84 Machinery and mechanical appliances, boilers, nuclear reactors; parts thereof

8401 Nuclear reactors; fuel elements (cartridges), non-irradiated, for nuclear reactors, machinery and apparatus for isotopic separation

8401.10 Nuclear reactors

• 8401.10.00.00 Nuclear reactors5.7%

8401.20 Machinery and apparatus; for isotopic separation, and parts thereof

• 8401.20.00.00 Machinery and apparatus for isotopic separation, and parts thereof3.7%

8401.30 Fuel elements (cartridges); non-irradiated

• 8401.30.00.20 Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors3.7%
• 8401.30.00.80 Other3.7%

8401.40 Nuclear reactors; parts thereof

• 8401.40.00.10 Stainless steel absorber control rods, filled with neutron absorbing chemical elements3.7%
• 8401.40.00.90 Other3.7%

8402 Boilers; steam or other vapour generating (other than central heating hot water boilers, capable also of producing low pressure steam), super heated water boilers

8402.11 Boilers; watertube boilers with a steam production exceeding 45t per hour

• 8402.11.00.00 Watertube boilers with a steam production exceeding 45 tonnes per hour2.7%

8402.12 Boilers; watertube boilers with a steam production not exceeding 45t per hour

• 8402.12.00.00 Watertube boilers with a steam production not exceeding 45 tonnes per hour2.7%

8402.19 Boilers; vapour generating boilers, including hybrid boilers n.e.c. in heading no. 8402

• 8402.19.10.00 Firetube boilers2.7%
• 8402.19.90.00 Other2.7%

8402.20 Boilers; super-heated water boilers

• 8402.20.00.00 Superheated water boilers2.7%

8402.90 Boilers; parts of steam or other vapour generating boilers

• 8402.90.00.00 Parts2.7%

8403 Central heating boilers; excluding those of heading no. 8402

8403.10 Boilers; central heating boilers (excluding those of heading no. 8402)

• 8403.10.10.00 Of cast iron2.7%
• 8403.10.90.00 Other2.7%

8403.90 Boilers; parts of central heating boilers (excluding those of heading no. 8402)

• 8403.90.10.00 Of cast iron2.7%
• 8403.90.90.00 Other2.7%

8404 Auxiliary plant for use with boilers of heading no. 8402 or 8403; e.g. economisers, super-heaters, soot removers, gas recoverers), condensers for steam or other vapour power units

8404.10 Boilers; auxiliary plant, for use with boilers of heading no. 8402 or 8403 (e.g. economisers, super-heaters, soot removers, gas recoverers)

• 8404.10.00.00 Auxiliary plant for use with boilers of heading 8402 or 84032.7%

8404.20 Boilers; condensers, for steam or other vapour power units

• 8404.20.00.00 Condensers for steam or other vapour power units2.7%

8404.90 Boilers; parts of auxiliary plant, for use with boilers of heading no. 8402 and 8403 and parts of condensers for steam or other vapour power units

• 8404.90.00.00 Parts2.7%

8405 Generators for producer or water gas with or without their purifiers acetylene gas generators and similar water process gas generators, with or without their purifiers

8405.10 Generators; producer gas, water gas, acetylene gas and similar water process gas generators, with or without their purifiers

• 8405.10.00.00 Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers1.7%

8405.90 Generators; parts of producer gas, water gas, acetylene gas and similar water process gas generators, with or without their purifiers

• 8405.90.00.00 Parts1.7%

8406 Turbines; steam and other vapour turbines

8406.10 Turbines; steam and other vapour turbines, for marine propulsion

• 8406.10.00.00 Turbines for marine propulsion2.7%

8406.81 Turbines; steam and other vapour turbines, (for other than marine propulsion), of an output exceeding 40MW

• 8406.81.00.10 Industrial steam turbine with: an output of more than 40 MW but not more than 90 MW; designed for a pressure of not more than 165 bar and a temperature of not more than 565 ° C; equipped with individually controlled single or double seat valves on the live steam side which are operated with a hydraulic servo of not more than 30 bar2.7%
• 8406.81.00.90 Other2.7%

8406.82 Turbines; steam and other vapour turbines, (for other than marine propulsion), of an output not exceeding 40MW

• 8406.82.00.10 Industrial steam turbine with: an output of 2 MW or more but not more than 40 MW; designed for a pressure of not more than 140 bar and a temperature of not more than 540 ° C; equipped with single – or double seat valves on the live steam side which are operated with a hydraulic servo of not more than 30 bar2.7%
• 8406.82.00.90 Other2.7%

8406.90 Turbines; parts of steam and other vapour turbines

• 8406.90.10.00 Stator blades, rotors and their blades2.7%
• 8406.90.90.00 Other2.7%

8407 Reciprocating or rotary internal combustion piston engines

8407.10 Engines; for aircraft, spark-ignition reciprocating or rotary internal combustion piston engines

• 8407.10.00.10 For use in civil aircraft—
• 8407.10.00.20 Intended to be fitted in aircraft imported duty free or built within the Community—
• 8407.10.00.90 Other1.7%

8407.21 Engines; outboard motors for marine propulsion, spark-ignition reciprocating or rotary internal combustion piston engines

• 8407.21.10.00 Of a cylinder capacity not exceeding 325 cm³6.2%
• Of a cylinder capacity exceeding 325 cm³
• 8407.21.91.00 Of a power not exceeding 30 kW4.2%
• 8407.21.99.00 Of a power exceeding 30 kW4.2%

8407.29 Engines; for marine propulsion, (other than outboard motors), spark-ignition reciprocating or rotary internal combustion piston engines

• 8407.29.00.00 Other4.2%

8407.31 Engines; reciprocating piston engines, of a kind used for the propulsion of vehicles of chapter 87, of a cylinder capacity not exceeding 50cc

• 8407.31.00.00 Of a cylinder capacity not exceeding 50 cm³2.7%

8407.32 Engines; reciprocating piston engines, of a kind used for the propulsion of vehicles of chapter 87, of a cylinder capacity exceeding 50cc but not exceeding 250cc

• 8407.32.10.00 Of a cylinder capacity exceeding 50 cm³ but not exceeding 125 cm³2.7%
• 8407.32.90.00 Of a cylinder capacity exceeding 125 cm³ but not exceeding 250 cm³2.7%

8407.33 Engines; reciprocating piston engines, of a kind used for the propulsion of vehicles of chapter 87, of a cylinder capacity exceeding 250cc but not exceeding 1000cc

