3901 Polymers of ethylene, in primary forms

3901.10 Ethylene polymers; in primary forms, polyethylene having a specific gravity of less than 0.94

• Linear polyethylene
• 3901.10.10.20 High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C6.5%
• 3901.10.10.50 Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³; a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and a peak melting temperature of 120 °C or more but not more than 124 °C6.5%
• 3901.10.10.60 Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min6.5%
• 3901.10.10.90 Other6.5%
• Other
• 3901.10.90.30 Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper6.5%
• 3901.10.90.90 Other6.5%

3901.20 Ethylene polymers; in primary forms, polyethylene having a specific gravity of 0.94 or more

• 3901.20.10.00 Polyethylene in one of the forms mentioned in note 6(b) to this chapter, of a specific gravity of 0,958 or more at 23 °C, containing: 50 mg/kg or less of aluminium; 2 mg/kg or less of calcium; 2 mg/kg or less of chromium; 2 mg/kg or less of iron; 2 mg/kg or less of nickel; 2 mg/kg or less of titanium and 8 mg/kg or less of vanadium; for the manufacture of chlorosulphonated polyethylene—
• 3901.20.90.00 Other6.5%

3901.30 Ethylene polymers; in primary forms, ethylene-vinyl acetate copolymers

• 3901.30.00.10 For cavity filling, for use in certain types of aircraft6.5%
• 3901.30.00.20 Copolymer of ethylene and vinyl acetate (CAS RN 24937-78-8): containing by weight 28 % or more but not more than 49 % of vinyl acetate; with a melt flow rate of less than 5g/10 min (190 °C/2.16 kg, ASTM D1238); in the form of pellets6.5%
• 3901.30.00.30 Terpolymer of ethylene, vinyl acetate and methacrylic acid (CAS RN 26375-31-5)6.5%
• 3901.30.00.99 Other6.5%

3901.40 Ethylene polymers; in primary forms, ethylene-alpha-olefin copolymers, having a specific gravity of less than 0.94

• 3901.40.00.10 High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10 min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C6.5%
• 3901.40.00.30 Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with: more than 10 % but not more than 20 % by weight of copolymer; a melt flow rate (MFR 190°C/2,16 kg) of 0,7 g / 10 min or more but not more than 0,9 g / 10 min, and a density (ASTM D4703) of 0,911 g/cm³ or more, but not more than 0,913 g/cm³; for use in the co-extrusion processing of films for flexible food packaging6.5%
• 3901.40.00.50 Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³; a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and a peak melting temperature of 120 °C or more but not more than 124 °C6.5%
• 3901.40.00.60 Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min6.5%
• 3901.40.00.90 Other6.5%

3901.90 Ethylene polymers; in primary forms, n.e.c. in heading no. 3901

• 3901.90.30.00 Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the forms mentioned in note 6(b) to this chapterFree
• Other
• 3901.90.80.10 For cavity filling, for use in certain types of aircraft6.5%
• Other
• 3901.90.80.53 Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with: an acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (ASTM D4094), and a melt flow rate of 10g/10 min (MFR 125 °C/2.16 kg, ASTM D1238) or more6.5%
• 3901.90.80.55 Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: an acrylic acid content of 6 % or more but not more than 50 % by weight, and a melt flow rate of 1g/10 min or more at 190 °C/2.16 kg (measured using ASTM D1238)6.5%
• 3901.90.80.67 Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more6.5%
• 3901.90.80.73 Mixture containing by weight: 80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and 6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)6.5%
• 3901.90.80.75 Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (CAS RN 37433-35-5), in the form of pellets6.5%
• 3901.90.80.85 Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (CAS RN 61843-70-7) in the form of pellets6.5%
• 3901.90.80.91 Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid6.5%
• 3901.90.80.92 Chlorosulphonated polyethylene6.5%
• 3901.90.80.93 Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets6.5%
• 3901.90.80.94 Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene6.5%
• 3901.90.80.97 Chlorinated polyethylene, in the form of powder6.5%
• 3901.90.80.99 OtherFree