixture containing by weight: -46 % or more but not more than 55 % of antimony pentoxide (cas rn 1314-60-9), and -1 % or more but not more than 10 % of triethanolamine (cas rn 102-71-6), or -1 % or more but not more than 10 % of triethanolamine phosphate (cas rn 10017-56-8)6%
• 3809.91.00.90 Other6%

3809.92 Finishing agents and dye carriers; to accelerate dyeing or fixing of dye-stuffs, other products and preparations, used in the paper industry (excluding those with a basis of amylaceous substances)

• 3809.92.00.00 Of a kind used in the paper or like industries6%

3809.93 Finishing agents and dye carriers; to accelerate dyeing or fixing of dye-stuffs, other products and preparations, used in the leather or like (excluding paper and textile) industries, (excluding those with a basis of amylaceous substances)

• 3809.93.00.00 Of a kind used in the leather or like industries6%

3810 Metal-pickling preparations; fluxes etc for soldering, brazing; welding powders, pastes of metal and other materials; preparations used as cores or coatings for welding electrodes or rods

3810.10 Pickling preparations for metal surfaces; soldering, brazing or welding powders and pastes consisting of metal and other materials

• 3810.10.00.10 Tin or zinc based, halide free, surface mount technology processing solder paste: -with metal contents of 87,5 % or more, but not more than 90,1 % by weight, -with an alloy solidus temperature of 210°c or more, -with a viscosity of 178 pa·s or more, but not more than 235 pa·s, -with a particle size of 40 µm or less, -with a silver content either of 3,15 % or more, but not more than 3,5 % by weight for tin based paste or of 0,25 % or more, but not more than 0,28 % by weight for zinc based paste, -with or without bismuth content of 2,55 % or more, but not more than 2,71 % by weight, -with or without copper content of 0,6 % or more, but not more than 0,7 % by weightFree
• 3810.10.00.90 OtherFree

3810.90 Fluxes and other auxiliary preparations; for soldering, brazing or welding, or preparations used as cores or coatings for welding electrodes or rods

• 3810.90.10.00 Preparations of a kind used as cores or coatings for welding electrodes and rodsFree
• 3810.90.90.00 OtherFree

3811 Anti-knock preparations, oxidation and gum inhibitors, viscosity improvers, anti-corrosive preparations and the like, for mineral oils (including gasoline) or other liquids used for the same purposes

3811.11 Anti-knock preparations; based on lead compounds

• 3811.11.10.00 Based on tetraethyl-lead6%
• 3811.11.90.00 Other4%

3811.19 Anti-knock preparations; other than those based on lead compounds

• 3811.19.00.10 Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than: - 4,9 % of 1,2,4-trimethyl-benzene, - 4,9 % of naphthalene, and - 0,5 % of 1,3,5-trimethyl-benzene4%
• 3811.19.00.90 Other4%

3811.21 Lubricating oil additives; containing petroleum oils or oils obtained from bituminous minerals

• 3811.21.00.11 Dispersing agent and oxidation inhibitor containing : - o-amino polyisobutylenephenol (cas rn 78330-13-9), - more than 30 % by weight but not more than 50 % by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.12 Dispersing agent containing : - esters of polyisobutenyl succinic acid and pentaerythritol (cas rn 103650-95-9), - 35 % or more but not more than 55 % by weight of mineral oils and - with a chlorine content of not more than 0,05 % by weight, used in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.13 Additives containing : - borated magnesium (c16-c24) alkylbenzene sulphonates and - mineral oils, having a total base number (tbn) of more than 250, but not more than 350, for use in the manufacture of lubricating oils4%
• 3811.21.00.14 Dispersing agent : - containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (cas rn 147880-09-9), - containing 35 % or more but not more than 55 % by weight of mineral oils, - with a chlorine content by weight of not more than 0,05 %, - having a total base number of less than 15, used in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.16 Detergent containing : - calcium salt of beta-aminocarbonyl alkylphenol (reaction product mannich base of alkylphenol) - 40 % or more but not more than 60 % by weight of mineral oils and - having a total base number more than 120 used in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.19 Additives containing: - a polyisobutylene succinimide based mixture, and - more than 30 % but not more than 50 % by weight of mineral oils, having a total base number of more than 40, for use in the manufacture of lubricating oils4%
• 3811.21.00.20 Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil4%
• 3811.21.00.21 Additive containing by weight: -90 % or more but not more than 97 % of reaction products of butyl-cyclohex-3-enecarboxylate and sulphur (cas rn 160305-95-3), -3 % or more but not more than 10 % of mineral oil, for use in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.22 Additive consisting essentially of: -polyisobutenyl succinic anhydride (cas rn 192662-34-3) reaction product with n,n-diethylaminoethanol (cas rn 100-37-8), -25 % or more by weight, but not more than 40 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.24 Additive consisting essentially of: -polyisobutenyl succinic anhydride reaction product with polyethylenepolyamines, borated (cas rn 134758-95-5), with a chlorine content by weight of 0,05 % or more but not more than 0,25 % and a total base number (tbn) of more than 20, -45 % and more by weight and no more than 55 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.25 Additives containing: - a (c8-18) alkyl polymethacrylate copolymer with n-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (mw) of more than 10,000 but not more than 20,000, and - more than 15 % , but not more than 30 % by weight of mineral oils, for use in the manufacture of lubricating oils4%
• 3811.21.00.26 Additive consisting essentially of: -phosphorodithioic acid, mixed o,o-bis (1,3-dimethylbutyl and isopropyl) esters, zinc salts (cas rn 84605-29-8), -7 % or more by weight but not more than 12 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.27 Additives containing: -10 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, and -mineral oils, for use in the manufacture of lubricating oils4%
• 3811.21.00.28 Additive consisting essentially of: -zinc bis(o,o-bis(2-ethylhexyl)) bis (dithiophosphate) (cas rn 4259-15-8); -triphenyl phosphite (cas rn 101-02-0) more than 0,5 % by weight but not more than 6 % by weight, -o,o,o-triphenyl phosphorothioate (cas rn 597-82-0) more than 0,5 % by weight but not more than 6 % by weight, and not more than 7,5 % by weight of the combination of triphenylphosphorus compounds -10 % or more by weight but not more than 20 % by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.29 Additive containing by weight: -25 % or more but not more than 40 % of calcium c16-24 alkylbenzenesulphonates (cas rn 70024-69-0), -30 % or more but not more than 65 % of mineral oils, for use in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.30 Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process4%
• 3811.21.00.32 Additive consisting essentially of: -zinc o,o,o',o'-tetrakis (1,3-dimethylbutyl) bis(phosphorodithioate) (cas rn 2215-35-2), -4 % or more by weight but not more than 12 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.33 Additives containing: - calcium salts of heptylphenol reaction products with formaldehyde (cas rn 84605-23-2), and - mineral oils, having a total base number (tbn) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils4%
• 3811.21.00.34 Detergent containing: -benzenesulfonic acid, methyl-, mono-c20-24-branched alkyl derivs., calcium salts (cas rn 722503-68-6), -more than 30 % but not more than 60 % by weight of mineral oils, and, -having a total base number of more than 310 but not more than 340, used in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.37 Additives containing: - a styrene-maleic anhydride copolymer esterified with c4-c20 alcohols, modified by aminopropylmorpholine, and - more than 50 % but not more than 75 % by weight of mineral oils, for use in the manufacture of lubricating oils4%
• 3811.21.00.38 Solution of mineral oils (cas rn 64742-52-5, 64742-53-6, 64742-56-9 or blends thereof) containing by weight: -25 % or more but not more than 55 % of the barium, calcium, magnesium or zinc salt of dinonylnaphthylsulphonic acid (cas rn 25619-56-1, 28015-99-8, 28016-00-4, or 57855-77-3) -whether or not, not more than 25 % of the barium, calcium, magnesium or zinc salt of a mixture of c3-c24 carboxylic acids (cas rn 68990-37-4)4%
• 3811.21.00.48 Additives containing: - overbased magnesium (c20-c24) alkylbenzenesulphonates (cas rn 231297-75-9) and - by weight more than 25% but not more than 50% of mineral oils, - having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils or for use in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.53 Additives containing: - overbased calcium petroleum sulphonates (cas 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and - by weight more than 40 % but not more than 60 % of mineral oil, having a total base number of 280 or more but not more than 420,for use in the manufacture of lubricating oils4%
• 3811.21.00.55 Additives containing: - low base number calcium polypropylbenzenesulphonate (cas rn 75975-85-8) and - by weight more than 40 % but not more than 60 % mineral oils, having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils4%
• 3811.21.00.60 Additives for lubricating oils, containing mineral oils, - based on calcium polypropylenyl substituted benzenesulphonate (cas rn 75975-85-8) with a content by weight of 25 % or more but not more than 35 %, - with a total base number (tbn) of 280 or more but not more than 320, used as a concentrated additive for the manufacture of engine oils through a blending process4%
• 3811.21.00.63 Additives containing: - an overbased mixture of calcium petroleum sulphonates (cas rn 61789-86-4) and synthetic calcium alkylbenzenesulphonates (cas rn 68584-23-6 and cas rn 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 % and - by weight more than 40 % but not more than 60 % of mineral oils, having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils4%
• 3811.21.00.65 Additives containing: - a polyisobutylene succinimide based mixture (cas rn 160610-76-4), and - more than 35 % but not more than 50 % by weight of mineral oils, having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils4%
• 3811.21.00.70 Additives for lubricating oils, - containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (cas rn 84605-20-9), - containing mineral oils, - with a chlorine content by weight of 0,05 % or more but not more than 0,25 %, - with a total base number (tbn) of more than 20, used as a concentrated additive for the manufacture of engine oils through a blending process4%
• 3811.21.00.73 Additives containing: - borated succinimide compounds (cas rn 134758-95-5), - mineral oils, and - having a total base number (tbn) greater than 40, for use in the manufacture of additive mixtures for lubricating oils4%
• 3811.21.00.75 Additives containing: - calcium (c10-c14) dialkylbenzenesulfonates, - more than 40 %, but not more than 60 % by weight of mineral oils, with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils4%
• 3811.21.00.77 Antifoam additives consisting of: - a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and - more than 50 % but not more than 80 % by weight of mineral oils for use in the manufacture of additive blends for lubricating oils4%
• 3811.21.00.80 Additives containing : - polyisobutylene aromatic polyamine succinimide, - more than 40 % but not more than 60 % by weight of mineral oils, with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils4%
• 3811.21.00.83 Additives containing: - polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (cas rn 84605-20-9), - containing more than 31,9 % but not more than 43,3 % by weight of mineral oils, - not more than 0,05 % by weight chlorine, and - having a total base number (tbn) greater than 20, for use in the manufacture of additives blends for lubricating oils4%
• 3811.21.00.85 Additives, - containing more than 20 % but not more than 45 % by weight of mineral oils, - based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated, for use in the manufacture of blends of additives4%
• 3811.21.00.90 Other4%