• Of a cylinder capacity exceeding 250 cm³ but not exceeding 500 cm³
• 8407.33.20.10 Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of: lawn mowers of subheadings 8433 11, 8433 19 and 8433 20; tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower; four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or snowploughs and snow blowers of subheading 8430 202.7%
• 8407.33.20.90 Other2.7%
• Of a cylinder capacity exceeding 500 cm³ but not exceeding 1000 cm³
• 8407.33.80.10 Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of: lawn mowers of subheadings 8433 11, 8433 19 and 8433 20; tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower; four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or snowploughs and snow blowers of subheading 8430 202.7%
• 8407.33.80.20 New, single-cylinder, four stroke, spark-ignition internal combustion engine with: a cylinder capacity exceeding 500cm³ but not exceeding 1000 cm³; overall dimensions of not more than: 490 mm (length) x 390 mm (width) x 590 mm (height); a power of 22 kW or more but not more than 35 kW; equipped with output shaft having an end diameter of 30 mm and a taper of 6 degrees (+/- 1 degree); whether or not equipped with starter, throttle body, spark plug wire, fuel rail and injector; for use in the manufacture of all-terrain or utility task vehicles2.7%
• 8407.33.80.30 New, twin-cylinder, four-stroke, spark-ignition internal combustion engine with: a cylinder capacity exceeding 500 cm³ but not exceeding 1000 cm³; overall dimensions of not more than: 470 mm (length) x 450 mm (width) x 600 mm (height); a power of 40 kW or more but not more than 86 kW; whether or not equipped with overhead camshaft, starter motor, spark plug wires, fuel rail and injectors; for use in the manufacture of all-terrain or utility task vehicles2.7%
• 8407.33.80.90 Other2.7%

8407.34 Engines; reciprocating piston engines, of a kind used for the propulsion of vehicles of chapter 87, of a cylinder capacity exceeding 1000cc

• For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; motor vehicles of heading 8703; motor vehicles of heading 8704 with an engine of a cylinder capacity of less than 2 800 cm³; motor vehicles of heading 8705
• 8407.34.10.10 Spark-ignition reciprocating or rotary internal combustion piston engines, with: a cylinder capacity of 1 200 cm³ or more but not more than 2 000 cm³; a power of 95 kW but not more than 135 kW; a weight of not more than 120 kg; for use in the manufacture of motor vehicles of 8703—
• 8407.34.10.90 Other—
• Other
• 8407.34.30.00 Used4.2%
• New, of a cylinder capacity
• Not exceeding 1 500 cm³
• 8407.34.91.10 New dual cylinder, four stroke internal combustion spark-ignition engine with: a cylinder capacity exceeding 1000 cm³ but not exceeding 1250 cm³; overall dimensions of not more than: 700 mm (length) x 430 mm (width) x 610 mm (height); a power of 60 kW or more but not more than 110 kW; whether or not equipped with a starter, outfitted with a throttle body, two or more fuel injectors, a stator; for use in the manufacture of motorcycle bikes4.2%
• 8407.34.91.90 Other4.2%
• Exceeding 1 500 cm³
• 8407.34.99.10 New dual cylinder, air cooled, four stroke 49 degree V-twin internal combustion spark-ignition engine with: a cylinder capacity exceeding 1800 cm³; overall dimensions of not more than: 800 mm (length) x 500 mm (width) x 600 mm (height); a power of 60 kW or more but not more than 75kW; equipped with a dry sump system with an intermediate wet receptacle; whether or not equipped with a starter, outfitted with a throttle body, two or more fuel injectors, a stator; for use in the manufacture of motorcycle bikes4.2%
• 8407.34.99.90 Other4.2%

8407.90 Engines; rotary internal combustion piston engines, for other than aircraft or marine propulsion

• Of a cylinder capacity not exceeding 250 cm³
• 8407.90.10.10 Four-stroke petrol engines of a cylinder capacity of not more than 250 cm³ for use in the manufacture of garden equipment of heading 8432, 8433, 8436 or 85082.7%
• 8407.90.10.40 Power unit with a two-stroke engine with: an output of 900 W or more, but not more than 1 100 W; a cylinder displacement of more than 24 cm³ but not more than 30 cm³; a rotation speed of more than 8 400 rpm but not more than 8 600 rpm at maximum power; an idling speed of more than 2 800 rpm but not more than 3 200 rpm, and a fuel tank with a capacity of 0,5 l or more; for use in the manufacture of garden machinery and garden machinery components2.7%
• 8407.90.10.90 Other2.7%
• Of a cylinder capacity exceeding 250 cm³
• 8407.90.50.00 For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; motor vehicles of heading 8703; motor vehicles of heading 8704 with an engine of a cylinder capacity of less than 2 800 cm³; motor vehicles of heading 8705—
• Other
• Of a power not exceeding 10 kW
• 8407.90.80.10 Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of: lawn mowers of subheadings 8433 11, 8433 19 and 8433 20; tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower; four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or snowploughs and snow blowers of subheading 8430 204.2%
• 8407.90.80.90 Other4.2%
• Of a power exceeding 10 kW
• 8407.90.90.10 Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of: lawn mowers of subheadings 8433 11, 8433 19 and 8433 20; tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower; four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or snowploughs and snow blowers of subheading 8430 204.2%
• 8407.90.90.20 Compact Liquid Petroleum Gas (LPG) Engine System, with: 6 cylinders; an output of 75 kW or more, but not more than 80 kW; inlet and exhaust valves modified to operate continuously in heavy duty applications; for use in the manufacture of vehicles of heading 84274.2%
• 8407.90.90.90 Other4.2%

8408 Compression-ignition internal combustion piston engines (diesel or semi-diesel engines)

8408.10 Engines; for marine propulsion, compression-ignition internal combustion piston engines (diesel or semi-diesel engines)

• Used
• 8408.10.11.00 For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00—
• 8408.10.19.00 Other2.7%
• New, of a power
• Not exceeding 50 kW
• 8408.10.23.00 For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00—
• 8408.10.27.00 Other2.7%
• Exceeding 50 kW but not exceeding 100 kW
• 8408.10.31.00 For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00—
• 8408.10.39.00 Other2.7%
• Exceeding 100 kW but not exceeding 200 kW
• 8408.10.41.00 For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00—
• 8408.10.49.00 Other2.7%
• Exceeding 200 kW but not exceeding 300 kW
• 8408.10.51.00 For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00—
• 8408.10.59.00 Other2.7%
• Exceeding 300 kW but not exceeding 500 kW
• 8408.10.61.00 For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00—
• 8408.10.69.00 Other2.7%
• Exceeding 500 kW but not exceeding 1 000 kW
• 8408.10.71.00 For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00—
• 8408.10.79.00 Other2.7%
• Exceeding 1 000 kW but not exceeding 5 000 kW
• 8408.10.81.00 For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00—
• 8408.10.89.00 Other2.7%
• Exceeding 5 000 kW
• 8408.10.91.00 For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00—
• 8408.10.99.00 Other2.7%

8408.20 Engines; compression-ignition internal combustion piston engines (diesel or semi-diesel engines), of a kind used for the propulsion of vehicles of chapter 87

• 8408.20.10.00 For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; motor vehicles of heading 8703; motor vehicles of heading 8704 with an engine of a cylinder capacity of less than 2 500 cm³; motor vehicles of heading 8705—
• Other
• For wheeled agricultural or forestry tractors, of a power
• 8408.20.31.00 Not exceeding 50 kW4.2%
• 8408.20.35.00 Exceeding 50 kW but not exceeding 100 kW4.2%
• 8408.20.37.00 Exceeding 100 kW4.2%
• For other vehicles of Chapter 87, of a power
• 8408.20.51.00 Not exceeding 50 kW4.2%
• 8408.20.55.00 Exceeding 50 kW but not exceeding 100 kW4.2%
• 8408.20.57.00 Exceeding 100 kW but not exceeding 200 kW4.2%
• 8408.20.99.00 Exceeding 200 kW4.2%

8408.90 Engines; compression-ignition internal combustion piston engines (diesel or semi-diesel engines), of a kind used for other than marine propulsion or the vehicles of chapter 87

• 8408.90.21.00 For rail traction4.2%
• Other
• Used
• 8408.90.27.10 For use in civil aircraft—
• 8408.90.27.90 Other4.2%
• New, of a power
• Not exceeding 15 kW
• 8408.90.41.10 For use in civil aircraft—
• 8408.90.41.90 Other4.2%
• Exceeding 15 kW but not exceeding 30 kW
• 8408.90.43.10 For use in civil aircraft—
• 8408.90.43.90 Other4.2%
• Exceeding 30 kW but not exceeding 50 kW
• 8408.90.45.10 For use in civil aircraft—
• 8408.90.45.90 Other4.2%
• Exceeding 50 kW but not exceeding 100 kW
• 8408.90.47.10 For use in civil aircraft—
• 8408.90.47.90 Other4.2%
• Exceeding 100 kW but not exceeding 200 kW
• 8408.90.61.10 For use in civil aircraft—
• 8408.90.61.90 Other4.2%
• Exceeding 200 kW but not exceeding 300 kW
• 8408.90.65.10 For use in civil aircraft—
• 8408.90.65.20 Compression-ignition internal combustion piston engines: of the inline type; with a cylinder capacity of 7 000 cm³ or more but not more than 18 100 cm³; with a power of 205 kW or more but not more than 597 kW; with an exhaust after-treatment module; with external width/height/depth dimensions of not more than 1 310/1 300/1 040 mm or 2 005/1 505/1 300 mm or 2 005/1 505/1 800 mm; for use in the manufacture of crushing, screening, separation or compost turning machines4.2%
• 8408.90.65.90 Other4.2%
• Exceeding 300 kW but not exceeding 500 kW
• 8408.90.67.10 For use in civil aircraft—
• 8408.90.67.20 Compression-ignition internal combustion piston engines: of the inline type; with a cylinder capacity of 7 000 cm³ or more but not more than 18 100 cm³; with a power of 205 kW or more but not more than 597 kW; with an exhaust after-treatment module; with external width/height/depth dimensions of not more than 1 310/1 300/1 040 mm or 2 005/1 505/1 300 mm or 2 005/1 505/1 800 mm; for use in the manufacture of crushing, screening, separation or compost turning machines4.2%
• 8408.90.67.90 Other4.2%
• Exceeding 500 kW but not exceeding 1 000 kW
• 8408.90.81.10 For use in civil aircraft—
• 8408.90.81.20 Compression-ignition internal combustion piston engines: of the inline type; with a cylinder capacity of 7 000 cm³ or more but not more than 18 100 cm³; with a power of 205 kW or more but not more than 597 kW; with an exhaust after-treatment module; with external width/height/depth dimensions of not more than 1 310/1 300/1 040 mm or 2 005/1 505/1 300 mm or 2 005/1 505/1 800 mm; for use in the manufacture of crushing, screening, separation or compost turning machines4.2%
• 8408.90.81.90 Other4.2%
• Exceeding 1 000 kW but not exceeding 5 000 kW
• 8408.90.85.10 For use in civil aircraft—
• 8408.90.85.90 Other4.2%
• Exceeding 5 000 kW
• 8408.90.89.10 For use in civil aircraft—
• 8408.90.89.90 Other4.2%

8409 Parts suitable for use solely or principally with the engines of heading no. 8407 or 8408

8409.10 Engines; parts of aircraft engines (spark-ignition reciprocating or rotary internal combustion piston engines)

• 8409.10.00.10 For engines for use in civil aircraft—
• 8409.10.00.20 Intended to be fitted in aircraft imported duty free or built within the Community—
• 8409.10.00.90 Other1.7%

8409.91 Engines; parts, suitable for use solely or principally with spark-ignition internal combustion piston engines (for other than aircraft)

• 8409.91.00.28 Carburetor with : -2 mounting holes with a diameter of 31 mm: a choke bore diameter of 18 mm or more, but not more than 19,05 mm; for use in the manufacture of a two-stroke engine grass trimmer2.7%
• 8409.91.00.33 Camshaft carrier for a spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, with: a weight of 4,0 kg or more but not more than 5,5 kg; a wall thickness of 2,0 mm or more but not more than 6,0 mm; for use in the manufacture of motor vehicle engines2.7%
• 8409.91.00.35 Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with: an operating pressure of not more than 22,5 MPa; solenoid direct injector; analog pressure sensor for not more than 22,5 MPa2.7%
• 8409.91.00.38 Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, for use in the manufacture of motor vehicle engines2.7%
• 8409.91.00.40 Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles2.7%
• 8409.91.00.45 Metal alloy intake and exhaust valve, with a Rockwell hardness HRC 20 or more, for use in the manufacture of spark or compression ignition engines of motor vehicles2.7%
• 8409.91.00.50 Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm2.7%
• 8409.91.00.55 Nozzle body for the regulation of angle and distribution of fuel injection: of a cylindrical shape; made of stainless steel; with 4 or more, but not more than 16 holes; with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute2.7%
• 8409.91.00.63 Cylinder head blank for a four cylinder engine with 10 cores, made of aluminium alloy EN AC-45500, with: no other components; a hardness of 90HB or more; casting defects size of not more than 0,4 mm and not more than 10 defects per cm²; a dendrite arm space in combustion chamber of not more than 25 μm; a double deck water jacket design; a weight of 14 kg or more but not more than 19 kg; a length of 460 mm or more but not more than 510 mm; a height of 260 mm or more but not more than 286 mm and a width of 140 mm or more but not more than 150 mm2.7%
• 8409.91.00.75 Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with: an inlet diameter of 2 mm or more, but not more than 10 mm; an outlet diameter of 2 mm or more, but not more than 10 mm; an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection; a plastic covering moulded around a stainless steel tube2.7%
• 8409.91.00.80 Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes; -4 grooves: a diameter of 3 mm or more, but not more than 6 mm; a length of 25 mm or more, but not more than 35 mm; made of stainless steel with hard-chrome plating2.7%
• 8409.91.00.83 Connecting rod for connecting pistons to the crankshaft of a passenger car engine: made of an alloy containing 96 % steel and the remainder being titanium, vanadium, aluminium, chromium, nickel, copper, phosphorus, silicon, sulphur, manganese; with two connecting rod bolts; with a bushing; of a length of 120 mm or more but not more than 160 mm; with a surface roughness corresponding to ISO 4287-1997; for use in the manufacture of spark ignition motor vehicle engines2.7%
• 8409.91.00.90 Other2.7%

8409.99 Engines; parts for internal combustion piston engines (excluding spark-ignition)

• 8409.99.00.10 Injectors with solenoid valve for optimised atomisation in the engine combustion chamber2.7%
• 8409.99.00.35 The exhaust gas recirculation assembly consisting of: a control unit; an air throttle; an intake pipe; an outlet hose; for use in the manufacture of compression-ignition combustion engines of motor vehicles2.7%
• 8409.99.00.55 Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm2.7%
• 8409.99.00.70 Metal alloy intake and exhaust valve, with a Rockwell hardness HRC 20 or more, for use in the manufacture of spark or compression ignition engines of motor vehicles2.7%
• 8409.99.00.75 High pressure fuel rail of galvanized ferrite-pearlite steel with: at least one pressure sensor and one valve; a length of 314 mm or more but not more than 322 mm; an operating pressure not more than 225 MPa; an inlet temperature not more than 95°C; ambient temperature of -45°C or more but not more than 145°C; for use in the manufacture of compression ignition engines of motor vehicles2.7%
• 8409.99.00.90 Other2.7%

8410 Turbines; hydraulic water wheels and regulators therefor

8410.11 Turbines; hydraulic turbines and water wheels, of a power not exceeding 1000kW

• 8410.11.00.00 Of a power not exceeding 1 000 kW4.5%

8410.12 Turbines; hydraulic turbines and water wheels, of a power exceeding 1000kW but not exceeding 10000kW

• 8410.12.00.00 Of a power exceeding 1 000 kW but not exceeding 10 000 kW4.5%

8410.13 Turbines; hydraulic turbines and water wheels, of a power exceeding 10000kW

• 8410.13.00.00 Of a power exceeding 10 000 kW4.5%

8410.90 Turbines; parts of hydraulic turbines and water wheels, including regulators

• 8410.90.10.00 Rotors4.5%
• 8410.90.20.00 Stators4.5%
• 8410.90.90.00 Other4.5%

8411 Turbo-jets, turbo-propellers and other gas turbines

8411.11 Turbo-jets; of a thrust not exceeding 25kN

• 8411.11.00.10 For use in civil aircraft4.5%
• 8411.11.00.20 Intended to be fitted in aircraft imported duty free or built within the Community4.5%
• 8411.11.00.90 Other3.2%

8411.12 Turbo-jets; of a thrust exceeding 25kN

• Of a thrust exceeding 25 kN but not exceeding 44 kN
• 8411.12.10.10 For use in civil aircraft4.5%
• 8411.12.10.20 Intended to be fitted in aircraft imported duty free or built within the Community4.5%
• 8411.12.10.90 Other2.7%
• Of a thrust exceeding 44 kN but not exceeding 132 kN
• 8411.12.30.10 For use in civil aircraft4.5%
• 8411.12.30.20 Intended to be fitted in aircraft imported duty free or built within the Community4.5%
• 8411.12.30.90 Other2.7%
• Of a thrust exceeding 132 kN
• 8411.12.80.10 For use in civil aircraft4.5%
• 8411.12.80.20 Intended to be fitted in aircraft imported duty free or built within the Community4.5%
• 8411.12.80.90 Other2.7%

8411.21 Turbo-propellers; of a power not exceeding 1100kW

• 8411.21.00.10 For use in civil aircraft4.5%
• 8411.21.00.20 Intended to be fitted in aircraft imported duty free or built within the Community4.5%
• 8411.21.00.90 Other3.6%

8411.22 Turbo-propellers; of a power exceeding 1100kW

• Of a power exceeding 1 100 kW but not exceeding 3 730 kW
• 8411.22.20.10 For use in civil aircraft4.5%
• 8411.22.20.20 Intended to be fitted in aircraft imported duty free or built within the Community4.5%
• 8411.22.20.90 Other2.7%
• Of a power exceeding 3 730 kW
• 8411.22.80.10 For use in civil aircraft4.5%
• 8411.22.80.20 Intended to be fitted in aircraft imported duty free or built within the Community4.5%
• 8411.22.80.90 Other2.7%

8411.81 Turbines; gas-turbines (excluding turbo-jets and turbo-propellers), of a power not exceeding 5000kW

• 8411.81.00.10 For use in civil aircraft4.5%
• 8411.81.00.90 Other4.1%

8411.82 Turbines; gas-turbines (excluding turbo-jets and turbo-propellers), of a power exceeding 5000kW

• Of a power exceeding 5 000 kW but not exceeding 20 000 kW
• 8411.82.20.10 For use in civil aircraft4.5%
• 8411.82.20.90 Other4.1%
• Of a power exceeding 20 000 kW but not exceeding 50 000 kW
• 8411.82.60.10 For use in civil aircraft4.5%
• 8411.82.60.90 Other4.1%
• Of a power exceeding 50 000 kW
• 8411.82.80.10 For use in civil aircraft4.5%
• 8411.82.80.90 Other4.1%

8411.91 Turbines; parts of turbo-jets and turbo-propellers

• 8411.91.00.10 For use in civil aircraft4.5%
• 8411.91.00.20 Intended to be fitted in aircraft imported duty free or built within the Community4.5%
• 8411.91.00.90 Other2.7%

8411.99 Turbines; parts of gas turbines (excluding turbo-jets and turbo-propellers)

• 8411.99.00.10 Of gas turbines, for use in civil aircraft4.5%
• Other
• 8411.99.00.20 Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686; with a heat-resistance of not more than 1 100 °C; with a diameter of 28 mm or more, but not more than 180 mm; with a height of 20 mm or more, but not more than 150 mm4.1%
• 8411.99.00.30 Turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm4.1%
• 8411.99.00.45 Turbine ring segments, guide and rotor blades as parts of a stationary gas turbine for power generation or as a mechanical drive: made of nickel-based superalloys; for an operating temperature of more than 600 K but not more than 1600 K; with a length of not more than 500 mm; with a width of not more than 900 mm; with a height of not more than 1300 mm4.1%
• 8411.99.00.99 Other4.1%

8412 Engines and motors; n.e.c. (e.g. reaction engines, hydraulic power engines, pneumatic power engines)

8412.10 Engines; reaction engines, other than turbo-jets

• 8412.10.00.10 For use in civil aircraft4.5%
• 8412.10.00.20 Intended to be fitted in aircraft imported duty free or built within the Community4.5%
• 8412.10.00.90 Other2.2%

8412.21 Engines; hydraulic power engines and motors, linear acting (cylinders)

• Hydraulic systems
• 8412.21.20.10 For use in civil aircraft4.5%
• 8412.21.20.90 Other2.7%
• Other
• 8412.21.80.10 For use in civil aircraft4.5%
• 8412.21.80.30 Linear acting hydraulic cylinder of a kind used in the machines for handling cargo containers: with a weight of 45 kg or more but not more than 57 kg; with a diameter of 119 mm or more but not more than 149 mm; with a length of 779 mm or more but not more than 1141 mm; with a stroke of 450 mm or more but not more than 610 mm; adapted to work with hydraulic oil at a working pressure of 22 MPa or more but not more than 23 MPa; whether or not with a maintenance-free bearing without the need for lubrication2.7%
• 8412.21.80.40 Linear acting hydraulic cylinder of a kind used in the arms of machines for handling cargo containers: with a weight of 827 kg or more but not more than 935 kg; with a diameter of 250 mm or more but not more than 330 mm; with a length of 3480 mm or more but not more than 4115 mm; with a stroke of 2750 mm or more but not more than 3180 mm; adapted to work with hydraulic oil at a working pressure of 23 MPa; whether or not with a maintenance-free bearing without the need for lubrication2.7%
• 8412.21.80.90 Other2.7%

8412.29 Engines; hydraulic power engines and motors, other than linear acting (cylinders)

• Hydraulic systems
• 8412.29.20.10 For use in civil aircraft4.5%
• 8412.29.20.90 Other4.2%
• Other
• Hydraulic fluid power motors
• 8412.29.81.10 For use in civil aircraft4.5%
• 8412.29.81.90 Other4.2%
• Other
• 8412.29.89.10 For use in civil aircraft4.5%
• 8412.29.89.90 Other4.2%

8412.31 Engines; pneumatic power engines and motors, linear acting (cylinders)

• 8412.31.00.10 For use in civil aircraft4.5%
• 8412.31.00.90 Other4.2%

8412.39 Engines; pneumatic power engines and motors, other than linear acting (cylinders)

• 8412.39.00.10 For use in civil aircraft4.5%
• 8412.39.00.20 Actuator for a single-stage turbocharger, with: ¬a pressure inlet pipe and a control rod with a working stroke of 15mm or more but not more than 40mm; a maximum length of the actuator including control rod of not more than 400mm; ¬a maximum diameter of the can at the widest point of not more than 140mm, and a maximum height of the can without control rod of not more than 140mm4.2%
• 8412.39.00.90 Other4.2%

8412.80 Engines; pneumatic power engines and motors, n.e.c. in heading no. 8412

• 8412.80.10.00 Steam or other vapour power engines2.7%
• Other
• 8412.80.80.10 For use in civil aircraft4.5%
• 8412.80.80.90 Other4.2%

8412.90 Engines; parts, for engines and motors of heading no. 8412

• Of reaction engines other than turbojets
• 8412.90.20.10 For use in civil aircraft4.5%
• 8412.90.20.20 Intended to be fitted in aircraft imported duty free or built within the Community4.5%
• 8412.90.20.90 Other1.7%
• Of hydraulic power engines and motors
• 8412.90.40.10 For use in civil aircraft4.5%
• 8412.90.40.90 Other2.7%
• 8412.90.60.00 Wind turbine blades2.7%
• Other
• 8412.90.70.10 For use in civil aircraft4.5%
• 8412.90.70.20 Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with: a length of 3,5 m or more but not more than 4,5 m; a width of 2 m or more but not more than 4,2 m; a height of 1 m or more, but not more than 1,3 m; a weight of 11 tons or more but not more than 21,5 tons; mounting bores for yawdrive; a mounting flange for gearbox support; drivetrain mount; different screw sockets2.7%
• 8412.90.70.30 Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (SSDI), with: a diameter of 2 m or more, but not more than 5 m; a weight of 2 tons or more but not more than 7 tons2.7%
• 8412.90.70.90 Other2.7%

8413 Pumps; for liquids, whether or not fitted with measuring device, liquid elevators

8413.11 Pumps; fitted or designed to be fitted with a measuring device, for dispensing fuel or lubricants, of the type used in filling-stations or in garages

• 8413.11.00.00 Pumps for dispensing fuel or lubricants, of the type used in filling stations or in garages1.7%

8413.19 Pumps; for liquids, fitted or designed to be fitted with a measuring device, other than pumps for dispensing fuel or lubricants

• 8413.19.00.10 For use in civil aircraft4.5%
• 8413.19.00.90 Other1.7%

8413.20 Pumps; hand, fitted or designed to be fitted with a measuring device, for liquids, other than those of item no. 8413.11 or 8413.19

• 8413.20.00.10 For use in civil aircraft4.5%
• 8413.20.00.90 Other1.7%

8413.30 Pumps; fuel, lubricating or cooling medium pumps for internal combustion piston engines

• Injection pumps
• 8413.30.20.10 For use in civil aircraft4.5%
• 8413.30.20.30 Single-cylinder radial-piston high pressure pump for gasoline direct injection with: an operating pressure of 200 bar or more, but not more than 350 bar; a flow control, and a pressure relief valve; for use in the manufacture of engines of motor vehicles1.7%
• 8413.30.20.40 High-pressure plunger pump for direct diesel injection, with: an operating pressure of not more than 275 MPa; a camshaft; a fluid discharging of 15 cm³ per minute or more, but not more than 1 800 cm³ per minute; an electric pressure regulating valve1.7%
• 8413.30.20.60 High-pressure plunger pump for direct petrol injection: with an operating pressure of not more than 90 MPa; designed to contact the crankshaft; with an electromagnetic valve1.7%
• 8413.30.20.90 Other1.7%
• Other
• 8413.30.80.10 For use in civil aircraft4.5%
• 8413.30.80.20 Electric water pump ensuring the functionality of the water circuit also when the motor is temporarily switched off, for operating DC voltage of 9 V or more but not more than 16 V, with: capacity - pressure 0,075 MPa at 3 800 rpm; discharge of 12 l/min; whether or not with connecting cable with connector, and mounting bracket; for use in the manufacture of goods of Chapter 871.7%
• 8413.30.80.90 Other1.7%

8413.40 Pumps; concrete pumps

• 8413.40.00.00 Concrete pumps1.7%

8413.50 Pumps; reciprocating positive displacement pumps, n.e.c. in heading no. 8413, for liquids

• Hydraulic units
• 8413.50.20.10 For use in civil aircraft4.5%
• 8413.50.20.90 Other1.7%
• Dosing and proportioning pumps
• 8413.50.40.10 For use in civil aircraft4.5%
• 8413.50.40.90 Other1.7%
• Other
• Piston pumps
• Hydraulic fluid power
• 8413.50.61.10 For use in civil aircraft4.5%
• 8413.50.61.90 Other1.7%
• Other
• 8413.50.69.10 For use in civil aircraft4.5%
• 8413.50.69.90 Other1.7%
• Other
• 8413.50.80.10 For use in civil aircraft4.5%
• 8413.50.80.90 Other1.7%

8413.60 Pumps; rotary positive displacement pumps, n.e.c. in heading no. 8413, for liquids

• Hydraulic units
• 8413.60.20.10 For use in civil aircraft4.5%
• 8413.60.20.90 Other1.7%
• Other
• Gear pumps
• Hydraulic fluid power
• 8413.60.31.10 For use in civil aircraft4.5%
• 8413.60.31.90 Other1.7%
• Other
• 8413.60.39.10 For use in civil aircraft4.5%
• 8413.60.39.90 Other1.7%
• Vane pumps
• Hydraulic fluid power
• 8413.60.61.10 For use in civil aircraft4.5%
• 8413.60.61.90 Other1.7%
• Other
• 8413.60.69.10 For use in civil aircraft4.5%
• 8413.60.69.90 Other1.7%
• Screw pumps
• 8413.60.70.10 For use in civil aircraft4.5%
• 8413.60.70.90 Other1.7%
• Other
• 8413.60.80.10 For use in civil aircraft4.5%
• 8413.60.80.90 Other1.7%

8413.70 Pumps; centrifugal, n.e.c. in heading no. 8413, for liquids

• Submersible pumps
• 8413.70.21.00 Single-stage1.7%
• 8413.70.29.00 Multi-stage1.7%
• 8413.70.30.00 Glandless impeller pumps for heating systems and warm water supply1.7%
• Other, with a discharge outlet diameter
• Not exceeding 15 mm
• 8413.70.35.10 For use in civil aircraft1.7%
• 8413.70.35.89 Other1.7%
• Exceeding 15 mm
• Channel impeller pumps and side channel pumps
• 8413.70.45.10 For use in civil aircraft4.5%
• 8413.70.45.90 Other1.7%
• Radial flow pumps
• Single-stage
• With single entry impeller
• Monobloc
• 8413.70.51.10 For use in civil aircraft4.5%
• 8413.70.51.20 Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1800 W and soldered safety devices, monobloc with the motor, with: a discharge outlet diameter of 20 mm or more; -9 slots stator; -6 pole rotor: rated power of 95 W; volute with straight outlet; rotor chamber without sand filter1.7%
• 8413.70.51.30 Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1800 W and soldered safety devices, monobloc with the motor, with: a discharge outlet diameter of 20 mm or more; -9 slots stator; -6 pole rotor: rated power of 95 W; volute with clamped rubber hose outlet; rotor chamber without sand filter1.7%
• 8413.70.51.40 Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft, monobloc with the motor, volute with integrated heater, with: a discharge outlet diameter of 20 mm or more; -9 slots square or chain pole stator; -6 pole rotor: ferritic or rare earth magnets; rated power of 95 W or 80 W; heater of nominal power of 1800 W and soldered or laser welded safety, devices; volute with or without clamped rubber outlet; rotor chamber with ultrasonic welded sand filter1.7%
• 8413.70.51.90 Other1.7%
• Other
• 8413.70.59.10 For use in civil aircraft4.5%
• 8413.70.59.90 Other1.7%
• With more than one entry impeller
• 8413.70.65.10 For use in civil aircraft4.5%
• 8413.70.65.90 Other1.7%
• Multi-stage
• 8413.70.75.10 For use in civil aircraft4.5%
• 8413.70.75.90 Other1.7%
• Other centrifugal pumps
• Single-stage
• 8413.70.81.10 For use in civil aircraft4.5%
• 8413.70.81.90 Other1.7%
• Multi-stage
• 8413.70.89.10 For use in civil aircraft4.5%
• 8413.70.89.90 Other1.7%

8413.81 Pumps and liquid elevators; n.e.c. in heading no. 8413

• 8413.81.00.10 For use in civil aircraft4.5%
• 8413.81.00.90 Other1.7%

8413.82 Liquid elevators

• 8413.82.00.00 Liquid elevators1.7%

8413.91 Pumps; parts thereof

• 8413.91.00.10 For use in civil aircraft4.5%
• 8413.91.00.30 Fuel pump cover: consisting of aluminum alloys; with a diameter of 38 mm or 50 mm; with two concentric, annular grooves formed on its surface; anodized; of a kind used in motor vehicles with petrol engines1.7%
• 8413.91.00.50 Pump head for two cylinder high pressure pump made of forged steel, with: milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm; of a kind used in diesel injection systems1.7%
• 8413.91.00.90 Other1.7%

8413.92 Liquid elevators; parts thereof

• 8413.92.00.00 Of liquid elevators1.7%

8414 Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan; gas-tight biological safety cabinets whether or not fitted with filters

8414.10 Pumps; vacuum

• 8414.10.15.00 Of a kind used for the manufacture of semiconductors or solely or principally used for the manufacture of flat panel displaysFree
• Other
• Rotary piston pumps, sliding vane rotary pumps, molecular drag pumps and Roots pumps
• 8414.10.25.10 For use in civil aircraft4.5%
• 8414.10.25.30 Tandem pump consisting of: an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1 000 revolutions per minute; vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of -666 mbar in 6 seconds at 750 revolutions per minute; for use in the manufacture of engines of motor vehicles1.7%
• 8414.10.25.90 Other1.7%
• Other
• Diffusion pumps, cryopumps and absorption pumps
• 8414.10.81.10 For use in civil aircraft4.5%
• 8414.10.81.90 Other1.7%
• Other
• 8414.10.89.10 For use in civil aircraft4.5%
• 8414.10.89.90 Other1.7%

8414.20 Pumps; hand or foot-operated air pumps

• 8414.20.20.00 Handpumps for cycles1.7%
• Other
• 8414.20.80.10 For use in civil aircraft4.5%
• 8414.20.80.90 Other2.2%

8414.30 Compressors; of a kind used in refrigerating equipment

• Of a power not exceeding 0,4 kW
• 8414.30.20.10 For use in civil aircraft4.5%
• 8414.30.20.60 Hermetic compressor for R290 refrigerant for the production of refrigerators and freezers: with a power not exceeding 0.4 kW; pre-filled with lubricant from 190 ml to 210 ml; suction and processing pipe inner diameter from 6.40 mm to 6.60 mm; discharge pipe inner diameter from 4.80 mm to 5.00 mm; driven by a brushless DC motor; cooling capacity from 340 to 360 W at ASHRAE LBP 3000 rpm; displacement from 6.5 cm³ to 7.5 cm³; speed range from 1,600 rpm to 4,200 rpm2.2%
• 8414.30.20.90 Other2.2%
• Of a power exceeding 0,4 kW
• Hermetic or semi-hermetic
• 8414.30.81.10 For use in civil aircraft4.5%
• Other
• 8414.30.81.50 Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm³, of the type used in refrigeration equipment2.2%
• 8414.30.81.60 Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants: driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors; with a nominal power rating of not more than 1,5kW; a rated voltage of 100V or more but not more than 240V; with a height of not more than 300mm; an external diameter of not more than 150mm; with a unit weight of not more than 15kg; for use in the manufacture of heat pumps for household appliances, including clothes dryers2.2%
• 8414.30.81.89 Other2.2%
• Other
• 8414.30.89.10 For use in civil aircraft4.5%
• 8414.30.89.20 Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW2.2%
• 8414.30.89.40 Electrical compressor for motor vehicle air conditioning system: with a power output of more than 0,4 kW but not exceeding 10 kW; for use in the manufacture of motor vehicles of subheading 8703 402.2%
• 8414.30.89.90 Other2.2%

8414.40 Compressors; air compressors mounted on a wheeled chassis for towing

• 8414.40.10.00 Giving a flow per minute not exceeding 2 m³2.2%
• 8414.40.90.00 Giving a flow per minute exceeding 2 m³2.2%

8414.51 Fans; table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125W

• 8414.51.00.10 For use in civil aircraft4.5%
• 8414.51.00.90 Other3.2%

8414.59 Fans; n.e.c. in item no. 8414.51

• 8414.59.15.00 Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machinesFree
• Other
• Axial fans
• 8414.59.25.10 For use in civil aircraft4.5%
• 8414.59.25.50 Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air with: a direct current operating voltage of more than 10 V but not more than 14 V, or an alternating current operating voltage of more than 185 V, but not more than 254 V; an operating temperature of -40 °C or higher, but not higher than 70 °C; for use in the manufacture of heat pump tumble dryers and refrigerators or freezers2.3%
• 8414.59.25.60 Axial Fan, for incorporation into instrument clusters, speedometers and infotainment systems of transport vehicles as motor vehicles of headings 8701 to 8705, with: an air flow of not more than 0,75 m3/min (cubic meter per minute); an air pressure of not more than 10 mmH2O; an overall acoustic noise of not more than 45 dB(A); a diameter of not more than 65mm; Equipped with DC Brushless motor with: a rated voltage between: 3 to 16 VDC; an operating voltage between: 3 to 16 VDC; a rated current between: 0,03 to 0,30 A; an input power between: 0,3 to 1,5 W; a rotation speed between: 2500 to 10000 R.P.M; With or without a heat sink incorporated2.3%
• 8414.59.25.90 Other2.3%
• Centrifugal fans
• 8414.59.35.10 For use in civil aircraft4.5%
• 8414.59.35.20 Radial fan, with: a dimension of 25mm (height) x 85mm (width) x 85mm (depth); a weight of 120 g; a rated voltage of 13,6 VDC (direct current voltage); an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage); a rated current of 1,1 A (TYP); a rated power of 15 W; a rotation speed of 500 RPM (revolutions per minute) or more but not more than 4800 RPM (revolutions per minute) (free flow); an air flow of not more than 17,5 litre/s; an air pressure of not more than16 mm H2O ≈ 157 Pa; an overall sound pressure of not more than 58 dB(A) at 4800 RPM (revolutions per minute), and with a FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems2.3%
• 8414.59.35.30 Electric blower for cooling the high-voltage battery of a hybrid passenger car with: a control unit; MOSFET inverter; a voltage of 9 V or more but not more than 16 V; ambient temperature of - 40 °C or more, but not more than 80 °C; for use in the manufacture of hybrid passenger cars2.3%
• 8414.59.35.40 Electric blower for cooling the battery module: with an operating voltage of 9 VDC or more but not more than 16 VDC; with a centrifugal electric fan; with a connector; with a plastic case; with or without a control unit for the fan electric motor; for use in the production of rechargeable batteries for hybrid and electric vehicles2.3%
• 8414.59.35.50 DC motor centrifugal fan with: a nominal voltage of 8 V or more, but not more than 13 V; a nominal maximum speed of 1400 rpm or more, but not more than 1950 rpm; a horizontal or vertical position of the fan blades shaft; a boosting time of not more than 10 seconds; a cable with a length of 30 cm or more, but not more than 50 cm, with RAST 2,5 connector; a nominal power of 0,7 W or more, but not more than 3,5 W; a tacho or feedback signal to monitor the speed2.3%
• 8414.59.35.90 Other2.3%
• Other
• 8414.59.95.10 For use in civil aircraft4.5%
• 8414.59.95.90 Other2.3%

8414.60 Hoods; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters, having a maximum horizontal side not exceeding 120cm

• 8414.60.00.00 Hoods having a maximum horizontal side not exceeding 120 cm2.7%

8414.70 Gas-tight biological safety cabinets; whether or not fitted with filters, having a maximum horizontal side not exceeding 120cm

• 8414.70.00.00 Gas-tight biological safety cabinets2.2%

8414.80 Pumps and compressors; for air, vacuum or gas, n.e.c. in heading no. 8414

• Turbo-compressors
• Single-stage
• 8414.80.11.10 For use in civil aircraft4.5%
• 8414.80.11.90 Other2.2%
• Multi-stage
• 8414.80.19.10 For use in civil aircraft4.5%
• 8414.80.19.90 Other2.2%
• Reciprocating displacement compressors, having a gauge pressure capacity of
• Not exceeding 15 bar, giving a flow per hour
• Not exceeding 60 m³
• 8414.80.22.10 For use in civil aircraft4.5%
• 8414.80.22.20 Air membrane compressor with: a flow of 4,5 l/min or more, but not more than 12 l/min; power input of not more than 14 W, and a gauge pressure capacity not exceeding 400 hPa (0,4 bar); of a kind used in the production of motor vehicle seats2.2%
• 8414.80.22.90 Other2.2%
• Exceeding 60 m³
• 8414.80.28.10 For use in civil aircraft4.5%
• 8414.80.28.90 Other2.2%
• Exceeding 15 bar, giving a flow per hour
• Not exceeding 120 m³
• 8414.80.51.10 For use in civil aircraft4.5%
• 8414.80.51.90 Other2.2%
• Exceeding 120 m³
• 8414.80.59.10 For use in civil aircraft4.5%
• 8414.80.59.90 Other2.2%
• Rotary displacement compressors
• Single-shaft
• 8414.80.73.10 For use in civil aircraft4.5%
• Other
• 8414.80.73.30 Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants: driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors; with a nominal power rating of not more than 1,5kW; a rated voltage of 100V or more but not more than 240V; with a height of not more than 300mm; an external diameter of not more than 150mm; with a unit weight of not more than 15kg; for use in the manufacture of heat pumps for household appliances, including clothes dryers2.2%
• 8414.80.73.50 Hermetic heat pump compressor for R450A or R290 refrigerants: not charged with refrigerant; pre-charged with lubricant oil; with a single phase induction permanent split capacitor motor or a DC brushless motor; having suction and/or discharge connections; with a displacement of 8,05 cm3 or more, but not more than 55 cm3; running at 900 rpm or more, but not more than 7 800 rpm, and with a cooling capacity of 920 W or more, but not more than 10 440 W in ASHRAE conditions2.2%
• 8414.80.73.89 Other2.2%
• Multi-shaft
• Screw compressors
• 8414.80.75.10 For use in civil aircraft4.5%
• 8414.80.75.90 Other2.2%
• Other
• 8414.80.78.10 For use in civil aircraft4.5%
• 8414.80.78.90 Other2.2%
• Other
• 8414.80.80.10 For use in civil aircraft4.5%
• 8414.80.80.90 Other2.2%

8414.90 Pumps and compressors; parts, of air or vacuum pumps, air or other gas compressors and fans, ventilating or recycling hoods incorporating a fan

• 8414.90.00.10 For use in civil aircraft4.5%
• 8414.90.00.15 Fan assembly made of aluminium and magnesium alloy: with an outer diameter of 54 mm or more but not more than 130 mm; with a height of 8 mm or more but not more than 30 mm; with two discs connected by blades of involute shape; with or without dowel, and with or without washer; for use in the manufacture of electromotors2.2%
• 8414.90.00.20 Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles2.2%
• 8414.90.00.25 Scroll type compressor housing of an aluminium alloy of a kind with: a heat resistance of 200 °C or more but not more than 250 °C; one or more fixing points suitable for mounting an actuator; for use in the manufacture of turbochargers2.2%
• 8414.90.00.35 Compressor head unit made of impregnated aluminium alloy for installation in air-conditioning compressors for motor vehicles with: a width of 115 mm or more but not more than 160 mm; a length of 115 mm or more but not more than 170 mm; a height of 30 mm or more but not more than 100 mm; a piece of pressure branch with pipe connection; one or two mounting holes and more than one overflowing hole2.2%
• 8414.90.00.45 Pressure casted rotor front plate or cover of an electric supercharger: of EN AC-46000 aluminium; shot-blasted and machined; with a hardness of 60 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506); with a tensile strength of 240 N/mm2 or more; with a height of 22 mm or more but not more than 26 mm; with a diameter of 128 mm or more but not more than 136 mm; with a weight of 220 g or more but not more than 250 g2.2%
• 8414.90.00.55 Air conditioning compressor housing component made of aluminum alloy for installation in electric air conditioning compressors for motor vehicles: with a width of 100 mm or more but not more than 220 mm; with a length of 100 mm or more but not more than 230 mm; with a height of 80 mm or more but not more than 180 mm; with one single central bore; machined by CNC milling or unwrought; whether or not impregnated; with one suction port or without2.2%
• 8414.90.00.80 Turbocharger wheel housing of cast aluminium alloy or cast iron: with a heat resistance up to 400°C; with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel; for use in the automotive industry2.2%
• 8414.90.00.90 Other2.2%

8415 Air conditioning machines; comprising a motor driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated

8415.10 Air conditioning machines; comprising a motor-driven fan and elements for changing the temperature and humidity, of a kind designed to be fixed to a window, wall, ceiling or floor, self-contained or split-system

• Self-contained
• 8415.10.10.10 Pre-charged with hydrofluorocarbons (HFCs)2.2%
• 8415.10.10.90 Other2.2%
• Split-system
• 8415.10.90.10 Pre-charged with hydrofluorocarbons (HFCs)2.5%
• 8415.10.90.90 Other2.5%

8415.20 Air conditioning machines; comprising a motor driven fan and elements for changing the temperature and humidity, of a kind used for persons, in motor vehicles

• 8415.20.00.10 Pre-charged with hydrofluorocarbons (HFCs)2.7%
• 8415.20.00.90 Other2.7%

8415.81 Air conditioning machines; containing a motor driven fan, other than window or wall types, incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (reversible heat pumps)

• 8415.81.00.10 For use in civil aircraft4.5%
• Other
• 8415.81.00.91 Pre-charged with hydrofluorocarbons (HFCs)2.7%
• 8415.81.00.99 Other2.7%

8415.82 Air conditioning machines; containing a motor driven fan, other than window or wall types, incorporating a refrigerating unit

• 8415.82.00.10 For use in civil aircraft4.5%
• Other
• 8415.82.00.91 Pre-charged with hydrofluorocarbons (HFCs)2.7%
• 8415.82.00.99 Other2.7%

8415.83 Air conditioning machines; containing a motor driven fan, other than window or wall types, not incorporating a refrigerating unit

• 8415.83.00.10 For use in civil aircraft4.5%
• 8415.83.00.90 Other2.7%

8415.90 Air conditioning machines; with motor driven fan and elements for temperature control, parts thereof

• 8415.90.00.10 Of air conditioning machines of subheading Nos 8415 81, 8415 82 or 8415 83, for use in civil aircraft4.5%
• 8415.90.00.15 Electrically welded manifolds for the condenser in automotive air conditioning systems: consisting of a tube produced by stamping an aluminium strip and joining the edges by electric arc welding; containing internal baffles responsible for the proper flow of coolant; with a length of 190 mm or more, but not more than 460 mm; with a diameter of 9 mm or more, but not more than 42 mm; with a weight of 0,01 kg or more, but not more than 0,45 kg; whether or not having aluminium connection blocks; used in the production of air conditioning systems in vehicles of Chapter 872.7%
• 8415.90.00.45 Aluminium connecting block for automotive air conditioning systems: with a T6 hardening; equipped with round stubs with a circumferential outer groove; with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm; with a distance between holes of 15 mm or more but not more than 22 mm; with sockets designed for brazing or clamping; with mounting holes for M6 or M8 mounting screw, threaded or not; with a width of 5 mm or more but not more than 16 mm; for connecting a compressor, a condenser, an evaporator, a chiller and other lines2.7%
• 8415.90.00.60 Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with: extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm; a weight of 0,02 kg or more but not more than 0,25 kg2.7%
• 8415.90.00.91 Pre-charged with hydrofluorocarbons (HFCs)2.7%
• 8415.90.00.99 Other2.7%

8416 Furnace burners for liquid fuel, for pulverised solid fuel or for gas; mechanical grates, mechanical ash dischargers and similar appliances

8416.10 Furnaces; furnace burners, for liquid fuel

• 8416.10.10.00 Incorporating an automatic control device1.7%
• 8416.10.90.00 Other1.7%

8416.20 Furnaces; furnace burners, for pulverized solid fuel or gas, including combination burners

• 8416.20.10.00 Only for gas, monobloc, incorporating a ventilator and a control device1.7%
• Other
• 8416.20.20.00 Combination burners1.7%
• 8416.20.80.00 Other1.7%

8416.30 Furnace accessories; mechanical stokers, mechanical grates, mechanical ash dischargers and similar appliances

• 8416.30.00.00 Mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances1.7%

8416.90 Furnaces; parts of furnace burners, for liquid fuel, pulverized solid fuel or gas, mechanical stokers, grates, ash dischargers and the like

• 8416.90.00.00 Parts1.7%

8417 Furnaces and ovens; industrial or laboratory, including incinerators, non-electric

8417.10 Furnaces and ovens; non-electric, for the roasting, melting or other heat-treatment of ores, pyrites or of metals, for industrial or laboratory use

• 8417.10.00.00 Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals1.7%

8417.20 Ovens; non-electric, bakery ovens, including biscuit ovens

• 8417.20.10.00 Tunnel ovens1.7%
• 8417.20.90.00 Other1.7%

8417.80 Furnaces and ovens; including incinerators, non-electric, for industrial or laboratory use, n.e.c. in heading no. 8417

• 8417.80.30.00 Ovens and furnaces for firing ceramic products1.7%
• 8417.80.50.00 Ovens and furnaces for firing cement, glass or chemical products1.7%
• 8417.80.70.00 Other1.7%

8417.90 Furnaces and ovens; parts of non-electric furnaces and ovens (including incinerators), of industrial or laboratory use

• 8417.90.00.00 Parts1.7%

8418 Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air conditioning machines of heading no. 8415

8418.10 Refrigerators and freezers; combined refrigerator-freezers, fitted with separate external doors, electric or other

• Of a capacity exceeding 340 litres
• 8418.10.20.10 For use in civil aircraft4.5%
• