39 Plastics and articles thereof

3901 Polymers of ethylene, in primary forms

3901.10 Ethylene polymers; in primary forms, polyethylene having a specific gravity of less than 0.94

• Linear polyethylene
• 3901.10.10.20 High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C6.5%
• 3901.10.10.50 Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³; a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and a peak melting temperature of 120 °C or more but not more than 124 °C6.5%
• 3901.10.10.60 Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min6.5%
• 3901.10.10.90 Other6.5%
• Other
• 3901.10.90.30 Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper6.5%
• 3901.10.90.90 Other6.5%

3901.20 Ethylene polymers; in primary forms, polyethylene having a specific gravity of 0.94 or more

• 3901.20.10.00 Polyethylene in one of the forms mentioned in note 6(b) to this chapter, of a specific gravity of 0,958 or more at 23 °C, containing: 50 mg/kg or less of aluminium; 2 mg/kg or less of calcium; 2 mg/kg or less of chromium; 2 mg/kg or less of iron; 2 mg/kg or less of nickel; 2 mg/kg or less of titanium and 8 mg/kg or less of vanadium; for the manufacture of chlorosulphonated polyethylene—
• 3901.20.90.00 Other6.5%

3901.30 Ethylene polymers; in primary forms, ethylene-vinyl acetate copolymers

• 3901.30.00.10 For cavity filling, for use in certain types of aircraft6.5%
• 3901.30.00.20 Copolymer of ethylene and vinyl acetate (CAS RN 24937-78-8): containing by weight 28 % or more but not more than 49 % of vinyl acetate; with a melt flow rate of less than 5g/10 min (190 °C/2.16 kg, ASTM D1238); in the form of pellets6.5%
• 3901.30.00.30 Terpolymer of ethylene, vinyl acetate and methacrylic acid (CAS RN 26375-31-5)6.5%
• 3901.30.00.99 Other6.5%

3901.40 Ethylene polymers; in primary forms, ethylene-alpha-olefin copolymers, having a specific gravity of less than 0.94

• 3901.40.00.10 High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10 min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C6.5%
• 3901.40.00.30 Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with: more than 10 % but not more than 20 % by weight of copolymer; a melt flow rate (MFR 190°C/2,16 kg) of 0,7 g / 10 min or more but not more than 0,9 g / 10 min, and a density (ASTM D4703) of 0,911 g/cm³ or more, but not more than 0,913 g/cm³; for use in the co-extrusion processing of films for flexible food packaging6.5%
• 3901.40.00.50 Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³; a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and a peak melting temperature of 120 °C or more but not more than 124 °C6.5%
• 3901.40.00.60 Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min6.5%
• 3901.40.00.90 Other6.5%

3901.90 Ethylene polymers; in primary forms, n.e.c. in heading no. 3901

• 3901.90.30.00 Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the forms mentioned in note 6(b) to this chapterFree
• Other
• 3901.90.80.10 For cavity filling, for use in certain types of aircraft6.5%
• Other
• 3901.90.80.53 Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with: an acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (ASTM D4094), and a melt flow rate of 10g/10 min (MFR 125 °C/2.16 kg, ASTM D1238) or more6.5%
• 3901.90.80.55 Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: an acrylic acid content of 6 % or more but not more than 50 % by weight, and a melt flow rate of 1g/10 min or more at 190 °C/2.16 kg (measured using ASTM D1238)6.5%
• 3901.90.80.67 Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more6.5%
• 3901.90.80.73 Mixture containing by weight: 80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and 6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)6.5%
• 3901.90.80.75 Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (CAS RN 37433-35-5), in the form of pellets6.5%
• 3901.90.80.85 Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (CAS RN 61843-70-7) in the form of pellets6.5%
• 3901.90.80.91 Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid6.5%
• 3901.90.80.92 Chlorosulphonated polyethylene6.5%
• 3901.90.80.93 Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets6.5%
• 3901.90.80.94 Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene6.5%
• 3901.90.80.97 Chlorinated polyethylene, in the form of powder6.5%
• 3901.90.80.99 OtherFree

3902 Polymers of propylene or of other olefins, in primary forms

3902.10 Propylene, other olefin polymers; polypropylene in primary forms

• 3902.10.00.20 Polypropylene, containing no plasticiser: of a melting point of more than 150 °C (as determined by the ASTM D 3417 method); of a heat of fusion of 15 J/g or more but not more than 70 J/g; of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method); of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)6.5%
• 3902.10.00.90 Other6.5%

3902.20 Propylene, other olefin polymers; polyisobutylene in primary forms

• 3902.20.00.20 Hydrogenated polyisobutene, in liquid form6.5%
• 3902.20.00.90 Other6.5%

3902.30 Propylene, other olefin polymers; propylene copolymers in primary forms

• 3902.30.00.10 For cavity filling, for use in certain types of aircraft6.5%
• Other
• 3902.30.00.20 Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene6.5%
• 3902.30.00.30 Hydrogenated copolymer of styrene, isoprene and butadiene, containing by weight 28 % or more, but not more than 55 % of propylene6.5%
• 3902.30.00.95 A-B-A block copolymer, consisting of: a copolymer of propylene and ethylene and 21 % (± 3 %) by weight of polystyrene6.5%
• 3902.30.00.97 Liquid ethylene-propylene-copolymer with: a flashpoint of 250 °C or more; a viscosity index of 150 or more; of a number average molecular weight (Mₙ) of 650 or more6.5%
• 3902.30.00.99 Other6.5%

3902.90 Propylene, other olefin polymers; n.e.c. in heading no. 3902, in primary forms

• 3902.90.10.00 A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the forms mentioned in note 6(b) to this chapterFree
• 3902.90.20.00 Polybut-1-ene, a copolymer of but-1-ene with ethylene containing by weight 10 % or less of ethylene, or a blend of polybut-1-ene with polyethylene and/or polypropylene containing by weight 10 % or less of polyethylene and/or 25 % or less of polypropylene, in one of the forms mentioned in note 6(b) to this chapterFree
• Other
• 3902.90.90.10 For cavity filling, for use in certain types of aircraft6.5%
• Other
• 3902.90.90.60 Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics: liquid at room temperature; obtained by cationic polymerisation of C-5 alkenes monomers; with a number average molecular weight (Mn) of 370 (± 50); with a weight average molecular weight (Mw) of 500 (± 100)6.5%
• 3902.90.90.63 Hydrogenated poly(1-octene) (CAS RN 70693-43-5)6.5%
• 3902.90.90.65 Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 396.5%
• 3902.90.90.70 Synthetic poly-alpha-olefin with a viscosity of 3 or more but not more than 9 centistokes (measured at 100 ° Celsius according to the ASTM D 445 method), obtained by polymerization of dodecene with or without: not more than 40 % by weight of tetradecene and/or not more than 2 % by weight decene and/or not more than 2 % by weight of hexadecene6.5%
• 3902.90.90.94 Chlorinated polyolefins, whether or not in a solution or dispersion6.5%
• 3902.90.90.99 Other6.5%

3903 Polymers of styrene, in primary forms

3903.11 Styrene polymers; expansible polystyrene, in primary forms

• 3903.11.00.00 Expansible6.5%

3903.19 Styrene polymers; (other than expansible polystyrene), in primary forms

• 3903.19.00.40 Crystalline polystyrene with: a melting point of 268 °C or more but not more than 272 °C; a setting point of 232 °C or more but not more than 247 °C; whether or not containing additives and filling material6.5%
• 3903.19.00.90 Other6.5%

3903.20 Styrene polymers; styrene-acrylonitrile (SAN) copolymers, in primary forms

• 3903.20.00.00 Styrene-acrylonitrile (SAN) copolymers6.5%

3903.30 Styrene polymers; acrylonitrile-butadiene-styrene (ABS) copolymers, in primary forms

• 3903.30.00.00 Acrylonitrile-butadiene-styrene (ABS) copolymers6.5%

3903.90 Styrene polymers; in primary forms, n.e.c. in heading no. 3903

• 3903.90.10.00 Copolymer, solely of styrene with allyl alcohol, of an acetyl value of 175 or moreFree
• 3903.90.20.00 Brominated polystyrene, containing by weight 58 % or more but not more than 71 % of bromine, in one of the forms mentioned in note 6(b) to this chapterFree
• Other
• 3903.90.90.20 Copolymer in the form of granules containing by weight: 83 ± 3 % styrene; 7 ± 2 % n-butyl acrylate; 9 ± 2 % n-butyl methacrylate and 0,01 % or more but not more than 1 % of polyolefinic wax6.5%
• 3903.90.90.35 Copolymer of _α_-methylstyrene and styrene, having a softening point exceeding 113 ºC6.5%
• 3903.90.90.38 Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1 %)6.5%
• 3903.90.90.43 Mixture of polymers consisting by weight of: -10 % or more but not more than 30 % of a styrene-ethylene-butylene-styrene block copolymer (CAS RN 66070-58-4); -25 % or more but not more than 45 % of mineral oil (CAS RN 8042-47-5); -25 % or more but not more than 45 % of calcium carbonate (CAS RN 1317-65-3); -10 % or more but not more than 20 % of polypropylene (CAS RN 9003-07-0), and -1 % or more but not more than 3 % of a copolymer of α-methylstyrene and vinyltoluene (CAS RN 9017-27-0)6.5%
• 3903.90.90.60 Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, in flake or powder form6.5%
• 3903.90.90.70 Copolymer in the form of granules containing by weight: 75 % (± 7 %) styrene and 25 % (± 7 %) methylmethacrylate6.5%
• 3903.90.90.86 Mixture containing by weight: 45% or more but not more than 65% of polymers of styrene; 30% or more but not more than 45% of poly(phenylene ether), and not more than 11% of additives6.5%
• 3903.90.90.90 Other6.5%

3904 Polymers of vinyl chloride or of other halogenated olefins, in primary forms

3904.10 Vinyl chloride, other halogenated olefin polymers; poly(vinyl chloride), not mixed with any other substances, in primary forms

• In the form of granules, for use in certain types of aircraft
• 3904.10.00.15 Suspension polyvinylchloride (‘S-PVC’), not mixed with any other substance6.5%
• 3904.10.00.21 Polyvinyl chloride polymerised through bulk (mass) polymerisation (‘M-PVC’) in pure form and not mixed with any other substance6.5%
• 3904.10.00.25 Other6.5%
• Other
• 3904.10.00.80 Suspension polyvinylchloride (‘S-PVC’), not mixed with any other substance6.5%
• 3904.10.00.81 Polyvinyl chloride polymerised through bulk (mass) polymerisation (‘M-PVC’) in pure form and not mixed with any other substance6.5%
• 3904.10.00.85 Other6.5%