3811.29 Lubricating oil additives; not containing petroleum oils or oils obtained from bituminous minerals

• 3811.29.00.20 Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with c12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils4%
• 3811.29.00.23 Additive for lubricating oils consisting of molybdenum, bis(dibutylcarbamodithioato)di-μ-oxodioxodi-, sulfurized (cas rn 68412-26-0)4%
• 3811.29.00.30 Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (cas rn 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process4%
• 3811.29.00.33 Additives for lubricating oils, consisting of a mixture of n,n-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (cas rn 866259-61-2), used in the manufacture of blends of additives for lubricating oils4%
• 3811.29.00.38 Additives consisting of the c12-c14-tert-alkylamine salts of the esters of c14-c18 saturated and c18 unsaturated alcohols with phosphorus pentoxide (cas rn 1471315-74-8), for use in the manufacture of blends of additives for lubricating oils or greases4%
• 3811.29.00.40 Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (cas rn 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils4%
• 3811.29.00.43 Reaction products of c14-c18 (branched and linear) and c18 (unsaturated) fatty acids with tetraethylenepentamine (linear, branched, cyclic) (cas rn 68784-17-8), for use in the manufacture of lubricating oils4%
• 3811.29.00.45 Additives consisting of a mixture of (c7-c9) dialkyl adipates, in which diisooctyl adipate (cas rn 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils4%
• 3811.29.00.48 Mixed c12-c20-alkyl and c14-c18-unsaturated alkyl derivates of phosphonic acid (cas rn 93925-25-8), containing by weight more than 80 % of oleyl, palmityl and stearyl groups, for use in the manufacture of lubricating oils4%
• 3811.29.00.57 Additives consisting of reaction products of diphenylamine and branched nonenes with: - more than 20 % but not more than 50 % by weight 4-monononyldiphenylamine, and - more than 50 % but not more than 80 % by weight 4,4'-dinonyldiphenylamine, - a total percentage of 2,4-dinonyldiphenylamine and 2,4'-dinonyldiphenylamine of not more than 15 % by weight, used for the manufacture of lubricating oils4%
• 3811.29.00.75 Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (cas rn 67124-09-8), used in the manufacture of blends of additives for lubricating oils4%
• 3811.29.00.79 Additives, consisting of the reaction products of 1,3,4-thiadiazolidine-2,5-dithione with hydrogen peroxide and tert-nonanethiol, containing by weight: - 70 % or more of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (cas rn 89347-09-1), and - 10 % or more of 5-(tert-nonyldithio)-1,3,4-thiadiazole-2(3h)-thione (cas rn 97503-12-3), for use in the manufacture of blends of additives for lubricating oils4%
• 3811.29.00.85 Additives consisting of a mixture of 3-((c9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, c10-rich (cas rn 398141-87-2), for use in the manufacture of lubricating oils4%
• 3811.29.00.90 Other4%

3811.90 Oxidation and gum inhibitors, viscosity improvers, anti-corrosive preparations, other prepared additives for mineral oils or liquids used as mineral oils (including gasoline), n.e.c. in heading no. 3811

• 3811.90.00.40 Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 10% or more but not more than 29,9% of 2-ethylhexanol4%
• 3811.90.00.50 Corrosion inhibitor containing : - polyisobutenyl succinic acid and - more than 5 % and not more than 20 % by weight of mineral oils for use in the manufacture of blends of additives for fuels4%
• 3811.90.00.60 Solution of mineral oils (cas rn 64742-52-5, 64742-53-6, 64742-56-9 or blends thereof) containing by weight: -25 % or more but not more than 55 % of the barium, calcium, magnesium or zinc salt of dinonylnaphthylsulphonic acid (cas rn 25619-56-1, 28015-99-8, 28016-00-4, or 57855-77-3) -whether or not, not more than 25 % of the barium, calcium, magnesium or zinc salt of a mixture of c3-c24 carboxylic acids (cas rn 68990-37-4)4%
• 3811.90.00.90 Other4%

3812 Prepared rubber accelerators; compound plasticisers for rubber or plastics, n.e.c. or included; anti-oxidising preparations and other compound stabilisers for rubber or plastics

3812.10 Rubber accelerators; prepared

• 3812.10.00.10 Rubber accelerator based on diphenyl guanidine granules (cas rn 102-06-7)Free
• 3812.10.00.30 Vulcanization accelerator, consisting by weight of: -98 % or more of n-tert-butyl bis(2-benzothiazolesulfen) amide (cas rn 3741-80-8) -not more than 2 % of white mineral oil (cas rn 8042-47-5)Free
• 3812.10.00.90 OtherFree

3812.20 Plasticisers, compound; for rubber or plastics

• 3812.20.10.00 Reaction mixture containing benzyl 3-isobutyryloxy-1-isopropyl-2,2-dimethylpropyl phthalate and benzyl 3-isobutyryloxy-2,2,4-trimethylpentyl phthalateFree
• Other
• 3812.20.90.10 Plasticizer, containing: - bis(2-ethylhexyl)-1,4-benzene dicarboxylate (cas rn 6422-86-2) - more than 10 % but not more than 60 % by weight of dibutylterephthalate (cas rn 1962-75-0)Free
• 3812.20.90.20 1,2-benzenedicarboxylic acid, di-c6-8-branched alkyl esters, c7-rich (cas rn 71888-89-6) (cas rn 71888-89-6)Free
• 3812.20.90.30 1,2-benzenedicarboxylic acid, di-c7-11-branched and linear alkyl esters (cas rn 68515-42-4)Free
• 3812.20.90.40 N-pentyl-isopentylphthalate (cas rn 776297-69-9)Free
• 3812.20.90.90 OtherFree

3812.31 Anti-oxidising preparations and other compound stabilisers; for rubber or plastics, mixtures of oligomers of 2,2,4-trimethyl-1,2-dihydroquinoline (TMQ)

• 3812.31.00.00 Mixtures of oligomers of 2,2,4-trimethyl-1,2-dihydroquinoline (tmq)Free

3812.39 Anti-oxidising preparations and other compound stabilisers; for rubber or plastics, other than mixtures of oligomers of 2,2,4-trimethyl-1,2-dihydroquinoline (TMQ)

• 3812.39.10.00 Anti-oxidising preparationsFree
• Other
• 3812.39.90.23 Uv stabilizer, containing by weight: -more than 97 % but not more than 99,8 % of bis(2,4-dicumylphenyl)pentaerythritol diphosphite (cas rn 154862-43-8) and -more than 0,2 % but not more than 2 % of triisopropanolamine (cas rn 122-20-3)Free
• 3812.39.90.25 Uv photo stabiliser containing: - α-[3-[3-(2h-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (cas rn 104810-48-2); - α-[3-[3-(2h-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2h-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (cas rn 104810-47-1); - polyethylene glycol of a weight average molecular weight (mw) of 300 (cas rn 25322-68-3) - bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (cas rn 41556-26-7), and - methyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (cas rn 82919-37-7)Free
• 3812.39.90.28 Uv stabilizer based on a mixture of -reaction mass of poly(oxy-1,2-ethanediyl), .alpha.-[3-[3-(2h-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-.omega.-hydroxy- and poly(oxy-1,2-ethanediyl), .alpha.-[3-[3-(2h-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-.omega.-[3-[3-(2h-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1- oxopropoxy] (ec number 400-830-7) with a purity by weight of 60 % or more, but not more than 80 %, and -reaction mass of bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate (cas rn 1065336-91-5) with a purity by weight of 25 % or more, but not more than 40 %Free
• 3812.39.90.33 Uv stabilizer based on: -a mixture of branched and linear c7-c9 alkyl 3-[3-(2h-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]propionates (cas rn 127519-17-9) with a content by weight of 40 % or more, but not more than 60 %, and -a mixture of: bis(2,2,6,6-tetramethyl-1-octyloxypiperidin-4-yl)-1,10-decanedioate and 1,8-bis[(2,2,6,6-tetramethyl-4-((2,2,6,6-tetramethyl-1-octyloxypiperidin-4-yl)-decan-1,10-dioyl)piperidin-1-yl)oxy]octane (cas rn 129757-67-1) with a content by weight of 40 % or more, but not more than 60 %Free
• 3812.39.90.35 Mixture containing by weight: - 25 % or more but not more than 55 % of a mixture of c15-18 tetramethylpiperidinyl esters (cas rn 86403-32-9) - not more than 20 % of other organic compounds - on a carrier of polypropylene (cas rn 9003-07-0) or amorphous silica (cas rn 7631-86-9 or 112926-00-8)Free
• 3812.39.90.38 Uv stabiliser containing by weight: -75 % or more but not more than 95 % of the reaction product of 2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-hydroxyphenol with ((c10-16, rich in c12-13 alkyloxy) methyl) oxyrane -5 % or more but not more than 25 % of 1-methoxy-2-propanol (cas rn 107-98-2)Free
• 3812.39.90.40 Mixture of: - 80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (cas rn 57583-35-4), and - 20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (cas rn 57583-34-3)Free
• 3812.39.90.43 Reaction mass containing by weight: -more than 45 % but not more than 49 % of octyl 3-[3-tert-butyl-4-hydroxy-5-(5-chloro-2h-benzotriazol-2-yl)phenyl]propionate (cas rn 83044-89-7), and -more than 49 % but not more than 53 % of 2-ethylhexyl 3-[3-tert-butyl-4-hydroxy-5-(5-chloro-2h-benzotriazol-2-yl) phenyl]propionate (cas rn 83044-90-0)Free
• 3812.39.90.45 2-aminoethanol reaction products with cyclohexane and peroxidized n-butyl-2,2,6,6-tetramethyl-4-piperidinamine-2,4,6-trichloro-1,3,5-triazine reaction products (cas rn 191743-75-6) with a purity by weight of 99 % or moreFree
• 3812.39.90.48 Uv stabilizer (cas rn 129757-67-1), reaction mass containing by weight 97 % or more of: -bis[2,2,6,6-tetramethyl-1-(octyloxy)piperidin-4-yl] decanedioate, and -1,1'-bis[2,2,6,6-tetramethyl-1-(octyloxy)piperidin-4-yl] 10,10'-{octane-1,8-diylbis[oxy(2,2,6,6- tetramethylpiperidine-1,4-diyl)]} didecanedioateFree
• 3812.39.90.50 Reaction mass of 2-ethylhexyl 10-ethyl-4,4-dioctyl-7-oxo- 8-oxa-3,5-dithia-4-stannatetradecanoate and 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-octyl- 7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (reaction mass of dote and mote)Free
• 3812.39.90.53 Light stabilizer, containing by weight more than 90 % of reaction products of stearate methyl ester with 1-(2-hydroxy-2-methylpropoxy)-2,2,6,6-tetramethyl-4-piperidinol (cas rn 300711-92-6)Free
• 3812.39.90.55 Uv stabilizer, containing: - 2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (cas rn 2725-22-6) and - either n,n'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (cas rn 193098-40-7) or - n,n'-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (cas rn 82451-48-7)Free
• 3812.39.90.65 Stabiliser for plastic material containing: - 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (cas rn 57583-35-4), - 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (cas rn 57583-34-3), and - 2-ethylhexyl mercaptoacetate (cas rn 7659-86-1)Free
• 3812.39.90.75 Uv stabilizer containing a mixture of: - branched and linear c7 to c9 alkyl esters of [3-(2h-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxy]-1-phenylpropanoic acid (cas rn 127519-17-9 ) with a content by weight of 85% or more, and - 2-methoxy-1-methylethyl acetate (cas rn 108-65-6) with a content by weight of not more than 8%.Free
• 3812.39.90.80 Uv-stabilizer, consisting of: - a hindered amine: n,n'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (cas rn 193098-40-7) and - either an o-hydroxyphenyl triazine uv light absorber or - a chemically modified phenolic compoundFree
• 3812.39.90.90 OtherFree

3813 Preparations and charges for fire extinguishers; charged fire-extinguishing grenades

3813.00 Fire-extinguishers; preparations and charges and charged fire-extinguishing grenades

• 3813.00.00.10 Preparations and charges for fire-extinguishers, of mentioned in code 8424, for use in certain types of aircraftFree
• 3813.00.00.90 OtherFree

3814 Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or varnish removers

3814.00 Solvents and thinners; organic composite solvents and thinners, n.e.c. or included, prepared paint or varnish removers

• Based on butyl acetate
• 3814.00.10.10 Ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union), denatured or undenatured, excluding products with a water content of more than 0,3 % (m/m) measured according to the standard en 15376, but including ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union) contained in blends with gasoline with an ethyl alcohol content of more than 10 % (v/v)Free
• 3814.00.10.90 OtherFree
• Other
• 3814.00.90.40 Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl etherFree
• 3814.00.90.70 Ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union), denatured or undenatured, excluding products with a water content of more than 0,3 % (m/m) measured according to the standard en 15376, but including ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union) contained in blends with gasoline with an ethyl alcohol content of more than 10 % (v/v)Free
• 3814.00.90.99 OtherFree

3815 Reaction initiators, reaction accelerators and catalytic preparations n.e.c. or included

3815.11 Catalysts, supported; reaction initiators, reaction accelerators and catalytic preparations, with nickel or nickel compounds as the active substance, n.e.c. or included

• 3815.11.00.00 With nickel or nickel compounds as the active substance6%

3815.12 Catalysts, supported; reaction initiators, reaction accelerators and catalytic preparations, with precious metal or precious metal compounds as the active substance, n.e.c. or included

• 3815.12.00.40 Catalyst used to obtain paraxylene and orthoxylene by isomerization of methaxylene containing by weight: -60 % or more but not more than 95 % of aluminum oxide (cas rn 1344-28-1), -5 % or more but not more than 15 % of aluminosilicate (cas rn 1327-36-2), -not more than 2 % of platinum (cas rn 7440-06-4), -not more than 2 % aluminum chloride hydroxide (cas rn 12042-91-0), -not more than 0,2 % of hydrogen sulfide (cas rn 7783-06-4)6%
• 3815.12.00.50 Catalyst in the form of granules, wheels or ring-shaped structures -of a diameter of 3 mm or more, but not exceeding 10 mm, -containing 8 % or more but not more than 40 % by weight of silver -on a carrier based on aluminium oxide, -with one or more promoters6%
• 3815.12.00.90 Other6%

3815.19 Catalysts, supported; reaction initiators, reaction accelerators and catalytic preparations, with an active substance other than nickel or precious metals or their compounds, n.e.c. or included

• 3815.19.10.00 Catalyst in the form of grains of which 90 % or more by weight have a particle-size not exceeding 10 micrometres, consisting of a mixture of oxides on a magnesium-silicate support, containing by weight: - 20 % or more but not more than 35 % of copper and - 2 % or more but not more than 3 % of bismuth, and of an apparent specific gravity of 0,2 or more but not exceeding 1,0Free
• Other
• 3815.19.90.10 Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm³/g or more (as determined by the nitrogen absorption method)6%
• 3815.19.90.30 Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene6%
• 3815.19.90.33 Catalyst, in powder form, consisting of a mixture of metal oxides fixed to a silicon dioxide support, with a total content by weight of molybdenum, bismuth and iron of 20 % or more but not more than 50 %, for use in the manufacture of acrylonitrile6%
• 3815.19.90.55 Components for a catalyst system, imported as single components or as set, made up of at least one of the following preparations: -ceramic material (cas rn 66402-68-4), -molybdenum oxide and nickel oxide supported on aluminium oxide, -molybdenum oxide, nickel oxide and aluminium phosphate supported on aluminium oxide, -molybdenum oxide, nickel oxide, aluminium phosphate, silica, and molybdenum supported on aluminium oxide, for use against organic and inorganic impurities in kerosene production6%
• 3815.19.90.70 Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide6%
• 3815.19.90.75 Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide6%
• 3815.19.90.80 Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil6%
• 3815.19.90.82 Catalyst consisting of organo-metallic compounds of boron, titanium and aluminium, fixed on a support of silicon dioxide, in the form of powder6%
• 3815.19.90.85 Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder6%
• 3815.19.90.86 Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins6%
• 3815.19.90.90 Other6%

3815.90 Reaction initiators, reaction accelerators and catalytic preparations, unsupported, n.e.c. or included

• 3815.90.10.00 Catalyst consisting of ethyltriphenylphosphonium acetate in the form of a solution in methanolFree
• Other
• 3815.90.90.16 Initiator based on dimethylaminopropyl urea6%
• 3815.90.90.30 Catalyst, consisting of a suspension in mineral oil of: - tetrahydrofuran complexes of magnesium chloride and titanium(iii) chloride; and - silicon dioxide - containing 6,6 % (± 0,6 %) by weight of magnesium, and - containing 2,3 % (± 0,2 %) by weight of titanium6%
• 3815.90.90.38 Photoinitiator, containing by weight: -80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (cas rn 886463-10-1), -not more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate6%
• 3815.90.90.43 Catalyst in powder form consisting by weight of -92,50 % (± 2) % titanium dioxide (cas rn 13463-67-7) -5 % (± 1) % silicon dioxide (cas rn 112926-00-8) and -2,5 % (± 1,5) % sulphur trioxide (cas rn 7446-11-9)6%
• 3815.90.90.48 Photoinitiator containing by weight: -88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1,2-ethanediyl) (cas rn 1246194-73-9), -not more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (cas rn 1648797-60-7)6%
• 3815.90.90.50 Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium6%
• 3815.90.90.55 Catalytic additives for fluid catalytic cracking (fcc), not containing y type zeolite (cas rn 308079-79-0), and not being a fcc (fluid catalytic cracking) base catalyst, in the form of powder, consisting of a mixture of one or more of the following active substances: -calcium carbonate (cas rn 471-34-1), -copper oxide (cas rn 1217-38-0), -iron oxide (cas rn 1309-37-1), -aluminium magnesium vanadium oxide (cas rn 70621-8-0), -vanadium pentoxide (cas rn 1314-62-1), -aluminium phosphate (cas rn 7784-30-7), -cerium oxide (cas rn 1306-38-3), -zsm-5 type zeolite (cas rn 308081-08-5), and one or more of the following inert substances: -magnesium oxide (cas rn 1309-48-8), -aluminium oxide (cas rn 1344-28-1), -kaolin (cas rn 1332-58-7)6%
• 3815.90.90.58 1,1′-bis(4-triethylsilylphenyl)methylene(cyclopentadienyl)(2,7-di-tert-butyl-9-fluorenyl)dimethylhafnium (cas rn 264926-41-2) in the form of a hexane (cas rn 110-54-3) solution, containing by weight 2,0 % or more but not more than 2,5 % of 1,1′-bis(4-triethylsilylphenyl)methylene(cyclopentadienyl)(2,7-di-tert-butyl-9-fluorenyl)dimethylhafnium6%
• 3815.90.90.60 Dinonylnaphthalenedisulfonic acid (cas rn 60223-95-2) with a content by weight of 50 % or more but not more than 65 %, in the form of a solution in isobutanol (cas rn 78-83-1)6%
• 3815.90.90.76 Catalyst consisting of titanium dioxide and tungsten trioxide6%
• 3815.90.90.81 Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate6%
• 3815.90.90.85 Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins6%
• 3815.90.90.88 Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis: - 4 % or more but not more than 10 % of titanium and - 10 % or more but not more than 20 % magnesium6%
• 3815.90.90.89 Rhodococcus rhodocrous j1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile6%
• 3815.90.90.90 Other6%

3816 Refractory cements, mortars, concretes and similar compositions, including dolomite ramming mix, other than products of heading 38.01

