4412 Plywood, veneered panels and similar laminated wood
Harmonized Tariff Schedule · MFN rates · Chapter 44, Wood and articles of wood; wood charcoal
CodeDescriptionMFN rate
4412.10 Plywood, veneered panels and similar laminated wood; of bamboo
- 4412.10.05.00 Plywood8%
- 4412.10.90.00 OtherFree
4412.31 Plywood; consisting only of sheets of wood (not bamboo), each ply 6mm or thinner, with at least one outer ply of tropical wood
- Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply
- With a face ply of birch (Betula spp.)
- 4412.31.06.20 Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in lengthFree
- Other
- 4412.31.06.40 Not surface coveredFree
- 4412.31.06.60 OtherFree
- With a face ply of Spanish cedar (Cedrela spp.) or walnut (Juglans spp)
- 4412.31.26.10 With a face ply of Spanish cedar (Cedrela spp.)8%
- 4412.31.26.20 With a face ply of walnut (Juglans spp.)8%
- Other
- With at least one outer ply of the following tropical woods: Dark Red Meranti, Light Red Meranti, White Lauan, Sipo, Limba, Okoumé, Obeche, Acajou d'Afrique, Sapelli, Virola, Mahogany, Palissandre de Para, Palissandre de Rio or Palissandre de Rose
- 4412.31.42.00 With a face ply of mahogany (Swietenia spp. or Khaya spp.)8%
- 4412.31.45.00 Panels not exceeding 3.6 mm in thickness and exceeding 1.2 m in width and 2.2 m in length8%
- Other
- 4412.31.48.50 Panels not exceeding 3.6 mm in thickness and not exceeding 1.2 m in width and 2.2 m in length8%
- Other
- Not surface covered
- 4412.31.48.60 Dark Red Meranti, Light Red Meranti or White Lauan (Luan) (Shorea spp.)8%
- 4412.31.48.63 Limba (Terminalia spp.), also known as Terminalia and Nargusta8%
- 4412.31.48.66 Virola (Virola spp.)8%
- 4412.31.48.69 Other8%
- Other
- 4412.31.48.75 Wood flooring8%
- 4412.31.48.80 Other8%
- Other
- 4412.31.52.25 Wood flooring8%
- Other
- 4412.31.52.35 With a face ply of sen (Kalopanax spp.)8%
- Other
- 4412.31.52.55 Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length8%
- Other
- Not surface covered
- 4412.31.52.60 Albizia (Albizia spp.), also known as Falcata, Batai and Suar wood8%
- 4412.31.52.62 Bintangor (Calophyllum spp.)8%
- 4412.31.52.64 Mersawa (Anisoptera spp.)8%
- 4412.31.52.66 Parica (Schizolobium spp.), also known as Pinho Cuiabano, Firetree and Guapuruvu8%
- 4412.31.52.68 Pencil cedar, Nyatoh (Palaquium spp.)8%
- 4412.31.52.70 Other8%
- 4412.31.52.75 Other8%
- Other
- 4412.31.61.00 With at least one outer ply of the following tropical woods: Dark Red Meranti, Light Red Meranti, White Lauan, Sipo, Limba, Okoumé, Obeche, Acajou d'Afrique, Sapelli, Virola, Mahogany, Palissandre de Para, Palissandre de Rio or Palissandre de Rose8%
- 4412.31.92.00 Other8%
4412.33 Plywood; with sheets of wood only; not bamboo; each ply 6mm or less, with at least one outer ply of alder, ash, beech, birch, cherry, chestnut, elm, eucalyptus, hickory, horse chestnut, lime, maple, oak, plane, poplar, aspen, robinia, tulipwood or walnut
- Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply
- With a face ply of birch (Betula spp.)
- 4412.33.06.20 Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in lengthFree
- Other
- 4412.33.06.40 Not surface coveredFree
- Other
- 4412.33.06.65 Wood flooringFree
- 4412.33.06.70 OtherFree
- With a face ply of walnut (Juglans spp.)
- 4412.33.26.25 Wood flooring5.1%
- 4412.33.26.30 Other5.1%
- Other
- 4412.33.32.25 Wood flooring8%
- Other
- 4412.33.32.35 With a face ply of sen (Kalopanax spp.)8%
- 4412.33.32.55 With a face ply of mahogany (Swietenia spp. or Khaya spp.)8%
- Other
- 4412.33.32.65 Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length8%
- Other
- 4412.33.32.75 Not surface covered8%
- 4412.33.32.85 Other8%
- 4412.33.57.00 Other8%
4412.34 Plywood; consisting only of sheets of wood (not bamboo), each ply 6mm or thinner, with at least one outer ply of non-coniferous wood not listed in subheading 4412.33
- Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply
- 4412.34.26.00 With a face ply of Spanish cedar (Cedrela spp.)5.1%
- Other
- 4412.34.32.25 Wood flooring8%
- Other
- 4412.34.32.35 With a face ply of sen (Kalopanax spp.)8%
- 4412.34.32.55 With a face ply of mahogany (Swietenia spp. or Khaya spp.)8%
- Other
- 4412.34.32.65 Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length8%
- Other
- 4412.34.32.75 Not surface covered8%
- 4412.34.32.85 Other8%
- 4412.34.57.00 Other8%
4412.39 Plywood; consisting only of sheets of wood (not bamboo), each ply 6mm or thinner, with both outer plies of coniferous wood
- Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply
- 4412.39.10.00 With a face ply of Parana pine (Araucaria angustifolia)Free
- 4412.39.30.00 With a face ply of European red pine (Pinus silvestris)3.4%
- Other
- With at least one outer ply of Douglas fir (Pseudotsuga menziesii)
- 4412.39.40.11 Rough, or touch sanded for sizing purposes, but not further processed8%
- 4412.39.40.12 Fully sanded on at least one face, but not further processed8%
- 4412.39.40.19 Other8%
- With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine)(Pinus taeda), slash pine (Pinus elliotti), pitch pine (Pinus rigida) or Virginia pine (Pinus virginiana)
- 4412.39.40.31 Rough, or touch sanded for sizing purposes, but not further processed8%
- 4412.39.40.32 Fully sanded on at least one face, but not further processed8%
- 4412.39.40.39 Other8%
- With at least one outer ply of Agathis spp
- 4412.39.40.51 Rough, or touch sanded for sizing purposes, but not further processed8%
- 4412.39.40.52 Fully sanded on at least one face, but not further processed8%
- 4412.39.40.59 Other8%
- Other
- 4412.39.40.61 Rough, or touch sanded for sizing purposes, but not further processed8%
- 4412.39.40.62 Fully sanded on at least one face, but not further processed8%
- 4412.39.40.69 Other8%
- Other
- 4412.39.50.10 With at least one outer ply of Douglas fir (Pseudotsuga menziesii)5.1%
- 4412.39.50.30 With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine) (Pinus taeda), slash pine (Pinus elliotti), pitch pine (Pinus rigida) or Virginia pine (Pinus virginiana)5.1%
- 4412.39.50.50 Other5.1%
4412.41 Plywood, veneered panels and similar laminated wood; laminated veneered lumber (LVL); with at least one outer ply of tropical wood
- 4412.41.00.00 With at least one outer ply of tropical woodFree
4412.42 Laminated veneered lumber (LVL); with at least one outer ply of non-coniferous wood
- 4412.42.00.00 Other, with at least one outer ply of nonconiferous woodFree
4412.49 Laminated veneered lumber (LVL); with both outer plies of coniferous wood
- 4412.49.00.00 Other, with both outer plies of coniferous woodFree
4412.51 Blockboard, laminboard and battenboard; with at least one outer layer of tropical wood
- Plywood
- Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply
- With a face ply of birch (Betula spp.)