3904.21 Vinyl chloride, other halogenated olefin polymers; non-plasticised poly(vinyl chloride), in primary forms, mixed with other substances

• 3904.21.00.10 In the form of granules, for use in certain types of aircraft6.5%
• 3904.21.00.90 Other6.5%

3904.22 Vinyl chloride, other halogenated olefin polymers; plasticised poly(vinyl chloride), in primary forms, mixed with other substances

• 3904.22.00.10 In the form of granules, for use in certain types of aircraft6.5%
• 3904.22.00.90 Other6.5%

3904.30 Vinyl chloride, other halogenated olefin polymers; vinyl chloride-vinyl acetate copolymers, in primary forms

• 3904.30.00.00 Vinyl chloride-vinyl acetate copolymers6.5%

3904.40 Vinyl chloride, other halogenated olefin polymers; vinyl chloride copolymers, in primary forms n.e.c. in heading no. 3904

• 3904.40.00.10 For cavity filling, for use in certain types of aircraft6.5%
• 3904.40.00.99 Other6.5%

3904.50 Vinyl chloride, other halogenated olefin polymers; vinylidene chloride polymers, in primary forms

• 3904.50.10.00 Copolymer of vinylidene chloride with acrylonitrile, in the form of expansible beads of a diameter of 4 micrometres or more but not more than 20 micrometresFree
• Other
• 3904.50.90.10 For cavity filling, for use in certain types of aircraft6.5%
• 3904.50.90.99 Other6.5%

3904.61 Halogenated olefin polymers; fluoro-polymers, polytetrafluoroethylene, in primary forms

• 3904.61.00.20 Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions6.5%
• 3904.61.00.90 Other6.5%

3904.69 Halogenated olefin polymers; fluoro-polymers (other than polytetrafluoroethylene), in primary forms

• 3904.69.10.00 Poly(vinyl fluoride), in one of the forms mentioned in note 6(b) to this chapterFree
• 3904.69.20.00 Fluoroelastomers FKM6.5%
• Other
• 3904.69.80.10 For cavity filling, for use in certain types of aircraft6.5%
• Other
• 3904.69.80.20 Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2)6.5%
• 3904.69.80.30 Copolymer of tetrafluoroethylene, hexafluoropropene and ethene6.5%
• 3904.69.80.85 Copolymer of ethylene and chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, whether or not containing fillers6.5%
• 3904.69.80.88 Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1 %)6.5%
• 3904.69.80.96 Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 396.5%
• 3904.69.80.97 Copolymer of chlorotrifluoroethylene and vinylidene difluoride6.5%
• 3904.69.80.98 Polyvinylidene difluoride (‘PVDF’), also named poly(vinylidene fluoride), in primary form, including PVDF copolymers, except copolymer of chlorotrifluoroethylene and vinylidene difluoride6.5%
• 3904.69.80.99 Other6.5%

3904.90 Vinyl chloride, other halogenated olefin polymers; n.e.c. in heading no. 3904

• 3904.90.00.10 For cavity filling, for use in certain types of aircraft6.5%
• 3904.90.00.90 Other6.5%

3905 Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers in primary forms

3905.12 Poly(vinyl acetate); in aqueous dispersion, in primary forms

• 3905.12.00.00 In aqueous dispersion6.5%

3905.19 Poly(vinyl acetate); (other than in aqueous dispersion), in primary forms

• 3905.19.00.10 For cavity filling, for use in certain types of aircraft6.5%
• 3905.19.00.90 Other6.5%

3905.21 Vinyl acetate copolymers; in aqueous dispersion, in primary forms

• 3905.21.00.00 In aqueous dispersion6.5%

3905.29 Vinyl acetate copolymers; (other than in aqueous dispersion), in primary forms

• 3905.29.00.10 For cavity filling, for use in certain types of aircraft6.5%
• 3905.29.00.90 Other6.5%

3905.30 Poly(vinyl alcohol); whether or not containing unhydrolysed acetate groups

• 3905.30.00.10 Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors6.5%
• Other
• In the form of homopolymer resins with a viscosity (measured in 4 % aqueous solution at 20 °C) of 3 mPa·s or more but not more than 61 mPa·s and a degree of hydrolysis of 80,0 mol% or more but not more than 99,9 mol%, both measured according to the ISO 15023-2 method
• 3905.30.00.91 Other than for the manufacturing of dry-blend adhesives, produced and sold in powder form for the carton board industry6.5%
• 3905.30.00.92 Other6.5%
• 3905.30.00.95 Other6.5%

3905.91 Vinyl acetate, vinyl ester polymers, vinyl polymers; n.e.c. in heading no. 3905, in primary forms, copolymers

• 3905.91.00.10 For cavity filling, for use in certain types of aircraft6.5%
• 3905.91.00.25 Copolymer of vinylcaprolactam and vinylpyrrolidone (CAS RN 51987-20-3) in the form of a solution in 2-butoxyethanol (CAS RN 111-76-2) containing by weight 45 % or more but not more than 58 % of copolymer6.5%
• 3905.91.00.35 Aqueous solution of a copolymer of vinylpyrrolidone and N,N-dimethylaminopropyl methacrylamide sulfate (CAS RN 175893-71-7), containing by weight 8 % or more, but not more than 12 % of copolymer6.5%
• 3905.91.00.40 Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 38 % of the monomer unit ethylene6.5%
• 3905.91.00.50 Aqueous solution consisting by weight of: -10 % or more but not more than 20 % of a copolymer of vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3 (methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 306769-73-3): not more than 1 % preservatives6.5%
• 3905.91.00.60 Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate (CAS RN 102972-64-5) in solid form, or as an aqueous solution containing by weight: -27 % or more but not more than 33 % of copolymer: not more than 1,5 % of ethanol (CAS RN 64-17-5); not more than 1 % of preservatives6.5%
• 3905.91.00.70 Aqueous solution, containing by weight: -25 % or more but not more than 35 % of a copolymer of vinyl caprolactam, vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3-(methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 748809-45-2); -10 % or more but not more than 16 % of ethanol (CAS RN 64-17-5) whether or not denatured with tert-butyl alcohol (CAS RN 75-65-0) and/or denatonium benzoate (CAS RN 3734-33-6)6.5%
• 3905.91.00.80 Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (CAS RN 83120-95-0)6.5%
• 3905.91.00.90 Other6.5%

3905.99 Vinyl acetate, vinyl ester polymers, vinyl polymers; n.e.c. in heading no. 3905, in primary forms, other than copolymers

• 3905.99.10.00 Poly(vinyl formal), in one of the forms mentioned in note 6(b) to this chapter, of a molecular weight of 10 000 or more but not exceeding 40 000 and containing by weight: 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcoholFree
• Other
• 3905.99.90.10 For cavity filling, for use in certain types of aircraft6.5%
• Other
• 3905.99.90.30 Povidone (INN) iodine (CAS RN 25655-41-8) with a purity by weight of 92 % or more6.5%
• 3905.99.90.81 Poly(vinyl butyral)(CAS RN 63148-65-2): containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and with a median particle size (D50) of more than 0,6 mm6.5%
• 3905.99.90.95 Hexadecylated or eicosylated polyvinylpyrrolidone6.5%
• 3905.99.90.96 Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25 000 or more but not more than 150 000 and containing by weight: 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol6.5%
• 3905.99.90.98 Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups6.5%
• 3905.99.90.99 Other6.5%

3906 Acrylic polymers in primary forms

3906.10 Acrylic polymers; poly(methyl methacrylate), in primary forms

• 3906.10.00.00 Poly(methyl methacrylate)6.5%

3906.90 Acrylic polymers; (other than polymethyl methacrylate), in primary forms

• 3906.90.10.00 Poly[N-(3-hydroxyimino-1,1-dimethylbutyl)acrylamide]Free
• 3906.90.20.00 Copolymer of 2-diisopropylaminoethyl methacrylate with decyl methacrylate, in the form of a solution in N,N-dimethylacetamide, containing by weight 55 % or more of copolymerFree
• 3906.90.30.00 Copolymer of acrylic acid with 2-ethylhexyl acrylate, containing by weight 10 % or more but not more than 11 % of 2-ethylhexyl acrylateFree
• 3906.90.40.00 Copolymer of acrylonitrile with methyl acrylate, modified with polybutadiene-acrylonitrile (NBR)Free
• 3906.90.50.00 Polymerisation product of acrylic acid with alkyl methacrylate and small quantities of other monomers, for use as a thickener in the manufacture of textile printing pastes—
• 3906.90.60.00 Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not compounded with silica5%
• Other
• 3906.90.90.17 Superabsorbent polymers, insoluble in water, which result from a polymerization of acrylic monomer molecules with crosslinkers to form crosslinked polymer networks, with a high capacity to absorb and retain water and aqueous liquids6.5%
• 3906.90.90.23 Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm6.5%
• 3906.90.90.28 Mixture containing by weight: -80 % or more but not more than 90 % of a core shell polymer of butyl acrylate, ethyl acrylate, methyl-acrylate and allyl methacrylate (CAS RN 73026-23-0) and -10 % or more but not more than 20 % of a copolymer of methyl methacrylate and ethyl acrylate (CAS RN 9010-88-2)6.5%
• 3906.90.90.43 Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (CAS RN 143106-82-5)6.5%
• 3906.90.90.50 Polymers of esters of acrylic acid with one or more of the following monomers in the chain: chloromethyl vinyl ether; chloroethyl vinyl ether; chloromethylstyrene; vinyl chloroacetate; methacrylic acid; butenedioic acid monobutyl ester; butenedioic acid monocyclohexyl ester; containing by weight not more than 5 % of each monomer unit6.5%
• 3906.90.90.58 Mixture of polymers, containing by weight: -77 % or more but not more than 81 % of polyacrylamide (CAS RN 9003-05-8); -18 % or more but not more than 21 % of polyethylene glycol (CAS RN 25322-68-3)6.5%
• 3906.90.90.60 Aqueous dispersion containing by weight: more than 10 % but not more than 15 % of ethanol, and more than 7 % but not more than 11 % of a reaction product of poly(epoxyalkylmethacrylate-co-divinylbenzene) with a glycerol derivative6.5%
• 3906.90.90.71 Acrylonitrile-styrene-acrylate copolymer in the form of granules containing by weight: -48 % of styrene; -22 % of acrylonitrile; -29 % of butylacrylate, and -1 % of dihydrodicyclopentadienyl acrylate6.5%
• 3906.90.90.73 Preparation containing by weight: 33 % or more but not more than 37 % of butyl methacrylate - methacrylic acid copolymer; 24 % or more but not more than 28 % of propylene glycol, and 37 % or more but not more than 41 % of water6.5%
• 3906.90.90.90 Other6.5%