3816.00 Refractory cements, mortars, concretes and similar compositions, including dolomite ramming mix, other than products of heading 38.01

• 3816.00.10.00 Dolomite ramming mixFree
• 3816.00.90.00 OtherFree

3817 Mixed alkylbenzenes and mixed alkylnaphthalenes, other than those of heading no. 2707 or 2902

3817.00 Mixed alkylbenzenes and mixed alkylnaphthalenes, other than those of heading no. 2707 or 2902

• Linear alkylbenzenes
• 3817.00.50.10 Mixture of alkylbenzenes (c14-26) containing by weight: - 35 % or more but not more than 60 % of eicosylbenzene, - 25 % or more but not more than 50 % of docosylbenzene, - 5 % or more but not more than 25 % of tetracosylbenzene6%
• 3817.00.50.90 Other6%
• Other
• 3817.00.80.10 Mixture of alkylnaphthalenes, containing by weight: - 88 % or more but not more than 98 % of hexadecylnaphthalene - 2 % or more but not more than 12 % of dihexadecylnaphthalene6%
• 3817.00.80.20 Mixture of branched alkyl benzenes mainly containing dodecyl benzenes6%
• 3817.00.80.30 Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms6%
• 3817.00.80.90 Other6%

3818 Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics

3818.00 Chemical elements; doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics

• Doped silicon
• 3818.00.11.00 Wafers of a thickness not exceeding 200 micrometres, rectangular, whether or not with cut or rounded corners (so-called photovoltaic wafers)Free
• 3818.00.19.00 OtherFree
• 3818.00.90.00 OtherFree

3819 Hydraulic brake fluids and other prepared liquids for hydraulic transmission, not containing or containing less than 70% by weight of petroleum oils or oils obtained from bituminous minerals

3819.00 Hydraulic fluids; for brakes and other prepared liquids for hydraulic transmission, not containing or containing less than 70% by weight of petroleum oils or oils obtained from bituminous minerals

• 3819.00.00.10 Based on silicate or phosphoric esters, for use in certain types of aircraftFree
• 3819.00.00.90 OtherFree

3820 Anti-freezing preparations and prepared de-icing fluids

3820.00 Anti-freezing preparations and prepared de-icing fluids

• 3820.00.00.10 Ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union), denatured or undenatured, excluding products with a water content of more than 0,3 % (m/m) measured according to the standard en 15376, but including ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union) contained in blends with gasoline with an ethyl alcohol content of more than 10 % (v/v)Free
• 3820.00.00.90 OtherFree

3821 Prepared culture media for the development or maintenance of micro-organisms (including viruses and the like) or of plant, human or animal cells

3821.00 Prepared culture media for the development or maintenance of micro-organisms (including viruses and the like) or of plant, human or animal cells

• 3821.00.00.00 Prepared culture media for the development or maintenance of micro-organisms (including viruses and the like) or of plant, human or animal cellsFree

3822 Reagents; diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, whether or not put up in the form of kits, other than those of heading 30.06; certified reference materials

3822.11 Reagents; diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, whether or not put up in the form of kits; for malaria

• 3822.11.00.00 For malariaFree

3822.12 Reagents; diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, whether or not put up in the form of kits; for zika and other diseases transmitted by mosquitoes of the genus Aedes

• 3822.12.00.00 For zika and other diseases transmitted by mosquitoes of the genus aedesFree

3822.13 Reagents; diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, whether or not put up in the form of kits; for blood grouping

• 3822.13.00.00 For blood-groupingFree

3822.19 Reagents; diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, whether or not put up in the form of kits; n.e.c.in item 3822.1

• 3822.19.00.10 For sars-cov virus speciesFree
• 3822.19.00.90 OtherFree

3822.90 Reagents; diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, or put up in the form of kits, other than those of heading 30.06; certified reference materials, n.e.c. in heading 3822

• 3822.90.00.00 OtherFree

3823 Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols

3823.11 Industrial monocarboxylic fatty acids, acid oils from refining; stearic acid

• Of a kind used for animal feed
• 3823.11.00.20 Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengthsFree
• 3823.11.00.50 OtherFree
• Other
• 3823.11.00.70 Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengthsFree
• 3823.11.00.80 OtherFree

3823.12 Industrial monocarboxylic fatty acids, acid oils from refining; oleic acid

• Of a kind used for animal feed
• 3823.12.00.20 Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengthsFree
• 3823.12.00.50 OtherFree
• Other
• 3823.12.00.70 Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengthsFree
• 3823.12.00.80 OtherFree

3823.13 Industrial monocarboxylic fatty acids, acid oils from refining; tall oil fatty acids

• 3823.13.00.10 Of a kind used for animal feedFree
• 3823.13.00.90 OtherFree

3823.19 Industrial monocarboxylic fatty acids; acid oils from refining; (other than stearic acid, oleic acid or tall oil fatty acids)

• Distilled fatty acids
• Of a kind used for animal feed
• 3823.19.10.30 Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengthsFree
• 3823.19.10.50 OtherFree
• Other
• 3823.19.10.70 Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengthsFree
• 3823.19.10.80 OtherFree
• Fatty acid distillate
• Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of
• 3823.19.30.20 Industrial monocarboxylic fatty acids of heading 3823, stearic acid of heading 3823, stearic acid of heading 2915, palmitic acid of heading 2915Free
• 3823.19.30.30 Animal feed preparations of subheading 2309Free
• Other
• 3823.19.30.80 Of a kind used for animal feedFree
• 3823.19.30.89 OtherFree
• Other
• Palm acid oils from refining for use in the manufacture of
• 3823.19.90.20 Industrial monocarboxylic fatty acids of heading 3823, stearic acid of heading 3823, stearic acid of heading 2915, palmitic acid of heading 2915Free
• 3823.19.90.30 Animal feed preparations of subheading 2309Free
• Other
• Of a kind used for animal feed
• 3823.19.90.70 Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g and with a degree of split (dos) of at least 97%, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengthFree
• 3823.19.90.75 OtherFree
• Other
• 3823.19.90.95 Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g and with a degree of split (dos) of at least 97%, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengthFree
• 3823.19.90.98 OtherFree

3823.70 Industrial fatty alcohols

• 3823.70.00.10 Of a kind used for animal feedFree
• 3823.70.00.90 OtherFree

3824 Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included

3824.10 Binders, prepared; for foundry moulds or cores

• 3824.10.00.10 Based on synthetic resins6%
• 3824.10.00.90 Other6%

3824.30 Metal carbides, non-agglomerated; mixed together or with metallic binders

• Tungsten carbides
• 3824.30.00.10 In the form of irregular and non-free-flowing particles, simply mixed with metallic powder4%
• 3824.30.00.20 Ready-to-press powder, in the form of spherical or granular shaped, homogeneous and free-flowing particles, simply mixed with metallic powder and/or other carbides, and an organic binder4%
• 3824.30.00.30 Other, in the form of spherical or granular shaped, homogeneous and free-flowing particles, simply mixed with metallic powder and/or other carbides4%
• 3824.30.00.40 Other, simply mixed with metallic powder and/or other carbides4%
• 3824.30.00.90 Other4%

3824.40 Cements, mortars or concretes; their prepared additives

• 3824.40.00.00 Prepared additives for cements, mortars or concretes6%

3824.50 Mortars and concretes; non-refractory

• 3824.50.10.00 Concrete ready to pour6%
• 3824.50.90.00 Other6%

3824.60 Sorbitol; other than that of subheading no. 2905.44

• In aqueous solution
• 3824.60.11.00 Containing 2 % or less by weight of d-mannitol, calculated on the d-glucitol content6% + 13 GBP / 100 kg
• 3824.60.19.00 Other8% + 31 GBP / 100 kg
• Other
• 3824.60.91.00 Containing 2 % or less by weight of d-mannitol, calculated on the d-glucitol content6% + 19 GBP / 100 kg
• 3824.60.99.00 Other8% + 44 GBP / 100 kg

3824.81 Chemical products, mixtures and preparations; containing goods specified in Subheading Note 3 to this Chapter; containing oxirane (ethylene oxide)

• 3824.81.00.00 Containing oxirane (ethylene oxide)6%

3824.82 Chemical products, mixtures and preparations; containing goods specified in Subheading Note 3 to this Chapter; containing polychlorinated biphenyls (PCBs), polychlorinated terphenyls (PCTs) or polybrominated biphenyls (PBBs)

• 3824.82.00.10 Preparation containing polychlorinated biphenyls (pcbs)6%
• 3824.82.00.20 Preparation containing hexabromobiphenyl (cas 36355-01-8)6%
• 3824.82.00.90 Other6%

3824.83 Chemical products, mixtures and preparations; containing goods specified in Subheading Note 3 to this Chapter; containing tris(2,3-dibromopropyl) phosphate

• 3824.83.00.00 Containing tris(2,3-dibromopropyl) phosphate6%

3824.84 Chemical products, mixtures and preparations; containing aldrin, camphechlor (toxaphene), chlordane, chlordecone, DDT (chlorfenotane, 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane), dieldrin, endosulfan, endrin, heptachlor or mirex

• 3824.84.00.10 Preparation containing ddt (iso) (cas 50-29-3)6%
• 3824.84.00.15 Preparation containing camphechlor (iso)6%
• 3824.84.00.20 Preparation containing chlordane (iso) (cas 57-74-9)6%
• 3824.84.00.30 Preparation containing dieldrin (iso) (cas 60-57-1)6%
• 3824.84.00.40 Preparation containing endrin (iso) (cas 72-20-8)6%
• 3824.84.00.50 Preparation containing endosulfan (iso) (115-29-7)6%
• 3824.84.00.60 Preparation containing chlordecone (iso) (cas 143-50-0)6%
• 3824.84.00.70 Preparation containing mirex6%
• 3824.84.00.90 Other6%

3824.85 Chemical products, mixtures and preparations; containing goods specified in Subheading Note 3 to this Chapter; containing 1,2,3,4,5,6-hexachlorocyclohexane (HCH (ISO)), including lindane (ISO, INN)

• 3824.85.00.00 Containing 1,2,3,4,5,6-hexachlorocyclohexane (hch (iso)), including lindane (iso, inn)6%