- 4412.51.10.30 Not surface coveredFree
- 4412.51.10.50 OtherFree
- Other
- 4412.51.31.05 Wood flooring8%
- Other
- 4412.51.31.11 With a face ply of Spanish cedar (Cedrela spp.)8%
- 4412.51.31.21 With a face ply of walnut (Juglans spp.)8%
- 4412.51.31.41 With a face ply of mahogany (Swietenia spp. or Khaya spp.)8%
- Other
- 4412.51.31.61 Not surface covered8%
- 4412.51.31.75 Other8%
- 4412.51.41.00 Other8%
- 4412.51.51.00 OtherFree
4412.52 Blockboard, laminboard and battenboard; with at least one outer ply of non-coniferous wood, (not containing particle board)
- Plywood
- Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply
- With a face ply of birch (Betula spp.)
- 4412.52.10.30 Not surface coveredFree
- 4412.52.10.50 OtherFree
- Other
- 4412.52.31.05 Wood flooring8%
- Other
- 4412.52.31.21 With a face ply of walnut (Juglans spp.)8%
- Other
- 4412.52.31.61 Not surface covered8%
- 4412.52.31.75 Other8%
- 4412.52.41.00 Other8%
- 4412.52.51.00 OtherFree
4412.59 Blockboard, laminboard and battenboard; with both outer plies of coniferous wood
- Plywood
- Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply
- 4412.59.60.00 With a face ply of Parana pine (Araucaria angustifolia)Free
- 4412.59.70.00 With a face ply of European red pine (Pinus silvestris)3.4%
- 4412.59.80.00 Other8%
- 4412.59.90.00 Other5.1%
- 4412.59.95.00 OtherFree
4412.91 Plywood; n.e.c. in heading 4412, with at least one outer ply of tropical wood
- 4412.91.06.00 Containing at least one layer of particle boardFree
- Other
- Plywood
- Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply
- With a face ply of birch (Betula spp.)
- 4412.91.10.20 Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in lengthFree
- Other
- 4412.91.10.30 Not surface coveredFree
- 4412.91.10.40 OtherFree
- Other
- 4412.91.31.10 With a face ply of Spanish cedar (Cedrela spp.)8%
- 4412.91.31.20 With a face ply of walnut (Juglans spp.)8%
- 4412.91.31.30 With a face ply of sen (Kalopanax spp.)8%
- 4412.91.31.40 With a face ply of mahogany (Swietenia spp. or Khaya spp.)8%
- Other
- 4412.91.31.50 Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width, and 2.2 m in length8%
- 4412.91.31.60 Other, not surface covered8%
- 4412.91.31.70 Other8%
- 4412.91.41.00 Other8%
- Other
- 4412.91.51.05 Wood flooringFree
- 4412.91.51.15 OtherFree
4412.92 Plywood; n.e.c. in heading 4412, with at least one outer ply of non-coniferous wood
- 4412.92.07.00 Containing at least one layer of particle boardFree
- Other
- Plywood
- Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply
- With a face ply of birch (Betula spp.)
- 4412.92.11.20 Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in lengthFree
- Other
- 4412.92.11.30 Not surface coveredFree
- 4412.92.11.40 OtherFree
- Other
- 4412.92.31.20 With a face ply of walnut (Juglans spp.)8%
- Other
- 4412.92.31.50 Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width, and 2.2 m in length8%
- 4412.92.31.60 Other, not surface covered8%
- 4412.92.31.70 Other8%
- 4412.92.42.00 Other8%
- Other
- 4412.92.52.05 Wood flooringFree
- 4412.92.52.15 OtherFree
4412.99 Plywood; n.e.c. in heading 4412, with both outer plies of coniferous wood
- 4412.99.58.00 Containing at least one layer of particle boardFree
- Other
- Plywood
- Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply
- 4412.99.61.00 With a face ply of Parana pine (Araucaria angustifolia)Free
- 4412.99.71.00 With a face ply of European red pine (Pinus silvestris)3.4%
- 4412.99.81.00 Other8%
- 4412.99.91.00 Other5.1%
- 4412.99.97.00 OtherFree
MFN rates from the Harmonized Tariff Schedule as published, without preferences, quotas, trade remedies or additional measures. Inferred works those out for each product and origin. Whether a product from this heading qualifies for a lower rate depends on each agreement's product-specific rule for it, under the agreements we cover.
Every line in chapter 44