3907 Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms

3907.10 Polyacetals; in primary forms

• 3907.10.00.00 Polyacetals6.5%

3907.21 Polyethers other than polyacetals; in primary forms, bis(polyoxyethylene) methylphosphonate

• 3907.21.00.00 Bis(polyoxyethylene) methylphosphonate6.5%

3907.29 Polyethers other than polyacetals, and bis(polyoxyethylene) methylphosphonate; in primary forms

• Polyether alcohols
• Polyethylene glycols
• 3907.29.11.10 Poly(ethylene oxide) of a number average molecular weight (Mₙ) of 100 000 or more6.5%
• 3907.29.11.20 Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mₙ) of 40 0006.5%
• 3907.29.11.30 Mixture containing by weight: -75 % or more of polyethyleneglycol modified butyl-2-cyano-3-(4-hydroxy-3-methoxyphenyl) acrylate, with an ethylene oxide chain length of not more than 30 (CAS RN 780763-40-8): not more than 25 % of ethoxylated sorbitan trioleate (CAS RN 9005-70-3)6.5%
• 3907.29.11.40 Ethoxylated glycerol (CAS RN 31694-55-0) with a hydroxyl number of 541 or more but not more than 587 (ASTM 4274)6.5%
• 3907.29.11.90 Other6.5%
• Other
• 3907.29.20.35 Mixture containing by weight: 5 % or more but not more than 15 % of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and 85 % or more but not more than 95 % of a copolymer of sucrose, propylene oxide and ethylene oxide (CAS RN 26301-10-0)6.5%
• 3907.29.20.40 Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran (CAS RN 38640-26-5) with a number average molecular weight (Mn) of 900 or more but not more than 3 6006.5%
• 3907.29.20.45 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated6.5%
• 3907.29.20.50 Poly(p-phenylene oxide) in the form of powder: with a glasstransitiontemperature of 210 °C or more; with a weight average molecular weight (Mw) of 35 000 or ore but not more than 80 000; with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram6.5%
• 3907.29.20.55 4-Nonylphenol, branched and linear, ethoxylated6.5%
• 3907.29.20.63 Preparation containing by weight; -5 % or more but not more than 15 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6) and -85 % or more but not more than 95 % of oxirane, 2-methyl-,polymer with oxirane, ether with 5-(2-(4-(bis(2-hydroxyethyl)amino)-2-methylphenyl)diazenyl)-3-methyl-2,4-thiophenedicarbonitrile (2:1) (CAS RN 515857-23-5)6.5%
• 3907.29.20.65 Preparation containing by weight; -40 % or more but not more than 60 % of oxirane, 2-methyl-, polymer with oxirane, ether with 2,2-[[3-methyl-4-[(4-methyl-2-benzothiazolyl)azo]phenyl]imino]bis[ethanol] (2:1) (CAS RN 229306-55-2) and -40 % or more but not more than 60 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)6.5%
• 3907.29.20.68 Preparation containing by weight; -90 % or more but not more than 99 % of oxirane, 2-methyl-,polymer with oxirane, ether with ethyl 3-(4-(bis(2-hydroxyethyl)amino)phenyl)-2-cyano-2-propenoate (2:1) (CAS RN 152286-82-3) and -1 % or more but not more than 10 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)6.5%
• 3907.29.20.70 Preparation containing by weight; -50 % or more but not more than 70 % of oxirane, methyl-polymer with oxirane, ether with bis(4-[bis(2-hydroxyethyl)amino)phenyl] (2-sulfophenyl)methyl (4:1), monosodium salt block (CAS RN 126042-89-5) and -30 % or more but not more than 50 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)6.5%
• 3907.29.20.73 Preparation containing by weight of; -23 % or more but not more than 36 % of oxirane, 2-methyl-,polymer with oxirane, ether with bis(4-(bis(2-hydroxyethyl)amino)phenyl)(2-sulfophenyl)methyl (4:1), monosodium salt, block (CAS RN 126042-89-5); -4 % or more but not more than 20 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6); -25 % or more but not more than 30 % of oxirane, 2-methyl-,polymer with oxirane, ether with 2,2'-((3-methyl-4-((4-methyl-2-benzothiazolyl)azo)phenyl)imino)bis(ethanol)(2:1) (CAS RN 229306-55-2); -5 % or more but not more than 10 % of oxirane, 2-methyl-,polymer with oxirane, ether with 5-(2-(4-(bis(2-hydroxyethyl)amino)-2-methylphenyl)diazenyl)-3-methyl-2,4-thiophenedicarbonitrile (2:1) (CAS RN 515857-23-5) and -15 % or more but not more than 25 % of oxirane, 2-methyl-,polymer with oxirane, ether with ethyl 3-(4-bis(2-hydroxyethyl)amino)phenyl)-2-cyano-2-propenoate (2:1) (CAS RN 152286-82-3)6.5%
• 3907.29.20.75 Preparation containing by weight; -60 % or more but not more than 80 % of Oxirane, 2-methyl-,polymer with oxirane, ether with 2,2',2",2"'-(sulfonylbis(4,1-phenylene)-2,1-diazenediyl(3-methyl-4,1-phenylene)nitrilo))tetrakis(ethanol) (4:1) (CAS RN 927432-39-1) and -20 % or more but not more than 40 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)6.5%
• 3907.29.20.90 Other6.5%
• Other
• 3907.29.91.00 Copolymer of 1-chloro-2,3-epoxypropane with ethylene oxideFree
• Other
• 3907.29.99.20 2,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane (CAS RN 697278-30-1) with a number average molecular weight (Mn) of at least 20 kDa whether or not modified with a chemical entity enabling a linkage between the PEG and a protein or a peptide6.5%
• 3907.29.99.30 Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)6.5%
• 3907.29.99.45 Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups6.5%
• 3907.29.99.50 Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient6.5%
• 3907.29.99.55 Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5 0006.5%
• 3907.29.99.60 Polytetramethylene oxide di-p-aminobenzoate6.5%
• 3907.29.99.70 Poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene) (CAS RN 29658-26-2) containing by weight not more than 35 % of additives6.5%
• 3907.29.99.90 OtherFree

3907.30 Epoxide resins; in primary forms

• Epoxide resin, halogen-free: containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin; not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and containing solvents; for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits
• 3907.30.00.05 Products containing more than 35 % by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ECH’) and an aliphatic or aromatic alcoholic component (such as BPA), in solid, semi-solid or liquid forms, having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups6.5%
• 3907.30.00.08 Other6.5%
• Epoxide resin: containing by weight 21% or more of brome; not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and containing solvents
• 3907.30.00.20 Products containing more than 35 % by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ECH’) and an aliphatic or aromatic alcoholic component (such as BPA), in solid, semi-solid or liquid forms, having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups6.5%
• 3907.30.00.23 Other6.5%
• 3907.30.00.40 Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8504, 8533, 8535, 8536, 8541, 8542 or 85486.5%
• 3907.30.00.70 Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight: 65 % or more but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), and none or not more than 0,5 % of carbon black (CAS RN 1333-86-4)6.5%
• Other
• 3907.30.00.80 Products containing more than 35 % by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ECH’) and an aliphatic or aromatic alcoholic component (such as BPA), in solid, semi-solid or liquid forms, having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups6.5%
• 3907.30.00.85 Other6.5%

3907.40 Polycarbonates; in primary forms

• 3907.40.00.25 Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of 98.5 % or more, in the form of pellets or granules, with a luminous transmittance of 88.5% or more, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)6.5%
• 3907.40.00.35 α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)6.5%
• 3907.40.00.45 α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3)6.5%
• 3907.40.00.90 Other6.5%

3907.50 Alkyd resins; in primary forms

• 3907.50.00.00 Alkyd resins6.5%

3907.61 Poly(ethylene terephthalate); in primary forms, having a viscosity of 78ml/g or higher

• 3907.61.00.20 Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol6.5%
• 3907.61.00.80 Other6.5%

3907.69 Poly(ethylene terephthalate); in primary forms, having a viscosity of less than 78ml/g

• 3907.69.00.10 Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol6.5%
• 3907.69.00.20 Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol6.5%
• 3907.69.00.90 Other6.5%

3907.70 Poly(lactic acid); in primary forms

• 3907.70.00.00 Poly(lactic acid)6.5%

3907.91 Polyesters; n.e.c. in heading no. 3907, unsaturated, in primary forms

• 3907.91.10.00 Liquid6.5%
• Other
• 3907.91.90.10 Diallyl phthalate prepolymer, in powder form6.5%
• 3907.91.90.90 Other6.5%

3907.99 Polyesters; n.e.c. in heading no. 3907, saturated, in primary forms

• 3907.99.05.00 Thermoplastic liquid crystal aromatic polyester copolymersFree
• 3907.99.10.00 Poly(ethylene naphthalene-2,6-dicarboxylate)Free
• Other
• 3907.99.80.25 Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol6.5%
• 3907.99.80.30 Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)6.5%
• 3907.99.80.35 Copolymer in form of a clear, pale yellow liquid, consisting of: phthalic acid isomers and/or aliphatic dicarboxylic acids; aliphatic diols, and fatty acid end-caps with: a hydroxyl number of 120 mg KOH or more but not more than 350 mg KOH; a viscosity at 25 °C of 2000 cPs or more but not more than 8000 cPs, and an acid value less than 10 mg KOH/g6.5%
• 3907.99.80.50 Aliphatic-aromatic copolyesters, namely polybutylene adipate-co-terephthalate (PBAT) and polybutylene sebacate-co-terephthalate (PBSeT), synthesised from petrochemical or biological feedstock, in their pure form or contained in compounds containing no less than 50 % of PBAT or PBSeT polymer by weight6.5%
• 3907.99.80.70 Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol6.5%
• 3907.99.80.80 Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles6.5%
• 3907.99.80.90 OtherFree

3908 Polyamides in primary forms

3908.10 Polyamides; polyamide-6, -11, -12, -6,6, -6,9, -6,10 or -6,12, in primary forms

• 3908.10.00.00 Polyamide-6, -11, -12, -6,6, -6,9, -6,10 or -6,126.5%

3908.90 Polyamides; n.e.c. in heading no. 3908, in primary forms

• 3908.90.00.10 Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 396.5%
• 3908.90.00.90 OtherFree

3909 Amino-resins, phenolic resins and polyurethanes, in primary forms

3909.10 Amino-resins; urea and thiourea resins, in primary forms

• 3909.10.00.00 Urea resins; thiourea resinsFree

3909.20 Amino-resins; melamine resins, in primary forms

• 3909.20.00.10 Polymer mixture, containing by weight: 60 % or more but not more than 75 % of melamine resin (CAS RN 9003-08-1); 15 % or more but not more than 25 % of silicon dioxide (CAS RN 14808-60-7 or 60676-86-0); 5 % or more but not more than 15 % of cellulose (CAS RN 9004-34-6), and 1 % or more but not more than 15 % of phenolic resin (CAS RN 25917-04-8)6.5%
• 3909.20.00.90 Other6.5%

3909.31 Amino-resins; n.e.c. in heading no. 3909, in primary forms, poly(methylene phenyl isocyanate) (Crude MDI, polymeric MDI)

• 3909.31.00.00 Poly(methylene phenyl isocyanate) (crude MDI, polymeric MDI)6.5%

3909.39 Amino-resins; n.e.c. in heading no. 3909, in primary forms, other than poly(methylene phenyl isocyanate) (Crude MDI, polymeric MDI)

• 3909.39.00.10 Formaldehyde, oligomeric reaction products with aniline (CAS RN 25214-70-4)6.5%
• 3909.39.00.90 Other6.5%

3909.40 Phenolic resins; in primary forms

• 3909.40.00.00 Phenolic resinsFree

3909.50 Polyurethanes; in primary forms

• 3909.50.10.00 Polyurethane of 2,2′-(tert-butylimino)diethanol and 4,4′-methylenedicyclohexyl diisocyanate, in the form of a solution in N,N-dimethylacetamide, containing by weight 50 % or more of polymerFree
• Other
• 3909.50.90.20 Preparation containing by weight: 14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups; 3 % or more but not more than 5 % of enzymatically modified starch, and 77 % or more but not more than 83 % of water6.5%
• 3909.50.90.30 Preparation containing by weight: 16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups; 19 % or more but not more than 23 % of diethylene glycol butyl ether, and 60 % or more but not more than 64 % of water6.5%
• 3909.50.90.40 Preparation containing by weight: 34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups; 37 % or more but not more than 39 % of propylene glycol, and 26 % or more but not more than 28 % of water6.5%
• 3909.50.90.90 Other6.5%

3910 Silicones in primary forms

3910.00 Silicones; in primary forms

• 3910.00.00.10 Liquid poly(methylhydrosiloxane) with terminal trimethylsilyl groups (CAS RN 63148-57-2) with a purity by weight of 99,9 % or more6.5%
• 3910.00.00.15 Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated6.5%
• 3910.00.00.20 Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]6.5%
• 3910.00.00.25 Preparations containing by weight: 10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5)and 10 % or more, α-Butyldimethylsilyl- ω -3-​[(2-​methyl-​1-​oxo-​2-​propen-​1-​yl)​oxy]​propyl-terminated silicone polymer (CAS RN 146632-07-7)6.5%
• 3910.00.00.35 Preparations containing by weight: 30 % or more, α -Butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6) and 10 % or more, N,N - Dimethylacrylamide (CAS RN 2680-03-7)6.5%
• 3910.00.00.40 Silicones of a kind used in the manufacture of long term surgical implants6.5%
• 3910.00.00.45 Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-100 mPa·s (CAS RN 70131-67-8)6.5%
• 3910.00.00.50 Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum6.5%
• 3910.00.00.55 Preparation containing by weight: 55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2); 30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and 1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)6.5%
• 3910.00.00.70 Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices6.5%
• 3910.00.00.85 Two-component silicone, with a viscosity of the mixture of 3 000 cps or more, but not more than 6 000 cps (according to standard GB/T 2794) for use as an electrical insulation material in solar panels junction box in the production of solar panels6.5%
• 3910.00.00.90 Other6.5%

3911 Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and similar products of chemical synthesis n.e.c. in chapter 39, in primary forms

3911.10 Petroleum resins, coumarone, indene or coumarone-indene resins and polyterpenes; in primary forms

• 3911.10.00.10 For cavity filling, for use in certain types of aircraft6.5%
• 3911.10.00.81 Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with: an iodine value of more than 120 and a Gardner Colour of more than 10 for the pure product or a Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166)6.5%
• 3911.10.00.90 Other6.5%

3911.20 Petroleum resins, poly(1,3-phenylene methylphosphonate), in primary forms

• 3911.20.00.00 Poly(1,3-phenylene methylphosphonate)6.5%

3911.90 Polysulphides, polysulphones and similar products of chemical synthesis n.e.c. in chapter 39; in primary forms

• Condensation or rearrangement polymerisation products whether or not chemically modified
• Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene), in one of the forms mentioned in note 6(b) to this chapter
• 3911.90.11.10 Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene) (CAS RN 25135-51-7 and CAS RN 25154-01-2), in one of the forms mentioned in note 6(b) to this chapter containing by weight not more than 20 % of additives3.5%
• 3911.90.11.90 Other3.5%
• 3911.90.13.00 Poly(thio-1,4-phenylene)Free
• Other
• 3911.90.19.15 Polyetherimide of: 5,5′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione) and 1,3-benzenediamine whether or not as a copolymer with 3-aminopropyl terminated dimethylsilicones (CAS RN 61128-46-9 or 99904-16-2), or 5,5′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione) and 1,4-benzenediamine (CAS RN 61128-47-0), or 4,4′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione), 5,5′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione), 4,5′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione), pyromellitic dianhydride, 1,2-benzenediamine, 1,3-benzenediamine and 1,4-benzenediamine with phthalic anhydride endcaps (CAS RN 96557-46-9)6.5%
• 3911.90.19.25 Polyamideimide of; -4-Chloroformylphthalic anhydride and 4,4′-methylenedianiline (CAS RN 35463-82-2), or -4-Chloroformyphthalic anhydride, 4,4′-oxydianiline and 1,3-phenylenediamine (CAS RN 25928-85-2); containing by weight not more than 35 % of additives6.5%
• 3911.90.19.30 Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide6.5%
• 3911.90.19.35 Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4’-biphenylene) (CAS RNs 25608-64-4 and 25839-81-0) containing by weight not more than 20 % of additives6.5%
• 3911.90.19.40 m- Xylene formaldehyde resin6.5%
• 3911.90.19.80 Poly(oxy-1,4-phenylenesulfonyl-1,4-phenylene) (CAS RN 25608-63-3 and CAS RN 25667-42-9) containing by weight not more than 20 % of additives6.5%
• 3911.90.19.90 Other6.5%
• Other
• 3911.90.92.00 Copolymer of p-cresol and divinylbenzene, in the form of a solution in N,N-dimethylacetamide containing by weight 50 % or more of polymer; hydrogenated copolymers of vinyltoluene and α-methylstyreneFree
• Other
• 3911.90.99.10 For cavity filling, for use in certain types of aircraft6.5%
• Other
• 3911.90.99.23 Aqueous solution consisting of by weight 25 % or more, but not more than 40 % of a poly(isobutylene-maleic anhydride) modified with: N,N-dimethylpropane-1,3-diamine; a copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups; ethanol; (CAS RN 497926-97-3)6.5%
• 3911.90.99.25 Copolymer of vinyltoluene and α-methylstyrene6.5%
• 3911.90.99.35 Alternated copolymer of ethylene and maleic anhydride (EMA)6.5%
• 3911.90.99.38 Mixture containing by weight: -90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and -10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4)6.5%
• 3911.90.99.40 Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight6.5%
• 3911.90.99.43 Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 ºC6.5%
• 3911.90.99.45 Copolymer of maleic acid and methyl vinyl ether6.5%
• 3911.90.99.48 Mixture containing by weight: -90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and -10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1)6.5%
• 3911.90.99.60 Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, in flake or powder form6.5%
• 3911.90.99.63 Mixture, containing by weight: 20% or more but not more than 40% of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0); 7% or more but not more than 20% of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-06-3); 40% or more, but not more than 65% of ethanol (CAS RN 64-17-5); 1% or more but not more than 7% of butan-1-ol (CAS RN 71-36-3)6.5%
• 3911.90.99.65 Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether6.5%
• 3911.90.99.70 Aqueous solution containing by weight: 30 % or more but not more than 40 % of poly-4-vinylpyridine-N-oxide; 0,1 % or more but not more than 4 % of isonicotinic acid-N-oxide; 0,1 % or more but not more than 3,5 % of sodium sulphate; 0,1 % or more but not more than 2 % of 4-acetylpyridine-N-oxide6.5%
• 3911.90.99.73 A mixture containing by weight: -89 % or more but not more than 91 % of 1,4:5,8-dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and -9 % or more but not more than 11 % of polypropylene homopolymer (CAS RN 9003-07-0)6.5%
• 3911.90.99.86 Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)6.5%
• 3911.90.99.90 OtherFree

3912 Cellulose and its chemical derivatives, n.e.c. or included, in primary forms

3912.11 Cellulose acetates; non-plasticised, in primary forms

• 3912.11.00.20 Cellulose acetate flakes6.5%
• 3912.11.00.30 Cellulose triacetate (CAS RN 9012-09-3)6.5%
• 3912.11.00.40 Cellulose diacetate powder6.5%
• 3912.11.00.90 Other6.5%

3912.12 Cellulose acetates; plasticised, in primary forms

• 3912.12.00.00 Plasticised6.5%

3912.20 Cellulose nitrates (including collodions); in primary forms

• Non-plasticised
• 3912.20.11.00 Collodions and celloidin6.5%
• 3912.20.19.00 Other6%
• 3912.20.90.00 Plasticised6.5%

3912.31 Cellulose ethers; carboxymethylcellulose and its salts, in primary forms

• 3912.31.00.00 Carboxymethylcellulose and its saltsFree

3912.39 Cellulose ethers; (other than carboxymethylcellulose and its salts), in primary forms

• 3912.39.20.00 HydroxypropylcelluloseFree
• Other
• 3912.39.85.10 Ethylcellulose, not plasticized6.5%
• 3912.39.85.20 Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose6.5%
• 3912.39.85.30 Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms6.5%
• 3912.39.85.50 Polyquaternium 10 (CAS RN 68610-92-4)6.5%
• 3912.39.85.60 Hypromellose (INN) (CAS RN 9004-65-3), for use in the manufacturing of food supplements or pharmaceuticals6.5%
• 3912.39.85.70 Methyl cellulose (CAS number 9004-67-5)6.5%
• 3912.39.85.71 Hydroxyethyl cellulose (CAS number 9004-62-0 and 80455-45-4)6.5%
• 3912.39.85.72 Hydroxyethyl methyl cellulose (CAS number 9032-42-2)6.5%
• 3912.39.85.73 Hydroxypropyl methyl cellulose (CAS number 9004-65-3)6.5%
• 3912.39.85.74 Ethyl hydroxyethyl cellulose (CAS number 9004-58-4)6.5%
• 3912.39.85.75 Methyl ethyl hydroxyethyl cellulose (CAS number 71714-29-9)6.5%
• 3912.39.85.90 OtherFree

3912.90 Cellulose and its chemical derivatives; n.e.c. in item no. 3912, in primary forms

• Cellulose esters
• 3912.90.10.20 Hydroxypropyl methylcellulose phthalate6.4%
• 3912.90.10.90 Other6.4%
• 3912.90.90.00 Other6.5%

3913 Natural polymers (e.g. alginic acid) and modified natural polymers (e.g. hardened proteins, chemical derivatives of natural rubber), n.e.c. or included, in primary forms

3913.10 Polymers, natural; alginic acid, its salts and esters, in primary forms

• 3913.10.00.20 Sodium alginate extracted from brown seaweed, with: a loss on drying of not more than 15 % by weight (4h at 105 °C); a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight5%
• 3913.10.00.90 Other5%

3913.90 Polymers, natural and modified natural; in primary forms (excluding alginic acid, its salts and esters)

• 3913.90.00.20 Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)6.5%
• 3913.90.00.40 Xanthan gum6.5%
• Sodium hyaluronate
• 3913.90.00.85 Sterile sodium hyaluronate (CAS RN 9067-32-7)6.5%
• Non sterile
• 3913.90.00.87 With: a weight average molecular weight (Mw) of not more than 900 000; an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg; an ethanol content of not more than 1% by weight; an isopropanol content of not more than 0,5% by weight6.5%
• 3913.90.00.88 Other6.5%
• 3913.90.00.95 Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9)6.5%
• 3913.90.00.99 OtherFree

3914 Ion-exchangers; based on polymers of heading no. 3901 to 3913, in primary forms

3914.00 Ion-exchangers; based on polymers of heading no. 3901 to 3913, in primary forms

• 3914.00.00.10 Aqueous suspension, containing by weight; -20 % or more but not more than 30 % of beaded agarose, modified with nitrilotriacetic acid and loaded with divalent nickel ions (CAS RN 1615227-97-8), and -20 % or more but not more than 30 % of ethanol (CAS RN 64-17-5)Free
• 3914.00.00.90 OtherFree

3915 Waste, parings and scrap, of plastics

3915.10 Ethylene polymers; waste, parings and scrap

• 3915.10.10.00 Having a specific gravity of less than 0,94 (for example, PE-LD)6.5%
• 3915.10.20.00 Having a specific gravity of 0,94 or more (for example, PE-HD)6.5%

3915.20 Styrene polymers; waste, parings and scrap

• 3915.20.00.00 Of polymers of styrene6.5%

3915.30 Vinyl chloride polymers; waste, parings and scrap

• 3915.30.00.00 Of polymers of vinyl chloride6.5%

3915.90 Plastics n.e.c. in heading no. 3915; waste, parings and scrap

• 3915.90.11.00 Of polymers of propylene6.5%
• 3915.90.20.00 Of polymers of ethylene terephthalate (for example, PET)6.5%
• 3915.90.70.00 Other6.5%

3916 Monofilament of which any cross-sectional dimension exceeds 1mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics

3916.10 Ethylene polymers; monofilament, of which any cross-sectional dimension exceeds 1mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked

• 3916.10.00.10 For use in certain types of aircraft6.5%
• 3916.10.00.90 Other6.5%

3916.20 Vinyl chloride polymers; monofilament, of which any cross-sectional dimension exceeds 1mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked

• 3916.20.00.10 For use in certain types of aircraft6.5%
• 3916.20.00.99 Other6.5%

3916.90 Plastics; monofilament, of plastics n.e.c. in heading no. 3916, cross-sectional dimension exceeds 1mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked

• Of condensation or rearrangement polymerisation products, whether or not chemically modified
• 3916.90.10.10 Rods with cellular structure, containing by weight: polyamide-6 or poly(epoxy anhydride); 7 % or more but not more than 9 % of polytetrafluorethylene if present; 10 % or more but not more than 25 % of inorganic fillers6.5%
• 3916.90.10.90 Other6.5%
• Of addition polymerisation products
• 3916.90.50.10 For use in certain types of aircraft6.5%
• 3916.90.50.90 Other6.5%
• 3916.90.90.00 Other6.5%

3917 Tubes, pipes and hoses and fittings thereof (for example, joints, elbows, flanges), of plastics

3917.10 Plastics; artificial guts (sausage casings) of hardened protein or of cellulosic materials

• 3917.10.10.00 Of hardened protein5.3%
• 3917.10.90.00 Of cellulosic materials6.5%

3917.21 Plastics; tubes, pipes and hoses thereof, rigid, of polymers of ethylene

• Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
• 3917.21.10.10 For use in certain types of aircraft6.5%
• 3917.21.10.90 Other6.5%
• Other
• 3917.21.90.10 With fittings attached, for use in civil aircraft6.5%
• 3917.21.90.20 For use in certain types of aircraft6.5%
• 3917.21.90.90 Other6.5%

3917.22 Plastics; tubes, pipes and hoses thereof, rigid, of polymers of propylene

• Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
• 3917.22.10.10 For use in certain types of aircraft6.5%
• 3917.22.10.90 Other6.5%
• Other
• 3917.22.90.10 With fittings attached, for use in civil aircraft6.5%
• 3917.22.90.20 For use in certain types of aircraft6.5%
• 3917.22.90.90 Other6.5%

3917.23 Plastics; tubes, pipes and hoses thereof, rigid, of polymers of vinyl chloride

• Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
• 3917.23.10.10 For use in certain types of aircraft6.5%
• 3917.23.10.90 Other6.5%
• Other
• 3917.23.90.10 With fittings attached, for use in civil aircraft6.5%
• 3917.23.90.20 For use in certain types of aircraft6.5%
• 3917.23.90.90 Other6.5%

3917.29 Plastics; tubes, pipes and hoses thereof, rigid, of plastics n.e.c. in heading no. 3917

• Of addition polymerisation products
• 3917.29.00.11 For use in certain types of aircraft6.5%
• 3917.29.00.19 Other6.5%
• Other
• 3917.29.00.91 With fittings attached, for use in civil aircraft6.5%
• 3917.29.00.99 Other6.5%

3917.31 Plastics; tubes, pipes and hoses thereof, flexible, having a minimum burst pressure of 27.6MPa

• 3917.31.00.10 With fittings attached, for use in civil aircraft6.5%
• 3917.31.00.20 For use in certain types of aircraft6.5%
• 3917.31.00.30 Tubings: with an outer diameter of 0,33 mm or more but not more than 3,3 mm; with an inner diameter of 0,01 mm or more but not more than 2,1 mm; suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa; suitable for all solutions used in chromatography; whether or not with fused silica; whether or not covered with PEEK; for use in chromatographic system6.5%
• 3917.31.00.90 Other6.5%

3917.32 Plastics; tubes, pipes and hoses thereof, other than those of item no. 3917.31, not reinforced or otherwise combined with other materials, without fittings

• 3917.32.00.10 For use in certain types of aircraft6.5%
• 3917.32.00.20 Tubings: with an outer diameter of 0,33 mm or more but not more than 3,3 mm; with an inner diameter of 0,01 mm or more but not more than 2,1 mm; suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa; suitable for all solutions used in chromatography; whether or not with fused silica; whether or not covered with PEEK; for use in chromatographic system6.5%
• 3917.32.00.30 Heat shrinkable tube: containing by weight 80 % or more polymer; with an insulation resistance of 90 MW or more; with a dielectric strength of 35 kV / mm or more; with a wall thickness of 0,04 mm or more, but not more than 0,9 mm; with a lay-flat width of 18 mm or more, but not more than 156 mm; for use in the manufacture of aluminium electrolytic capacitors6.5%
• 3917.32.00.90 Other6.5%

3917.33 Plastics; tubes, pipes and hoses thereof, other than those of item no. 3917.31, not reinforced or otherwise combined with other materials, with fittings

• 3917.33.00.10 With fittings attached, for use in civil aircraft6.5%
• 3917.33.00.90 Other6.5%

3917.39 Plastics; tubes, pipes and hoses thereof, n.e.c. in item no. 3917.30

• 3917.39.00.10 With fittings attached, for use in civil aircraft6.5%
• Other
• 3917.39.00.20 Tubings: with an outer diameter of 0,33 mm or more but not more than 3,3 mm; with an inner diameter of 0,01 mm or more but not more than 2,1 mm; suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa; suitable for all solutions used in chromatography; whether or not with fused silica; whether or not covered with PEEK; for use in chromatographic system6.5%
• 3917.39.00.91 For use in certain types of aircraft6.5%
• 3917.39.00.99 Other6.5%

3917.40 Plastics; tube, pipe and hose fittings (e.g. joints, elbows, flanges)

• 3917.40.00.10 For use in civil aircraft6.5%
• Other
• 3917.40.00.20 Plastic fittings (kit of nuts and ferrules or nuts) and connectors: threaded; supported with or without a stainless steel ring; suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa; for tubings with: outer diameter of 0,33 mm or more but not more than 3,3 mm; suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa; suitable for all solutions used in chromatography; for use in the production of chromatographic systems6.5%
• 3917.40.00.91 Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses6.5%
• 3917.40.00.99 Other6.5%

3918 Floor coverings of plastics, self-adhesive or not, in rolls or tiles; wall or ceiling coverings of plastics, in rolls of a width not less than 45cm

3918.10 Floor, wall or ceiling coverings; of polymers of vinyl chloride, whether or not self-adhesive, in rolls or in the form of tiles

• Consisting of a support impregnated, coated or covered with poly(vinyl chloride)
• 3918.10.10.10 For use in certain types of aircraft6.5%
• 3918.10.10.90 Other6.5%
• Other
• 3918.10.90.10 For use in certain types of aircraft6.5%
• 3918.10.90.90 Other6.5%

3918.90 Floor, wall or ceiling coverings; of plastics (excluding polymers of vinyl chloride), whether or not self-adhesive, in rolls or in the form of tiles

• 3918.90.00.10 For use in certain types of aircraft6.5%
• 3918.90.00.90 Other6.5%

3919 Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls

3919.10 Plastics; plates, sheets, film, foil, tape, strip, other flat shapes thereof, self-adhesive, in rolls of a width not exceeding 20cm