3824.86 Chemical products, mixtures and preparations; containing goods specified in Subheading Note 3 to this Chapter; containing pentachlorobenzene (ISO) or hexachlorobenzene (ISO)

• 3824.86.00.00 Containing pentachlorobenzene (iso) or hexachlorobenzene (iso)6%

3824.87 Chemical products, mixtures and preparations; containing goods specified in Subheading Note 3 to this Chapter; containing perfluorooctane sulphonic acid, its salts, perfluorooctane sulphonamides, or perfluorooctane sulphonyl fluoride

• 3824.87.00.00 Containing perfluorooctane sulphonic acid, its salts, perfluorooctane sulphonamides, or perfluorooctane sulphonyl fluoride6%

3824.88 Chemical products, mixtures and preparations; containing goods specified in Subheading Note 3 to this Chapter; containing tetra-, penta-, hexa-, hepta- or octabromodiphenyl ethers

• 3824.88.00.00 Containing tetra-, penta-, hexa-, hepta- or octabromodiphenyl ethers6%

3824.89 Chemical products, mixtures and preparations; containing goods specified in Subheading Note 3 to this Chapter; containing short-chain chlorinated paraffins

• 3824.89.00.10 Alkanes, c10-13, chloro (cas 85535-84-8 )6%
• 3824.89.00.90 Other6%

3824.91 Chemical products, mixtures and preparations; consisting mainly of (5-ethyl-2-methyl-2-oxido-1,3,2-dioxaphosphinan-5-yl)methyl methyl methylphosphonate and bis[(5-ethyl-2-methyl-2-oxido-1,3,2-dioxaphosphinan-5-yl)methyl] methylphosphonate

• 3824.91.00.00 Mixtures and preparations consisting mainly of (5-ethyl-2-methyl-2-oxido-1,3,2-dioxaphosphinan-5-yl)methyl methyl methylphosphonate and bis[(5-ethyl-2-methyl-2-oxido-1,3,2-dioxaphosphinan-5-yl)methyl] methylphosphonate6%

