8479 Machinery and mechanical appliances; having individual functions, n.e.c. in this chapter

8479.10 Machinery and mechanical appliances; for public works, building or the like

• 8479.10.00.00 Machinery for public works, building or the likeFree

8479.20 Machinery; for the extraction or preparation of animal or fixed vegetable or microbial fats or oils

• 8479.20.00.00 Machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils1.7%

8479.30 Machinery and mechanical appliances; presses for the manufacture of particle or fibre building board of wood or other ligneous materials and other machinery for treating wood or cork

• 8479.30.10.00 Presses1.7%
• 8479.30.90.00 Other1.7%

8479.40 Machines; for making rope or cable

• 8479.40.00.00 Rope- or cable-making machines1.7%

8479.50 Machinery and mechanical appliances; industrial robots, n.e.c. or included

• 8479.50.00.00 Industrial robots, not elsewhere specified or included1.7%

8479.60 Machinery and mechanical appliances; evaporative air coolers

• 8479.60.00.00 Evaporative air coolers1.7%

8479.71 Machinery and mechanical appliances; passenger boarding bridges, of a kind used in airports

• 8479.71.00.00 Of a kind used in airports1.7%

8479.79 Machinery and mechanical appliances; passenger boarding bridges, other than of a kind used in airports

• 8479.79.00.00 Other1.7%

8479.81 Machines and mechanical appliances; for treating metal, including electric wire coil-winders

• 8479.81.00.00 For treating metal, including electric wire coil-winders1.7%

8479.82 Machines; for mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring

• 8479.82.00.00 Mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring machines1.7%

8479.83 Machines and mechanical appliances; cold isostatic presses

• 8479.83.00.00 Cold isostatic presses1.7%

8479.89 Machines and mechanical appliances; having individual functions, n.e.c. or included in this chapter

• 8479.89.30.00 Mobile hydraulic-powered mine roof supports1.7%
• 8479.89.60.00 Central greasing systems1.7%
• 8479.89.70.00 Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assembliesFree
• Other
• 8479.89.97.10 The following goods, for use in civil aircraft : Hydropneumatic batteries; Mechanical actuators for thrust reversers; Toilet units specially designed; Air humidifiers and dehumidifiers; Servo-mechanisms, non-electric; Non-electric starter motors; Pneumatic starters for turbo-jets, turbopropellers and other gas turbines; Windscreen wipers, non-electric; Propeller regulators, non-electricFree
• 8479.89.97.28 Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with: electronic brake assistants; hydraulic unit driven by brushless electric motor; brake fluid reservoir; for use in the manufacture of hybrid passenger cars1.7%
• 8479.89.97.33 Pre-assembled process module unit of an ethane cracker unit, containing: various distillation columns (depropanizer, debutanizer and degreenoiler) and their associated heat exchangers, pumps and drums; a chilling train containing heat exchangers and a drum which condenses C2 in a gas stream; a system to separate hydrogen and methane from cracked gas containing heat exchangers, drums, turbines, compressors and a hydrogen purification unit (pressure swing adsorption unit); associated equipment of a C3 splitter distillation column, containing heat exchanger, pumps and drums, and a vinyl acetylene hydrogenation system, containing hydrogenation reactors, filters, mixer, drum, condenser, heat exchangers1.7%
• 8479.89.97.38 Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of: a length of 110 mm or more but not more than 140 mm; a width of 90 mm or more but not more than 130 mm; a height of 80 mm or more but not more than 110 mm; for use in the manufacture of engines of motor vehicles1.7%
• 8479.89.97.43 Pre-assembled process module unit of an ethane cracker unit, containing: a system for filtering and cooling of dried cracked gas; a deethanizer distillation column and associated equipment for C2-/C3+ separation; an acetylene hydrogenation system to remove acetylene within a C2 stream; a fuel gas drum that stores fuel gas for cracker furnaces, and a system to regenerate dryers in a cracker installation1.7%
• 8479.89.97.60 Bioreactor for biopharmaceutical cell culture: having interior surfaces of austenitic stainless steel, and with a process capacity up to 15 000 litres; whether or not combined with a “clean-in-process” system and/or a dedicated paired media hold vessel1.7%
• 8479.89.97.90 Other1.7%

8479.90 Machines and mechanical appliances; parts, of those having individual functions

• 8479.90.15.00 Parts of machines of subheading 8479 89 70Free
• Other
• Of cast iron or cast steel
• 8479.90.20.10 For use in civil aircraftFree
• 8479.90.20.90 Other1.7%
• Other
• 8479.90.70.10 For use in civil aircraftFree
• Other
• 8479.90.70.30 Silicone or plastic keyboards, comprising: parts of common metal, and whether or not comprising parts of plastic; epoxy resin reinforced with fiberglass or wood; whether or not printed or surface-treated; with or without electrical conductors; with or without a membrane bonded to the keyboard; with or without mono or multilayer protective film1.7%
• 8479.90.70.40 Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft: of a circular shape; made of steel alloy with sintering process; with not more than 8 oil chambers; with a Rockwell hardness of 55 or more; with a density of 6,5 g/cm³, or more, but not more than 6,7 g/cm³1.7%
• 8479.90.70.60 High-pressure seamless cylinders for compressed or liquefied gas, of steel, of all diameters and volume capacities, whether or not threaded, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders’ fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle1.7%
• 8479.90.70.85 Injectors with solenoid valve for optimised atomisation in the engine combustion chamber1.7%
• 8479.90.70.99 Other1.7%