• Strips, the coating of which consists of unvulcanised natural or synthetic rubber
• 3919.10.12.00 Of poly(vinyl chloride) or of polyethylene6.3%
• 3919.10.15.00 Of polypropylene6.3%
• Other
• 3919.10.19.10 Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film6.3%
• 3919.10.19.90 Other6.3%
• Other
• 3919.10.80.10 For use in certain types of aircraft6.5%
• Other
• 3919.10.80.25 Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film6.5%
• 3919.10.80.27 Polyester film: coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner6.5%
• 3919.10.80.35 Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film6.5%
• 3919.10.80.45 Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm6.5%
• 3919.10.80.55 Acrylic foam tape: covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive; covered on the other side with an acrylic pressure sensitive adhesive; covered on one or both sides with a release sheet; with a peel adhesion of more than 25 N/cm (at an angle of 90° as determined by the ASTM D 3330 method)6.5%
• 3919.10.80.57 Reflecting sheet: of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern; covered on one or both sides with one or more layers of plastic or metallisation, and whether or not covered on one side with a self-adhesive layer and a release sheet6.5%
• 3919.10.80.63 Reflecting film consisting of: a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use; a layer of an acrylic resin having embedded glass beads; a layer of an acrylic resin hardened by a melamine cross-linking agent; a metal layer; an acrylic adhesive, and a release film6.5%
• 3919.10.80.73 Self-adhesive reflecting sheet whether or not in segmented pieces: whether or not containing a watermark; with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: a layer of acrylic or vinyl polymer; a layer of poly(methyl methacrylate) or polycarbonate containing microprisms; a layer of metallisation; an adhesive layer, and a release sheet; whether or not containing an additional layer of polyester6.5%
• 3919.10.80.75 Self adhesive reflecting film, consisting of several layers including: a copolymer of acrylic resin; polyurethane; a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use; glass microspheres, and an adhesive layer, with a release liner on one or both sides6.5%
• 3919.10.80.78 Polytetrafluoroethylene film: with a thickness of 50 µm or more; with a width of 6,30 mm or more but not more than 740 mm; an elongation at break of not more than 200 %, and coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 µm6.5%
• 3919.10.80.90 Other6.5%

3919.90 Plastics; plates, sheets, film, foil, tape, strip, other flat shapes thereof, self-adhesive, other than in rolls of a width not exceeding 20cm

• 3919.90.20.00 Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafersFree
• Other
• 3919.90.80.10 For use in certain types of aircraft6.5%
• Other
• 3919.90.80.20 Polyester film: coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner6.5%
• 3919.90.80.23 Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner6.5%
• 3919.90.80.24 Reflecting laminated sheet: consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern; covered on both sides with one or more layers of plastic material and covered on one side with an adhesive layer and a release sheet6.5%
• 3919.90.80.30 Reflecting sheet: of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern; covered on one or both sides with one or more layers of plastic or metallisation, and whether or not covered on one side with a self-adhesive layer and a release sheet6.5%
• 3919.90.80.31 Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film6.5%
• 3919.90.80.33 Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1 245 mm but not more than 1 255 mm6.5%
• 3919.90.80.45 Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm6.5%
• 3919.90.80.48 Polytetrafluoroethylene film: with a thickness of 50 µm or more; with a width of 6,30 mm or more but not more than 740 mm; an elongation at break of not more than 200 %, and coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 µm6.5%
• 3919.90.80.49 Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet6.5%
• 3919.90.80.50 Self-adhesive reflecting sheet whether or not in segmented pieces: whether or not containing a watermark; with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: a layer of acrylic or vinyl polymer; a layer of poly(methyl methacrylate) or polycarbonate containing microprisms; a layer of metallisation; an adhesive layer, and a release sheet; whether or not containing an additional layer of polyester6.5%
• 3919.90.80.53 Acrylic foam tape: covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive; covered on the other side with an acrylic pressure sensitive adhesive; covered on one or both sides with a release sheet; with a peel adhesion of more than 25 N/cm (at an angle of 90° as determined by the ASTM D 3330 method)6.5%
• 3919.90.80.54 Poly(vinyl chloride) film, on one side covered with: a polymer layer; an adhesive layer; a release liner, on one side embossed, containing oblate spheres; whether or not on the other side covered with an adhesive layer and a metallised polymer layer6.5%
• 3919.90.80.55 Black polyvinyl chloride film: with a gloss of more than 25 degrees according to ASTM D 2457; whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release liner; for use in the manufacture of die-cut films for interior and exterior surfaces of cars6.5%
• 3919.90.80.56 Transparent polyethylene film coated on one side with an aqueous acrylic adhesive, of a thickness of 30 μm to 50 μm, put up in rolls of a width of 52 cm or more but not more than 154 cm6.5%
• 3919.90.80.57 Self-adhesive polycarbonate film, printed, whether or not arched, with: a thickness of 0,3 mm or more, but not more than 0,4 mm; minimum dimensions of 63 mm x 15 mm; maximum dimensions of 278 mm x 117 mm; a weight of not more than 5 g per piece; intended for integration into combined instrument panels of passenger cars6.5%
• 3919.90.80.58 Biaxially-oriented film of poly(methyl methacrylate), with a thickness of 20 μm or more but not more than 90 μm, covered on one side with an adhesive layer and a release sheet6.5%
• 3919.90.80.65 Self-adhesive film with a thickness of 40 µm or more, but not more than 475 µm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner6.5%
• 3919.90.80.70 Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad6.5%
• 3919.90.80.80 Self adhesive reflecting film, consisting of several layers including: a copolymer of acrylic resin; polyurethane; a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use; glass microspheres, and an adhesive layer, with a release liner on one or both sides6.5%
• 3919.90.80.82 Reflecting film consisting of: a polyurethane layer; a glass microspheres layer; a metallised aluminium layer, and an adhesive, covered on one or both sides with a release liner; whether or not a poly(vinyl chloride) layer; a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use6.5%
• 3919.90.80.83 Reflector or diffuser sheets, in rolls: for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or for equal transmission and distribution of light, intended for LCD modules6.5%
• 3919.90.80.99 Other6.5%

3920 Plastics; plates, sheets, film, foil and strip (not self-adhesive); non-cellular and not reinforced, laminated, supported or similarly combined with other materials, n.e.c. in chapter 39

3920.10 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of polymers of ethylene, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• Of a thickness not exceeding 0,125 mm
• Of polyethylene having a specific gravity of
• Less than 0,94
• 3920.10.23.00 Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits—
• Stretch film, not printed
• 3920.10.24.10 For use in certain types of aircraft6.5%
• 3920.10.24.90 Other6.5%
• Other
• 3920.10.25.05 For use in certain types of aircraft6.5%
• 3920.10.25.90 Other6.5%
• 0,94 or more
• 3920.10.28.10 For use in certain types of aircraft6.5%
• 3920.10.28.99 Other6.5%
• Other
• 3920.10.40.10 For use in certain types of aircraft6.5%
• 3920.10.40.99 Other6.5%
• Of a thickness exceeding 0,125 mm
• 3920.10.81.00 Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agentFree
• Other
• 3920.10.89.10 For use in certain types of aircraft6.5%
• Other
• 3920.10.89.40 Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8 mm or more but not exceeding 1.2 mm6.5%
• 3920.10.89.90 Other6.5%

3920.20 Plastics; of polymers of propylene, plates, sheets, film, foil and strip (not self-adhesive), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• Of a thickness not exceeding 0,10 mm
• Biaxially oriented
• 3920.20.21.10 For use in certain types of aircraft6.5%
• 3920.20.21.50 Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron6.5%
• 3920.20.21.90 Other6.5%
• Other
• 3920.20.29.10 For use in certain types of aircraft6.5%
• Other
• 3920.20.29.70 Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: a thickness of 55 µm or more but not more than 97 µm; a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, and a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa6.5%
• 3920.20.29.94 Mono-axial oriented, co-extruded film: consisting of 3 to 5 layers; each layer mainly consisting of polypropylene and/or polyethylene; each layer containing not more than 10 % by weight of other polymers; whether or not containing titanium dioxide in the core layer; of an overall thickness of not more than 75 μm6.5%
• 3920.20.29.99 Other6.5%
• Of a thickness exceeding 0,10 mm
• 3920.20.80.10 For use in certain types of aircraft6.5%
• 3920.20.80.90 Other6.5%

3920.30 Plastics; of polymers of styrene, plates, sheets, film, foil and strip (not self-adhesive), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.30.00.10 Acrylonitrile-butadiene-styrene, for use in certain types of aircraft6.5%
• 3920.30.00.30 Opaque layer, whether or not printed, biaxially oriented, high impact polystyrene foil in rolls with: a thickness of 0,229 mm or more but not more than 0,279 mm; an titanium dioxide content by weight of 3 % or more but not more than 3,5 %; on one side a highly hydrophobic, chemically neutral and non-reactive coating6.5%
• 3920.30.00.90 Other6.5%

3920.43 Plastics; polymers of vinyl chloride, containing by weight not less than 6% of plasticisers; plates, sheets, film, foil and strip (not self-adhesive), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• Of a thickness not exceeding 1 mm
• 3920.43.10.10 For use in certain types of aircraft6.5%
• Other
• 3920.43.10.92 Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 µm or more but not more than 80 µm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride)6.5%
• 3920.43.10.95 Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet6.5%
• 3920.43.10.99 Other6.5%
• Of a thickness exceeding 1 mm
• 3920.43.90.10 For use in certain types of aircraft6.5%
• 3920.43.90.90 Other6.5%

3920.49 Plastics; polymers of vinyl chloride, containing by weight, less than 6% of plasticisers; plates, sheets, film, foil and strip (not self-adhesive), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• Of a thickness not exceeding 1 mm
• 3920.49.10.10 For use in certain types of aircraft6.5%
• Other
• 3920.49.10.30 Film of a (polyvinyl)chloride-copolymer: containing by weight 45 % or more of fillers; on a support6.5%
• 3920.49.10.99 Other6.5%
• Of a thickness exceeding 1 mm
• 3920.49.90.10 For use in certain types of aircraft6.5%
• 3920.49.90.90 Other6.5%

3920.51 Plastics; of acrylic polymers, polymethyl methacrylate, plates, sheets, film, foil and strip (not self-adhesive), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.51.00.20 Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm6.5%
• 3920.51.00.30 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 125μm6.5%
• 3920.51.00.40 Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)6.5%
• 3920.51.00.50 Sheets of polymethylmethacrylate conforming to standard: EN 4364 (MIL-P-5425E) and DTD5592A, or EN 4365 (MIL-P-8184) and DTD5592A6.5%
• 3920.51.00.90 Other6.5%