3824.92 Chemical products, mixtures and preparations; polyglycol esters of methylphosphonic acid

• 3824.92.00.00 Polyglycol esters of methylphosphonic acid6%

3824.99 Chemical products, mixtures and preparations; n.e.c. heading 3824

• 3824.99.10.00 Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts4%
• 3824.99.15.00 Ion-exchangers6%
• 3824.99.20.00 Getters for vacuum tubes6%
• 3824.99.25.00 Pyrolignites (for example, of calcium); crude calcium tartrate; crude calcium citrate4%
• 3824.99.30.00 Naphthenic acids, their water-insoluble salts and their esters2%
• Other
• 3824.99.45.00 Anti-scaling and similar compounds6%
• 3824.99.50.00 Preparations for electroplating6%
• 3824.99.55.00 Mixtures of mono-, di- and tri-, fatty acid esters of glycerol (emulsifiers for fats)6%
• Products and preparations for pharmaceutical or surgical uses
• 3824.99.61.00 Intermediate products of the antibiotics manufacturing process obtained from the fermentation of streptomyces tenebrarius, whether or not dried, for use in the manufacture of human medicaments of heading 3004—
• 3824.99.62.00 Intermediate products from the manufacture of monensin saltsFree
• 3824.99.64.00 OtherFree
• 3824.99.65.00 Auxiliary products for foundries (other than those of subheading 3824 10 00)6%
• 3824.99.70.00 Fireproofing, waterproofing and similar protective preparations used in the building industry6%
• Other
• 3824.99.75.00 Lithium niobate wafer, undopedFree
• 3824.99.80.00 Mixture of amines derived from dimerised fatty acids, of an average molecular weight of 520 or more but not exceeding 550Free
• 3824.99.85.00 3-(1-ethyl-1-methylpropyl)isoxazol-5-ylamine, in the form of a solution in tolueneFree
• 3824.99.86.00 Mixtures consisting mainly of dimethyl methylphosphonate, oxirane and diphosphorus pentaoxide6%
• Chemical products or preparations, predominantly composed of organic compounds, not elsewhere specified or included
• In the form of a liquid at 20 °c
• 3824.99.92.01 Naphthalene, chloro derivatives (cas 70776-03-3)6%
• 3824.99.92.02 Preparation containing hexabromocyclododecane (cas 25637-99-4, 3194-55-6)6%
• Mixtures containing halogenated derivatives of ethylene or propylene
• 3824.99.92.07 R514a (containing 74,7 % of 1,1,1,4,4,4-hexafluoro-2-butene (hfc-1336mzz) and 25,3 % of trans–1,2-dichloroethylene)6%
• 3824.99.92.08 Other6%
• Blends containing by weight more than 20% of paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
• 3824.99.92.10 Consigned from canada6.5%
• 3824.99.92.14 Other6.5%
• 3824.99.92.17 Blends containing by weight 20% or less of paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin6.5%
• 3824.99.92.21 Reaction products of 1,3,4-thiadiazolidine-2,5-dithione, formaldehyde and 4-heptylphenol, branched and linear (rp-hp) (with ≥ 0,1% w/w 4-heptylphenol, branched and linear)6%
• 3824.99.92.22 Solution containing: -30 % or more but not more than 40 % by weight of lithium hexafluorophosphate (cas rn 21324-40-3), and -60 % or more but not more than 70 % by weight of ethyl methyl carbonate (cas rn 623-53-0), or dimethyl carbonate (cas rn 616-38-6)6%
• 3824.99.92.23 Butylphosphato complexes of titanium(iv) (cas rn 109037-78-7), dissolved in ethanol and propan-2-ol6%
• 3824.99.92.24 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated6%
• 3824.99.92.25 Mixture containing by weight: -55 % or more but not more than 65 % of (2s,3s,4s,5r,6r)-2-(((2r,3r,5s,6r)-4-(((2r,3s,4s,5r,6r)-3-acetoxy-4,5-bis(benzyloxy)-6-((benzyloxy)methyl)tetrahydro-2h-pyran-2-yl)oxy)-3,5-bis(benzyloxy)-6-(4-methoxy-4-oxobutoxy)tetrahydro-2h-pyran-2-yl)methoxy)-6-((((2s,3s,4s,5r,6r)-3-acetoxy-4,5-bis(benzyloxy)-6-((benzyloxy)methyl)tetrahydro-2h-pyran-2-yl)oxy)methyl)tetrahydro-2h-pyran-3,4,5-triyl tribenzoate (cas rn 1233475-58-5), -35 % or more but not more than 45 % of toluene (cas rn 108-88-3)6%
• 3824.99.92.27 Methyl 5-(dimethylamino)-2-methyl-5-oxopentanoate (cas rn 1174627-68-9) with a purity by weight of 75 % or more6%
• 3824.99.92.28 Preparation containing by weight: -30 % or more, but not more than 60 % of 3a,4,4a,5,8,8a,9,9a-octahydro-4,9:5,8-dimethano-1h-benz[f]indene (cas rn 7158-25-0), -10 % or more, but not more than 50 % of 3a,4,7,7a-tetrahydro-4,7-methanoindene (cas rn 77-73-6), and -whether or not 10 % or more, but not more than 40 % of petroleum hydrocarbon resin (cas rn 68132-00-3)6%
• 3824.99.92.29 Preparation containing by weight: - 85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and - 1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate6%
• 3824.99.92.30 Mixture of c10-c14 tert-alkyl amines (ec number: 701-175-2)6%
• 3824.99.92.33 Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: - on a support of mineral wax, whether or not modified chemically, or - in the form of a solution in an organic solvent6%
• 3824.99.92.34 4-nonylphenol, branched and linear, ethoxylated6%
• 3824.99.92.37 Mixture of acetates of 3-butene-1,2-diol with a content by weight of 65% or more of 3-butene-1,2-diol diacetate (cas rn 18085-02-4)6%
• 3824.99.92.38 Reaction products of phosphoryl trichloride and 2-methyloxirane (cas rn 1244733-77-4)6%
• 3824.99.92.40 Solution of 2-chloro-5-(chloromethyl)-pyridine (cas rn 70258-18-3) in organic diluent6%
• 3824.99.92.41 Formaldehyde, oligomeric reaction products with aniline (cas rn 25214-70-4)6%
• 3824.99.92.44 Mixture, containing by weight: -90 % or more but not more than 95 % of cresol ethoxylate (cas rn 37281-57-5), and -5 % or more but not more than 10 % of xylenol ethoxylate (cas rn 61723-82-8)6%
• 3824.99.92.48 Preparation containing by weight: -80 % or more, but not more than 90 % of 3a,4,7,7a-tetrahydro-4,7-methanoindene (cas rn 77-73-6), and -not more than 10 % of 3a,4,4a,5,8,8a,9,9a-octahydro-1h-4,9:5,8-dimethanocyclopenta[b]naphtalene (cas rn 7158-25-0), and -0,5 % or more, but not more than 3 % of 2,6-di-tert-butyl-p-cresol (cas rn 128-37-0)6%
• 3824.99.92.49 Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (cas rn 169117-72-0)6%
• 3824.99.92.51 Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid6%
• 3824.99.92.52 Electrolyte containing: -5 % or more but not more than 20 % lithium hexafluorophosphate (cas rn 21324-40-3) or lithium tetrafluoroborate (cas rn 14283-07-9), -60 % or more but not more than 90 % of a mixture of ethylene carbonate (cas rn 96-49-1), dimethyl carbonate (cas rn 616-38-6 ) and/or ethyl methyl carbonate (cas rn 623-53-0), -0,5 % or more but not more than 20 % 1,3,2-dioxathiolane 2,2-dioxide (cas rn 1072-53-3) for use in the manufacture of motor vehicle batteries6%
• 3824.99.92.54 Poly(tetramethylene glycol) bis[(9-oxo-9h-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (cas rn 813452-37-8)6%
• 3824.99.92.55 Additives for paints and coatings, containing: - a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (cas rn 84605-27-6), and - 30 % or more but not more than 35 % by weight of isobutyl alcohol6%
• 3824.99.92.58 Mixture containing by weight: -56 % or more but not more than 85 % of divinylbenzene isomers (cas rn 1321-74-0) -15 % or more but not more than 44 % of ethylvinylbenzene isomers (cas rn 28106-30-1)6%
• 3824.99.92.61 3',4',5'-trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4',5'-trifluorobiphenyl-2-amine6%
• 3824.99.92.62 Solution of 9-borabicyclo[3.3.1]nonane (cas rn 280-64-8) in tetrahydrofurane (cas rn 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane6%
• 3824.99.92.63 Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate6%
• Ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union), denatured or undenatured, excluding products with a water content of more than 0,3 % (m/m) measured according to the standard en 15376, but including ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union) contained in blends with gasoline with an ethyl alcohol content of more than 10 % (v/v)
• 3824.99.92.66 For use as fuel6%
• 3824.99.92.67 For other uses6%
• 3824.99.92.68 Preparation containing by weight: - 20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) tribenzene (cas rn 1404190-37-9), dissolved in: - 10 % (± 5 %) 2-sec-butylphenol (cas rn 89-72-5) - 64 %( ±7 %) solvent naphtha (petroleum), heavy aromatic (cas rn 64742-94-5) and - 6 % (± 1.0 %) naphthalene (cas rn 91-20-3)6%
• 3824.99.92.69 Preparation containing by weight: - 80 % or more but not more than 92 % of bisphenol-a bis(diphenyl phosphate) (cas rn 5945-33-5) - 7 % or more but not more than 20 % oligomers of bisphenol-a bis(diphenyl phosphate) and - not more than 1 % triphenyl phosphate (cas rn 115-86-6)6%
• 3824.99.92.70 Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine6%
• 3824.99.92.73 Tri-c8-10-alkyl amines (cas rn 68814-95-9) with a purity by weight of 95 % or more6%
• 3824.99.92.75 Mixture, containing by weight: -75% or more of tetrabutyltin (cas rn 1461-25-2), -not more than 20 % of tributyltin chloride (cas rn 1461-22-9), -not more than 4 % of dibutyltin dichloride (cas rn 683-18-1), for use in the production of butyltin compounds used in glass manufacture and tributyltin chloride used as a catalyst in the pharmaceutical industry6%
• 3824.99.92.79 Mixture, containing by weight: -tributyltin chloride (cas rn 1461-22-9) with a purity by weight of 80 % or more, -not more than 5 % tetrabutyltin (cas rn 1461-25-2), -not more than 6 % dibutyltin dichloride (cas rn 683-18-1), -not more than 11 % o-xylene (cas rn 95-47-6), for use in the production of tributyltin chloride used as a catalyst in the pharmaceutical industry6%
• 3824.99.92.81 Reaction mass of 3- [(diphenoxyphosphoryl)oxy]phenyl triphenyl 1,3-phenylene bis(phosphate) and tetraphenyl 1,3-phenylene bis(phosphate)6%
• 3824.99.92.82 T-butylchloride dimethylsilane (cas rn 18162-48-6) solution in toluene6%
• 3824.99.92.83 1-(cedr-8-en-9-yl)ethanone (cas rn 32388-55-9) with a purity by weight of 70 % or more, but not more than 90 %6%
• 3824.99.92.84 Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and: - either an aluminium-alkyl compound, - or an organic complex of tungsten - or an organic complex of molybdenum6%
• 3824.99.92.86 Tall oil n,n-dimethyl fatty amides (cas rn 68308-74-7) with a purity by weight of 99 % or more6%
• 3824.99.92.88 2,4,7,9-tetramethyldec-5-yne-4,7-diol, hydroxyethylated (cas rn 9014-85-1)6%
• 3824.99.92.89 Mixture of tertiary alkyldimethyl amines containing by weight: - 60 % or more but not more than 80 % of dodecyldimethylamine (cas rn 112-18-5), and - 20 % or more but not more than 30 % of dimethyl(tetradecyl)amine (cas rn 112-75-4)6%
• 3824.99.92.90 1,2-benzenedicarboxylic acid, di-c6-10-alkyl esters (cas rn 68515-51-5)6%
• 3824.99.92.91 1,2-benzenedicarboxylic acid, mixed decyl and hexyl and octyl diesters with ≥ 0,3% of dihexyl phthalate (cas rn 68648-93-1)6%
• 3824.99.92.92 Solution consisting of: - 50 (± 2) % by weight sodium mentholate (cas rn 19321-38-1), and - 50 (± 2) % by weight light aliphatic solvent naphtha (petroleum) (cas rn 64742-89-8)6%
• 3824.99.92.94 ({[2-(trifluoromethyl)phenyl]carbonyl}amino)methyl acetate (cas rn 895525-72-1) with a content of at least 45 % by weight dissolved in n,n-dimethylacetamide (cas rn 127-19-5)6%
• 3824.99.92.95 Solution of methyl cis-1-{[(2,5-dimethylphenyl)acetyl]amino}-4-methoxycyclohexanecarboxylate (cas rn 203313-47-7) in n,n-dimethylacetamide (cas rn 127-19-5), containing by weight 25 % or more but not more than 45 % of the carboxylate6%
• 3824.99.92.96 Products containing more than 35 % by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ech’) and an aliphatic or aromatic alcoholic component (such as bpa), having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups6%
• 3824.99.92.97 Mixture containing bis[3-(triethoxysilyl)propyl]polysulfides (cas rn 211519-85-6) with a purity by weight of 84 % or more6%
• 3824.99.92.98 Monosodium glutamate in mixture or in solution, containing by dry weight 50 % or more of monosodium glutamate6%
• 3824.99.92.99 Other6%
• Other
• 3824.99.93.10 Products containing more than 35 % by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ech’) and an aliphatic or aromatic alcoholic component (such as bpa), having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups6%
• 3824.99.93.20 Preparation containing hexabromocyclododecane (cas 25637-99-4 or 134237-52-8)6%
• 3824.99.93.30 Powder mixture containing by weight: - 85 % or more of zinc diacrylate (cas rn 14643-87-9), - not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (cas rn 88-27-7), and - not more than 10 % of zinc stearate (cas rn 557-05-1)6%
• 3824.99.93.31 Reaction mass of dihexadecyl hydrogen phosphate (cas rn 2197-63-9) and hexadecyl dihydrogen phosphate (cas rn 3539-43-3)6%
• 3824.99.93.33 Preparation containing by weight -60 % or more but not more than 70 % of calcium rel-(1r,2s)-cyclohexane-1,2-dicarboxylate (cas rn 491589-22-1), -30 % or more but not more than 40 % of zinc stearate (cas rn 557-05-1), -1 % or more but not more than 5 % of ci pigment blue 29 (cas rn 57455-37-5) and -1 % or more but not more than 5 % of ci pigment violet 15 (cas rn 12769-96-9)6%
• 3824.99.93.35 Paraffin with a level of chlorination of 70 % or more (cas rn 63449-39-8)6%
• 3824.99.93.36 Preparation containing by weight 60 % or more but not more than 70 % of calcium rel-(1r,2s)-cyclohexane-1,2-dicarboxylate (cas rn 491589-22-1) and 30 % or more but not more than 40 % of zinc stearate (cas rn 557-05-1)6%
• 3824.99.93.40 Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: - on a support of mineral wax, whether or not modified chemically, or - in the form of a solution in an organic solvent6%
• 3824.99.93.42 Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea6%
• 3824.99.93.45 Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (cas rn 4681-22-5) containing by weight: - not more than 20 % of disodium sulphate, and - not more than 10 % of sodium chloride6%
• 3824.99.93.48 Nonhalogenated flame retardant containing by weight: -50 % or more, but not more than 65 % of piperazine pyrophosphate (cas rn 66034-17-1), -35 % or more, but not more than 45 % of a phosphoric acid derivative and -not more than 6 % of zinc oxide (cas rn 1314-13-2)6%
• 3824.99.93.53 Zinc dimethacrylate (cas rn 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (cas rn 88-27-7), in the form of powder6%
• 3824.99.93.61 Disodium 7,7'-(carbonyldiimino)bis(4-hydroxynaphthalene-2-sulphonate) (cas rn 20324-87-2) with a purity by weight of 80 % or more6%
• 3824.99.93.63 Mixture of phytosterols, not in the form of powder, containing by weight: - 75 % or more of sterols, - not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters6%
• 3824.99.93.65 Reaction mass of 1,1'-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)benzene] (cas rn 97416-84-7) and 1,3-dibromo-2-(2,3-dibromo-2-methylpropoxy)-5-{2-[3,5-dibromo-4-(2,3,3-tribromo-2-methylpropoxy)phenyl]propan-2-yl}benzene6%
• 3824.99.93.67 Mixture of phytosterols, in the form of powder, containing by weight: - 75% or more of sterols, - not more than 25% of stanols for use in the manufacture of stanols/sterols or stanol/sterol esters6%
• 3824.99.93.74 1,3-propanediamine, n1,n1'-1,2-ethanediylbis-, reaction products with cyclohexane and peroxidized n-butyl-2,2,6,6-tetramethyl-4-piperidinamine-2,4,6-trichloro-1,3,5-triazine reaction products (cas rn 191680-81-6)6%
• 3824.99.93.88 Mixture of phytosterols containing by weight: - 60 % or more, but not more than 80 % of sitosterols, - not more than 15 % of campesterols, - not more than 5 % of stigmasterols and - not more than 15 % of betasitostanols6%
• 3824.99.93.89 Monosodium glutamate in mixture or in solution, containing by dry weight 50 % or more of monosodium glutamate6%
• 3824.99.93.90 Other6%
• Other
• 3824.99.96.30 Rare-earth concentrate containing by weight: - 20 % or more but not more than 30 % of cerium oxide (cas rn 1306-38-3), - 2 % or more but not more than 10 % of lanthanum oxide (cas rn 1312-81-8), - 10 % or more but not more than 15 % of yttrium oxide (cas rn 1314-36-9), and - not more than 65 % of zirconium oxide (cas rn 1314-23-4) including natural occurring hafnium oxide6%
• 3824.99.96.35 Calcined bauxite (refractory grade)6%
• 3824.99.96.37 Structured silica alumina phosphate6%
• 3824.99.96.38 Low outgassing thermally conductive silicone paste: -with thermal conductivity when cured of 3,45 w/(m⋅k) or more but not more than 3,55 w/(m⋅k), -with continuous use temperature minimum range from -60 ℃ to 200 ℃, -with heat capacity when cured of 0,75 j/g·k or more but not more than 0,85 j/g·k, -with volume resistivity when cured of 1010 ω·m or more, -packaged in containers of 30 kg or more6%
• 3824.99.96.40 Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: - on a support of mineral wax, whether or not modified chemically, or - in the form of a solution in an organic solvent6%
• 3824.99.96.43 2-(ethylthio)ethanethiol functionalized silicagel with a purity by weight of 98 % or more6%
• 3824.99.96.45 Lithium nickel cobalt aluminium oxide powder (cas rn 177997-13-6) with: -a particle size of less than 10 μm, -a purity by weight of more than 98 %6%
• 3824.99.96.46 Manganese zinc ferrite granulate, containing by weight: - 52 % or more but not more than 76 % of iron(iii)oxide, - 13 % or more but not more than 42 % of manganese oxide, and - 2 % or more but not more than 22 % of zinc oxide6%
• 3824.99.96.47 Mixed metals oxides, in the form of powder, containing by weight: - either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium, - or 30 % or more of lead and 5 % or more of niobium, for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors6%
• 3824.99.96.48 Zirconium oxide (zro2), calcium oxide stabilised (cas rn 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %6%
• 3824.99.96.50 Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators6%
• 3824.99.96.53 Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight6%
• 3824.99.96.55 Carrier in powder form, consisting of: - ferrite (iron oxide) (cas rn 1309-37-1) - manganese oxide (cas rn 1344-43-0) - magnesium oxide (cas rn 1309-48-4) - styrene acrylate copolymer to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers6%
• 3824.99.96.57 Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (hplc) and sample preparation cartridges6%
• 3824.99.96.60 Fused magnesia containing by weight 15 % or more of dichromium trioxide6%
• 3824.99.96.62 Viscous preparation essentially containing: -by weight more than 5 % but not more than 15 % of poly(vinyl alcohol) (cas rn 9002-89-5), -by weight more than 10 % but not more than 20 % of 1-methoxy-2-propanol (cas rn 107-98-2),​ -water, for use as a protective coating for wafers during the slicing process in the manufacture of semiconductors6%
• 3824.99.96.65 Aluminium sodium silicate, in the form of spheres of a diameter of: - either 1,6mm or more but not more than 3,4mm, - or 4mm or more but not more than 6mm6%
• 3824.99.96.66 Vulcanizing agent containing by weight: -78 % or more but not more than 82 % of insoluble sulphur (cas rn 9035-99-8), -18 % or more but not more than 22 % of naphthenic oil (cas rn 64742-52-5), and -not more than 0,2 % of methyl styrene (cas rn 98-83-9)6%
• 3824.99.96.68 Lithium nickel dioxide (cas rn 12325-84-7) containing by weight: -less than 5 % of lithium hydroxide (cas rn 1310-65-2), -less than 5 % of lithium carbonate (cas rn 554-13-2), and -less than 15 % of nickel oxide (cas rn 11099-02-8)6%
• 3824.99.96.73 Reaction product, containing by weight: - 1 % or more but not more than 40 % of molybdenum oxide, - 10 % or more but not more than 50 % of nickel oxide, - 30 % or more but not more than 70 % of tungsten oxide6%
• 3824.99.96.74 Mixture with a non-stoichiometric composition: - with a crystalline structure, - with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm6%
• 3824.99.96.78 Zirconium oxide stabilized with yttrium oxide (cas rn 64417-98-7) containing by weight 90 % or more of zirconium oxide6%
• 3824.99.96.80 Mixture consisting of: - 64 % or more, but not more than 74 % by weight of amorphous silica (cas rn 7631-86-9) - 25 % or more, but not more than 35 % by weight of butanone (cas rn 78-93-3) and - not more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (cas rn 2530-83-8)6%
• 3824.99.96.83 Cubic boron nitride (cas rn 10043-11-5) coated with nickel and/or nickelphosphide (cas rn 12035-64-2)6%
• 3824.99.96.87 Platinum oxide (cas rn 12035-82-4) fixed on a porous support of aluminium oxide (cas rn 1344-28-1), containing by weight: - 0,1 % or more but not more than 1 % of platinum, and - 0,5 % or more but not more than 5 % of ethylaluminium dichloride (cas rn 563-43-9)6%
• 3824.99.96.89 Monosodium glutamate in mixture or in solution, containing by dry weight 50 % or more of monosodium glutamate6%
• 3824.99.96.91 Mixture, in pellet form, containing by weight: - 49 % or more but not more than 50 % of bis[3-(triethoxysilyl)propyl] polysulphides (cas rn 211519-85-6), and - 50 % or more but not more than 51 % of carbon black (cas rn 1333-86-4), of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the astm d1511 method)6%
• 3824.99.96.99 Other6%

3825 Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other residual products.

3825.10 Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste

• 3825.10.00.00 Municipal wasteFree

3825.20 Residual products of the chemical or allied industries, not elsewhere specified or included; sewage sludge

• 3825.20.00.00 Sewage sludgeFree

3825.30 Residual products of the chemical or allied industries, not elsewhere specified or included; clinical waste

• 3825.30.00.00 Clinical wasteFree

3825.41 Residual products of the chemical or allied industries, not elsewhere specified or included; halogenated waste organic solvents

• 3825.41.00.00 HalogenatedFree

3825.49 Residual products of the chemical or allied industries, not elsewhere specified or included; waste organic solvents, other than halogenated

• 3825.49.00.00 OtherFree

3825.50 Residual products of chemical or allied industries, not elsewhere specified or included; wastes of metal pickling liquors, hydraulic fluids, brake fluids and anti-freeze fluids

• 3825.50.00.00 Wastes of metal-pickling liquors, hydraulic fluids, brake fluids and anti-freeze fluidsFree

3825.61 Residual products of the chemical or allied industries, not elsewhere specified or included; (other than sewage sludge, municipal waste or waste covered in 27.10); other wastes n.e.c. in 3825; those mainly containing organic constituents

• 3825.61.00.00 Mainly containing organic constituentsFree

3825.69 Residual products of the chemical or allied industries, not elsewhere specified or included; (other than sewage sludge, municipal waste or waste covered by 27.10); other wastes n.e.c. in 3825; except those mainly containing organic constituents

• 3825.69.00.00 OtherFree

3825.90 Residual products of the chemical or allied industries, not elsewhere specified or included; n.e.c. in 3825 or 27.10

• 3825.90.10.00 Alkaline iron oxide for the purification of gasFree
• 3825.90.90.00 OtherFree

3826 Biodiesel and mixtures thereof; not containing or containing less than 70% by weight of petroleum oils or oils obtained from bituminous minerals

3826.00 Biodiesel and mixtures thereof; not containing or containing less than 70% by weight of petroleum oils or oils obtained from bituminous minerals

• Fatty-acid mono-alkyl esters, containing by weight 96,5 % or more of esters (famae)
• Mixture of fatty acid methyl esters containing by weight at least: - 65 % or more but not more than 75 % of c12 fame, - 21 % or more but not more than 28 % of c14 fame, - 4 % or more but not more than 8 % of c16 fame, for use in the manufacture of detergents and home and personal care products
• 3826.00.10.20 Consigned from canada6.5%
• 3826.00.10.29 Other6.5%
• Mixture of fatty acid methyl esters containing by weight at least: - 50 % or more but not more than 58 % of c8-fame - 35 % or more but not more than 50 % of c10-fame for the manufacturing of high purity c8 or c10 fatty acid or fatty acid mixtures thereof or of high purity methylester of c8 or c10 fatty acid
• 3826.00.10.50 Consigned from canada6.5%
• 3826.00.10.59 Other6.5%
• Other
• 3826.00.10.89 Consigned from canada6.5%
• 3826.00.10.99 Other6.5%
• Other
• Blends containing by weight more than 20% of fatty-acid mono-alkyl esters or of a mixture of fatty-acid mono-alkyl esters and paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
• 3826.00.90.11 Consigned from canada6.5%
• 3826.00.90.19 Other6.5%
• 3826.00.90.33 Blends containing by weight 20% or less of fatty-acid mono-alkyl esters or of a mixture of fatty-acid mono-alkyl esters and paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin6.5%
• 3826.00.90.90 Other6%

3827 Mixtures containing halogenated derivatives of methane, ethane or propane, not elsewhere specified or included

3827.11 Mixtures containing halogenated derivatives of methane, ethane or propane, not elsewhere specified or included; containing chlorofluorocarbons (CFCs), whether or not containing hydrochlorofluorocarbons (HCFCs), perfluorocarbons (PFCs) or hydrofluorocarbon

• 3827.11.00.00 Containing chlorofluorocarbons (cfcs), whether or not containing hydrochlorofluorocarbons (hcfcs), perfluorocarbons (pfcs) or hydrofluorocarbons (hfcs)6%

3827.12 Mixtures containing halogenated derivatives of methane, ethane or propane, not elsewhere specified or included; containing hydrobromofluorocarbons (HBFCs)

• 3827.12.00.00 Containing hydrobromofluorocarbons (hbfcs)6%

3827.13 Mixtures containing halogenated derivatives of methane, ethane or propane, not elsewhere specified or included; containing carbon tetrachloride

• 3827.13.00.00 Containing carbon tetrachloride6%

3827.14 Mixtures containing halogenated derivatives of methane, ethane or propane, not elsewhere specified or included; containing 1,1,1-trichloroethane (methyl chloroform)

• 3827.14.00.00 Containing 1,1,1-trichloroethane (methyl chloroform)6%

3827.20 Mixtures containing halogenated derivatives of methane, ethane or propane, not elsewhere specified or included; containing bromochlorodifluoromethane (Halon-1211), bromotrifluoromethane (Halon-1301) or dibromotetrafluoroethanes (Halon-2402)

• 3827.20.00.00 Containing bromochlorodifluoromethane (halon-1211), bromotrifluoromethane (halon-1301) or dibromotetrafluoroethanes (halon-2402)6%

3827.31 Mixtures containing halogenated derivatives of methane, ethane or propane; containing hydrochlorofluorocarbons (HCFCs), perfluorocarbons (PFCs) or hydrofluorocarbons (HFCs) or not, but not containing chlorofluorocarbons (CFCs); containing substances of su

• 3827.31.00.00 Containing substances of subheadings 2903 41 to 2903 486%

3827.32 Mixtures containing halogenated methane, ethane, propane; containing hydrochlorofluorocarbons (HCFCs), perfluorocarbons (PFCs) or hydrofluorocarbons (HFCs) or not, not chlorofluorocarbons (CFCs); containing substances of subheadings 2903.71 to 2903.75

• 3827.32.00.00 Other, containing substances of subheadings 2903 71 to 2903 756%

3827.39 Mixtures containing halogenated methane, ethane, or propane; containing hydrochlorofluorocarbons (HCFCs), perfluorocarbons (PFCs) or hydrofluorocarbons (HFCs) or not, but not chlorofluorocarbons (CFCs); n.e.c. in subheading 3827.3

• 3827.39.00.00 Other6%

3827.40 Mixtures containing halogenated derivatives of methane, ethane or propane; containing hydrochlorofluorocarbons (HCFCs), perfluorocarbons (PFCs) or hydrofluorocarbons (HFCs) or not, but not containing chlorofluorocarbons (CFCs); containing bromomethane (me

• 3827.40.00.00 Containing methyl bromide (bromomethane) or bromochloromethane6%

3827.51 Mixtures containing halogenated derivatives of methane, ethane or propane; containing trifluoromethan (HFC-23) or perfluorocarbons (PFCs) but not containing chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs); containing trifluoromethane (HFC-2

• 3827.51.00.10 R508a (containing 61% of hexafluoroethane (perfluoroethane) (pfc-116) and 39% of trifluoromethane (fluoroform) (hfc-23))6%
• 3827.51.00.20 R508b (containing 54 % of hexafluoroethane (perfluoroethane) (pfc-116) and 46 % of trifluoromethane (fluoroform) (hfc-23))6%
• 3827.51.00.90 Other6%

3827.59 Mixtures containing halogenated derivatives of methane, ethane or propane; containing trifluoromethan (HFC-23) or perfluorocarbons (PFCs) not containing chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs); other mixtures n.e.c. in subheading 38

• 3827.59.00.00 Other6%

3827.61 Mixtures containing halogenated derivatives of methane, ethane or propane; containing other hydrofluorocarbons (HFCs) but not containing chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs); containing 15% or more by mass of 1,1,1-trifluoroethan

• 3827.61.00.10 R507a (containing 50 % pentafluoroethane (hfc-125) and 50 % of 1,1,1-trifluoroethane (hfc-143a))6%
• 3827.61.00.20 R404a (containing 52 % of 1,1,1-trifluoroethane (hfc-143a), 44 % of pentafluoroethane (hfc-125) and 4 % of 1,1,1,2-tetrafluoroethane (hfc-134a))6%
• 3827.61.00.90 Other6%

3827.62 Mixtures containing halogenated derivatives of methane, ethane or propane; containing other hydrofluorocarbons (HFCs) but not containing chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs); other mixtures, not included in the subheading above,

• 3827.62.00.10 Containing only 1,1,1-trifluoroethane and pentafluoroethane6%
• 3827.62.00.20 Containing only 1,1,1-trifluoroethane, pentafluoroethane and 1,1,1,2-tetrafluoroethane6%
• 3827.62.00.30 Containing only difluoromethane and pentafluoroethane6%
• 3827.62.00.40 Containing only difluoromethane and pentafluoroethane and 1,1,1,2-tetrafluoroethane6%
• Other
• 3827.62.00.50 R422d (containing 65,1 % of pentafluoroethane (hfc-125), 31,5 % of 1,1,1,2-tetrafluoroethane (hfc-134a) and 3,4 % of isobutane)6%
• 3827.62.00.60 R419a (containing 77 % of pentafluoroethane (hfc-125), 19 % of 1,1,1,2-tetrafluoroethane (hfc-134a), and 4 % of dimethyl ether (r-e170))6%
• 3827.62.00.90 Other6%

3827.63 Mixtures containing halogenated derivatives of methane, ethane or propane; containing other hydrofluorocarbons (HFCs) but not containing chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs); other mixtures not included in the subheadings above,

• 3827.63.00.10 Containing only 1,1,1-trifluoroethane and pentafluoroethane6%
• 3827.63.00.15 Containing only 1,1,1-trifluoroethane, pentafluoroethane and 1,1,1,2-tetrafluoroethane6%
• Containing only difluoromethane and pentafluoroethane
• 3827.63.00.20 R410a (containing 50% of pentafluoroethane (hfc-125) and 50% of difluoromethane (hfc-32))6%
• 3827.63.00.29 Other6%
• Containing only difluoromethane, pentafluoroethane and 1,1,1,2-tetrafluoroethane
• 3827.63.00.30 R407a (containing 40% of pentafluoroethane (hfc-125), 40% of 1,1,1,2-tetrafluoroethane (hfc-134a) and 20% of difluoromethane (hfc-32))6%
• 3827.63.00.39 Other6%
• Containing unsaturated hydrofluorocarbons
• 3827.63.00.40 R452a (containing 59% of pentafluoroethane (hfc-125), 30% of 2,3,3,3-tetrafluoropropene (hfc-1234yf) and 11% of difluoromethane (hfc-32))6%
• 3827.63.00.49 Other6%
• Other
• 3827.63.00.90 R417a (containing 50% of 1,1,1,2-tetrafluoroethane (hfc-134a), 46.6% of pentafluoroethane (hfc-125) and 3.4% of isobutane)6%
• 3827.63.00.99 Other6%

3827.64 Mixtures containing halogenated derivatives of methane, ethane or propane; containing other hydrofluorocarbons (HFCs) but not containing chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs); other mixtures, not included in the subheadings above,

• 3827.64.00.10 Containing only 1,1,1-trifluoroethane, pentafluoroethane and 1,1,1,2-tetrafluoroethane6%
• Containing only difluoromethane, pentafluoroethane and 1,1,1,2-tetrafluoroethane
• 3827.64.00.20 R407c (containing 52% of 1,1,1,2-tetrafluoroethane (hfc-134a), 25% of pentafluoroethane (hfc-125) and 23% of difluoromethane (hfc-32))6%
• 3827.64.00.21 R407f (containing 40% of 1,1,1,2-tetrafluoroethane (hfc-134a), 30% of difluoromethane (hfc-32) and 30% of pentafluoroethane (hfc-125))6%
• 3827.64.00.22 R407h (containing 52.5% of 1,1,1,2-tetrafluoroethane (hfc-134a), 32.5% of difluoromethane (hfc-32) and 15% of pentafluoroethane (hfc-125))6%
• 3827.64.00.29 Other6%
• 3827.64.00.90 Other6%

3827.65 Mixtures containing halogenated derivatives of methane, ethane or propane; containing other hydrofluorocarbons (HFCs) but not containing chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs); other mixtures, not included in the subheadings above,

• 3827.65.00.10 Containing only difluoromethane, pentafluoroethane and 1,1,1,2-tetrafluoroethane6%
• Containing unsaturated hydrofluorocarbons
• 3827.65.00.20 R448a (containing 26% of difluoromethane (hfc-32), 26% of pentafluoroethane (hfc-125), 21% of 1,1,1,2-tetrafluoroethane (hfc-134a), 20% of 2,3,3,3-tetrafluoropropene (hfc-1234yf) and 7% of 1,3,3,3-tetrafluoropropene (hfc-1234ze)6%
• 3827.65.00.21 R449a (containing 25.7% of 1,1,1,2-tetrafluoroethane (hfc-134a), 25.3% of 2,3,3,3-tetrafluoropropene (hfc-1234yf), 24.7% of pentafluoroethane (hfc-125) and 24.3% of difluoromethane (hfc-32))6%
• 3827.65.00.29 Other6%
• 3827.65.00.90 Other6%

3827.68 Mixtures containing halogenated derivatives of methane, ethane or propane; containing other hydrofluorocarbons (HFCs) but not containing chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs); other mixtures, not included in the subheadings above,

• 3827.68.00.10 R452b (containing 67% of difluoromethane (hfc-32), 26% of 2,3,3,3-tetrafluoropropene (hfc-1234yf) and 7% of pentafluoroethane (hfc-125)6%
• 3827.68.00.20 R455a (containing 75.5% of 2,3,3,3-tetrafluoropropene (hfc-1234yf), 21.5% of difluoromethane (hfc-32) and 3% of carbon dioxide)6%
• 3827.68.00.30 Containing only 1,1,1,3,3-pentafluorobutane (hfc-365mfc) and 1,1,1,2,3,3,3-heptafluoropropane (hfc-227ea)6%
• 3827.68.00.40 Containing only 1,1,1,3,3-pentafluorobutane (hfc-365mfc) and 1,1,1,3,3-pentafluoropropane (hfc-245fa)6%
• 3827.68.00.50 R450a (containing 58 % of 1,3,3,3-tetrafluoropropene (hfc-1234ze) and 42 % of 1,1,1,2-tetrafluoroethane (hfc-134a))6%
• 3827.68.00.60 R513a (containing 56 % of 2,3,3,3-tetrafluoropropene (hfc-1234yf) and 44 % of 1,1,1,2-tetrafluoroethane (hfc-134a))6%
• 3827.68.00.90 Other6%

3827.69 Mixtures containing halogenated derivatives of methane, ethane or propane; containing other hydrofluorocarbons (HFCs) but not containing chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs); n.e.c. in items no. 3827.5 and 3827.6, not containing

• 3827.69.00.00 Other6%

3827.90 Mixtures containing halogenated derivatives of methane, ethane or propane; n.e.c. in subheading no 3827

• 3827.90.00.10 Mixtures containing by weight: - 60 % or more but not more than 90 % of 2-chloropropene (cas rn 557-98-2), - 8 % or more but not more than 14 % of (z)-1-chloropropene (cas rn 16136-84-8), - 5 % or more but not more than 23 % of 2-chloropropane (cas rn 75-29-6), - not more than 6 % of 3-chloropropene (cas rn 107-05-1), and - not more than 1 % of ethyl chloride (cas rn 75-00-3)6%
• 3827.90.00.90 Other6%