3920.59 Plastics; of acrylic polymers (excluding polymethyl methacrylate), plates, sheets, film, foil and strip (not self-adhesive), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.59.10.00 Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150 micrometresFree
• 3920.59.90.00 Other6.5%

3920.61 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of polycarbonates, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.61.00.30 Reflecting sheet: of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern; covered on one or both sides with one or more layers of plastic or metallisation, and whether or not covered on one side with a self-adhesive layer and a release sheet6.5%
• 3920.61.00.40 Extruded thermoplastic foils or films of polycarbonate with: matt surface texture on both sides; a thickness of more than 50 μm but not more than 200 μm; a width of 800 mm or more, but not more than 1 500 mm, and a length of 300 m or more, but not more 2500 m; for use in the production of retroreflective products6.5%
• 3920.61.00.50 Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a: total thickness of more than 230 μm but not more than 270 μm; top layer thickness of more than 40 μm but not more than 55 μm; defined surface roughness of the top layer of 0,5 μm or less (according to ISO 4287); UV-stabilized top layer6.5%
• 3920.61.00.90 Other6.5%

3920.62 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of poly(ethylene terephthalate), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• Of a thickness not exceeding 0,35 mm
• 3920.62.12.00 Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates—
• Other
• 3920.62.19.05 Poly(ethylene terephthalate) film in rolls: with a thickness of 0,335 mm or more but not more than 0,365 mm, and coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm6.5%
• 3920.62.19.08 Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either: only dyed in the mass, or dyed in the mass and metallised on one side6.5%
• 3920.62.19.28 Non-transparent poly(ethylene terephthalate) film: each outer layer with a thickness of 7 nm or more but not more than 80 nm; with a tensile strength of 300 N/cm or more (ASTM D-882); with a total thickness of 200 µm or more but not more than 350 µm, and with a width of 600 mm or more but not more than 1 600 mm; covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites6.5%
• 3920.62.19.32 Transparent poly(ethylene terephthalate) film: having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not; with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin; with a light transmittance of more than 70 %; with a haze value of not more than 1,3 %; with a total thickness of 10 µm or more but not more than 350 µm; with a width of 800 mm or more but not more than 1 600 mm6.5%
• 3920.62.19.38 Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm6.5%
• 3920.62.19.48 Sheets or rolls of poly(ethylene terephthalate): coated on both sides with a layer of epoxy acrylic resin; of a total thickness of 37 μm (± 3 μm)6.5%
• 3920.62.19.52 Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 µm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D 257 method)6.5%
• 3920.62.19.60 Poly (ethylene terephtalate) film: of a thickness of not more than 20 µm; coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm6.5%
• 3920.62.19.70 Poly(ethylene terephthalate) film in rolls with: a thickness of 35 μm or more, but not more than 75 μm; a tensile strength of 40 MPa or more in the machine direction (MD) and 200 MPa or more in the transverse direction (TD); an elongation at break of 400 % or more in MD and 30 % or more in TD; a heat shrinkage (in water at 90 °C/10s) in MD of 0,49 % or more, but not more than 0,51 %; a dynamic heat shrinkage (between 55 °C and 70 °C ) in TD of not more than 20 percentage points; a light transmittance of 85 % or more; a haze ratio of not more than 6 %; a surface tension of 38 mN/m or more; a density of 1,30 g/cm³ or more, but not more than 1,34 g/cm³; a shelf life declared by the manufacturer of not less than 12 months6.5%
• 3920.62.19.79 Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with: a thickness of 0.07 mm or more but not more than 0.15 mm; a width of 762 mm or more but not more than 1350 mm6.5%
• 3920.62.19.85 Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (FCC) (EVA) layer, a 275 µm polyethylene terephthalate (PET) layer and a 25 µm fluorinated polymer (FCC) layer with: a total thickness of 300 µm or more, but not more than 330 µm; a tensile strength of 375 N/cm or more in both the longitudinal and transverse directions (ASTM D-882); a low thermal shrinkage of 1 % or less at 150 °C for 30 minutes; a low water vapor permeability of 2,5 g/m²•d or less, and a high breakdown voltage of 18 kV or more and a partial discharge voltage of 1500 VDC or more (BG/T 123542.2-2009); to be used as a protective layer on the back of photovoltaic modules6.5%
• 3920.62.19.99 Other6.5%
• Of a thickness exceeding 0,35 mm
• 3920.62.90.10 Poly(ethylene terephthalate) film in rolls: with a thickness of 0,335 mm or more but not more than 0,365 mm, and coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm6.5%
• 3920.62.90.90 Other6.5%

3920.63 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of unsaturated polyesters, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.63.00.00 Of unsaturated polyesters6.5%

3920.69 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of polyesters n.e.c. in heading no. 3920, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.69.00.20 Film of poly(ethylene naphthalene-2,6-dicarboxylate)6.5%
• 3920.69.00.30 Mono- or multilayer, transverse oriented, shrink film: composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters; with a thickness of 20 μm or more but not more than 100 μm; with a length of 2 385 m or more but not more than 9 075 m; biodegradable and compostable (as determined by the method EN 13432)6.5%
• 3920.69.00.70 Mono- or multilayer, biaxially oriented film: composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters; with a thickness of 9 μm or more but not more than 120 μm; with a length of 1 395 m or more but not more than 21 560 m; biodegradable and compostable (as determined by the method EN 13432)6.5%
• 3920.69.00.90 Other6.5%

3920.71 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of regenerated cellulose; non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.71.00.00 Of regenerated cellulose6.5%

3920.73 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of cellulose acetate, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.73.10.00 Film in rolls or in strips, for cinematography or photography6.3%
• 3920.73.80.00 Other6.5%

3920.79 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of cellulose derivatives n.e.c. in heading no. 3920, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.79.10.00 Of vulcanised fibre5.7%
• 3920.79.90.00 Other6.5%

3920.91 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of poly(vinyl butyral), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.91.00.10 For use in certain types of aircraft6.1%
• Other
• 3920.91.00.52 Poly(vinyl butyral) film: containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser; with a thickness of 0,73 mm or more but not more than 1,50 mm6.1%
• 3920.91.00.91 Poly(vinyl butyral) film having a graduated coloured band6.1%
• 3920.91.00.93 Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: a visible light transmission of 50 % or more; coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral); a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm6.1%
• Co-extruded trilayer poly(vinyl butyral) film
• 3920.91.00.95 Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser6.1%
• 3920.91.00.97 Other6.1%
• 3920.91.00.99 Other6.1%

3920.92 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of polyamides, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.92.00.00 Of polyamides6.5%

3920.93 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of amino-resins, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.93.00.00 Of amino-resins6.5%

3920.94 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of phenolic resins, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.94.00.00 Of phenolic resins6.5%

3920.99 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of plastics n.e.c. in heading no. 3920, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• Of condensation or rearrangement polymerisation products, whether or not chemically modified
• 3920.99.21.00 Polyimide foil and strip, uncoated, or coated or covered solely with plasticFree
• Other
• 3920.99.28.40 Polymer film containing the following monomers: poly (tetramethylene ether glycol); bis (4-isocyanotocyclohexyl) methane; 1,4-butanediol or 1,3-butanediol; with a thickness of 0,25 mm or more but not more than 5,0 mm; embossed with a regular pattern on one surface; and covered with a release sheet6.5%
• 3920.99.28.50 Thermoplastic polyurethane film (TPU) based on an aliphatic polycaprolactone (PCL), transparently backed on one side with a removable protective film (PET film), with a light transmission of more than 93% (according to DIN EN ISO 13468-1), with a thickness of 25μm or more but not more than 500μm6.5%
• 3920.99.28.65 Matt, thermoplastic polyurethane foil in rolls with: a width of 1640 mm (± 10 mm); a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457); a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287); a thickness of more than 365 µm but not more than 760 µm; a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)); an elongation to break of 470 % (as determined by the method: EN ISO 527)6.5%
• 3920.99.28.70 Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: microspheres with a coating of metal, whether or not alloyed with gold; an adhesive layer; with a protective layer of silicone or poly(ethylene terephthalate) on one side; with a protective layer of poly(ethylene terephthalate) on the other side, and with a width of 5 cm or more but not more than 100 cm; with a length of not more than 2 000 m6.5%
• 3920.99.28.90 Other6.5%
• Of addition polymerisation products
• 3920.99.52.00 Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97 % or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1 mmFree
• 3920.99.53.00 Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells—
• Other
• 3920.99.59.10 For use in certain types of aircraft6.5%
• Other
• 3920.99.59.25 Poly(1-chlorotrifluoroethylene) film6.5%
• 3920.99.59.65 Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 µm or more but not more than 90 µm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %6.5%
• 3920.99.59.90 Other6.5%
• 3920.99.90.00 Other6.5%

3921 Plastic plates, sheets, film, foil and strip n.e.c. in chapter 39

3921.11 Plastics; plates, sheets, film, foil and strip, of polymers of styrene, cellular

• 3921.11.00.10 Acrylonitrile butadiene styrene, for use in certain types of aircraft6.5%
• 3921.11.00.90 Other6.5%

3921.12 Plastics; plates, sheets, film, foil and strip, of polymers of vinyl chloride, cellular

• 3921.12.00.20 For use in certain types of aircraft6.5%
• 3921.12.00.90 Other6.5%

3921.13 Plastics; plates, sheets, film, foil and strip, of polyurethanes, cellular

• 3921.13.10.00 Flexible6.5%
• 3921.13.90.00 Other6.5%

3921.14 Plastics; plates, sheets, film, foil and strip, of regenerated cellulose, cellular

• 3921.14.00.20 Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm)6.5%
• 3921.14.00.80 Other6.5%

3921.19 Plastics; plates, sheets, film, foil and strip, of plastics n.e.c. in heading no. 3921, cellular

• 3921.19.00.10 For use in certain types of aircraft6.5%
• Other
• 3921.19.00.30 Blocks with cellular structure, containing by weight: polyamide-6 or poly(epoxy anhydride); 7 % or more but not more than 9 % of polytetrafluorethylene if present; 10 % or more but not more than 25 % of inorganic fillers6.5%
• 3921.19.00.50 Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with: a total thickness of more than 0,05 mm but not more than 0,20 mm; a water entry pressure between 5 and 200 kPa according to ISO 811, and an air permeability of 0,08 cm³/cm²/s or more according to ISO 5636-56.5%
• 3921.19.00.53 Sheets of closed-cell silicone foam with: a thickness of 2,0 mm or more but not more than 4,8 mm; a thermal insulation of more than 0,25 Km²/W but not more than 0,4 Km²/W (according to ASTM-C518); a dielectric strength of more than 3,0 Kv/mm but not more than 3,8 Kv/mm (according to ASTM- D149)6.5%
• 3921.19.00.55 Strip of microporous polytetrafluoroethylene on a support of a non-woven: wound on a roll on a core of 3 inches; with a width of 69.5mm, 40.8mm, 36.5mm, 20mm, 13.5mm or 10mm; for use in the manufacture of filters for kidney dialysis equipment and intravenous application6.5%
• 3921.19.00.65 Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, for the manufacture of alkaline battery separators with: a width of 98 mm or more but not more than 170 mm; a thickness of 15 μm or more but not more than 36 μm,6.5%
• 3921.19.00.75 Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: zero transversal production direction (TD) shrinkage; a total thickness of 8 μm or more, but not more than 40 μm; a width of 15 mm or more, but not more than 900 mm; a length of more than 200 m, but not more than 8 000 m; an average pore size between 0,02 μm and 0,1 μm; whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness; whether or not coated with surfactant; whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm; whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm6.5%
• 3921.19.00.95 Film of polyethersulfone, of a thickness of not more than 200 µm6.5%
• 3921.19.00.99 Other6.5%

3921.90 Plastics; plates, sheets, film, foil and strip, other than cellular

• Of condensation or rearrangement polymerisation products, whether or not chemically modified
• Of polyesters
• 3921.90.10.05 Corrugated sheet and plates6.5%
• 3921.90.10.10 Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres6.5%
• 3921.90.10.30 Multilayer film consisting of: a poly(ethylene terephthalate) film with a thickness of more than 100 µm but not more than 150 µm; a primer of phenolic material with a thickness of more than 8 µm but not more than 15 µm; an adhesive layer of a synthetic rubber with a thickness of more than 20 µm but not more than 30 µm; and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 µm but not more than 40 µm6.5%
• 3921.90.10.90 Other6.5%
• 3921.90.30.00 Of phenolic resins6.5%
• Of amino-resins
• Laminated
• 3921.90.41.00 High-pressure laminates with a decorative surface on one or both sides6.5%
• 3921.90.43.00 Other6.5%
• 3921.90.49.00 Other6.5%
• Other
• 3921.90.55.25 Prepreg sheets or rolls containing polyimide resin6.5%
• 3921.90.55.35 Glass fibre impregnated with epoxy resin for use in the manufacture of smart cards6.5%
• 3921.90.55.40 Three layered fabric sheet, in rolls: comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta; coated on both sides with polyamide; of a total thickness not more than 135 μm; of a total weight not more than 80 g/m²6.5%
• 3921.90.55.70 Membrane composed of a polyamide layer and a polysulfone layer on a polyethylene terephthalate support layer with: a total thickness of 0,25 mm or more but not more than 0,40 mm; a total weight of 109 g/m² or more but not more than 114 g/m²6.5%
• 3921.90.55.90 Other6.5%
• Of addition polymerisation products
• 3921.90.60.10 For use in certain types of aircraft6.5%
• 3921.90.60.90 Other6.5%
• 3921.90.90.00 Other6.5%

3922 Sanitary ware; baths, shower-baths, sinks, wash-basins, bidets, lavatory pans, seats and covers, flushing cisterns and sanitary ware, of plastics

3922.10 Plastics; baths, shower-baths, sinks and wash-basins

• 3922.10.00.00 Baths, shower-baths, sinks and washbasins6.5%

3922.20 Plastics; lavatory seats and covers

• 3922.20.00.00 Lavatory seats and covers6.5%

3922.90 Plastics; bidets, lavatory pans, flushing cisterns and similar sanitary ware n.e.c. in heading no. 3922

• 3922.90.00.00 Other6.5%

3923 Plastic articles for the conveyance or packing of goods; stoppers, lids, caps and other closures of plastics

3923.10 Plastics; boxes, cases, crates and similar articles for the conveyance or packing of goods

• 3923.10.10.00 Boxes, cases, crates and similar articles, of plastic, specially shaped or fitted for the conveyance or packing of semiconductor wafers, masks, or reticlesFree
• Other
• 3923.10.90.10 Photomask or wafer compacts: consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties; having non porous, abrasion resistant or impact resistant surface properties; fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and with or without a gasket seal; of a kind used in the photolithography or other semiconductor production to house photomasks or wafers6.5%
• 3923.10.90.90 Other6.5%

3923.21 Ethylene polymers; sacks and bags (including cones), for the conveyance or packing of goods

• 3923.21.00.00 Of polymers of ethylene6.5%

3923.29 Plastics; sacks and bags (including cones), for the conveyance or packing of goods, of plastics other than ethylene polymers

• 3923.29.10.00 Of poly(vinyl chloride)6.5%
• 3923.29.90.00 Other6.5%

3923.30 Plastics; carboys, bottles, flasks and similar articles, for the conveyance or packing of goods

• 3923.30.10.00 Of a capacity not exceeding two litres6.5%
• 3923.30.90.00 Of a capacity exceeding two litres6.5%

3923.40 Plastics; spools, cops, bobbins and similar supports, for the conveyance or packing of goods

• 3923.40.10.00 Spools, reels and similar supports for photographic and cinematographic film or for tapes, films and the like of heading 85235.3%
• 3923.40.90.00 Other6.5%

3923.50 Plastics; stoppers, lids, caps and other closures, for the conveyance or packing of goods

• 3923.50.10.00 Caps and capsules for bottles6.5%
• 3923.50.90.00 Other6.5%

3923.90 Plastics; articles for the conveyance or packing of goods n.e.c. in heading no. 3923

• 3923.90.00.00 Other6.5%

3924 Tableware, kitchenware, other household articles and hygienic or toilet articles, of plastics

3924.10 Plastics; tableware and kitchenware

• Kitchenware containing polyamide or melamine
• 3924.10.00.11 Consigned from China or Hong Kong6.5%
• 3924.10.00.19 Other6.5%
• 3924.10.00.90 Other6.5%

3924.90 Plastics; household articles and hygienic or toilet articles

• 3924.90.00.10 Ironing boards, including sleeve boards, whether or not free standing, and legs and tops thereof6.5%
• 3924.90.00.90 Other6.5%

3925 Plastics; builders' wares n.e.c. or included

3925.10 Plastics; builders' ware, reservoirs, tanks, vats and similar containers of a capacity exceeding 300 litres

• 3925.10.00.00 Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300 litres6.5%

3925.20 Plastics; builders' ware, doors, windows and their frames and thresholds for doors

• 3925.20.00.00 Doors, windows and their frames and thresholds for doors6.5%

3925.30 Plastics; builders' ware, shutters, blinds (including venetian blinds) and similar articles and parts thereof

• 3925.30.00.00 Shutters, blinds (including venetian blinds) and similar articles and parts thereof6.5%

3925.90 Plastics; builders' ware, n.e.c. or included in heading no. 3925

• 3925.90.10.00 Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings6.5%
• 3925.90.20.00 Trunking, ducting and cable trays for electrical circuits6.5%
• 3925.90.80.00 Other6.5%

3926 Articles of plastics and articles of other materials of heading no. 3901 to 3914, n.e.c. in chapter 39

3926.10 Plastics; office or school supplies

• 3926.10.00.00 Office or school supplies6.5%

3926.20 Plastics; articles of apparel and clothing accessories (including gloves, mittens and mitts)

• 3926.20.00.00 Articles of apparel and clothing accessories (including gloves, mittens and mitts)6.5%

3926.30 Plastics; fittings for furniture, coachwork or the like

• 3926.30.00.40 Plastic internal door handle used in the manufacture of motor vehicles6.5%
• 3926.30.00.50 Coated interior or exterior decorative parts consisting of: a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and a PVC foil; not containing layers of copper, nickel or chromium; for use in the manufacturing of parts for motor vehicles of heading 8701 to 87056.5%
• 3926.30.00.90 Other6.5%

3926.40 Plastics; statuettes and other ornamental articles

• 3926.40.00.00 Statuettes and other ornamental articles6.5%

3926.90 Plastics; other articles n.e.c. in chapter 39

• 3926.90.50.00 Perforated buckets and similar articles used to filter water at the entrance to drains6.5%
• 3926.90.60.00 Protective face shields/visors6.5%
• Other
• 3926.90.97.05 For technical uses, for use in civil aircraft—
• 3926.90.97.10 Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 µm or more but not more than 80 µm6.5%
• 3926.90.97.22 Gaskets for road vehicles mirrors and their components, made of polyethylene foam, produced by a thermoforming process and with: a density of 20 kg/m³ or more, but not more than 40 kg/m³; a tensile strength of not less than 170 kPa; water absorption coefficient of not greater than 1 %; a length of 5 mm or more but not more than 300 mm; a height of 10 mm or more but not more than 400 mm; a depth of 5 mm or more but not more than 250 mm6.5%
• 3926.90.97.23 Plastic cover with clips for the exterior rear-view mirror of motor vehicles6.5%
• 3926.90.97.27 Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle and the base of a rear-view mirror6.5%
• 3926.90.97.30 Parts of car radio and car air-conditioner front panels: of acrylonitrile-butadiene-styrene with or without polycarbonate; coated with a copper, a nickel and a chrome layers; with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm6.5%
• 3926.90.97.33 Housings, housing parts, drums, setting wheels, frames, covers, upper part, design plate and other parts of acrylonitrile-butadiene-styrene, polycarbonate, polymethylmethacrylate or thermoplastic polyurethane, of a kind used for the manufacture of remote controls6.5%
• 3926.90.97.40 Silicone shell for breast implant6.5%
• 3926.90.97.43 Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 µm or more but not more than 4,95 μm6.5%
• 3926.90.97.48 Coated interior or exterior decorative parts consisting of: a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and a PVC foil; not containing layers of copper, nickel or chromium; for use in the manufacturing of parts for motor vehicles of heading 8701 to 87056.5%
• 3926.90.97.58 Plastic ferrules and/or plugs: supported with or without a stainless steel ring; suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, for tubings with: outer diameter of 0,33 mm or more but not more than 3,3 mm; suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa; suitable for all solutions used in chromatography, for use in the production of chromatographic systems6.5%
• 3926.90.97.60 Sheath contraceptives of polyurethaneFree
• 3926.90.97.77 Silicone decoupling ring with an inner diameter of 13,2 mm or more but no more than 17,2 mm, in immediate packings of 2 500 pieces or more, of a kind used in car parking aid sensor systems6.5%
• 3926.90.97.90 Other6.5%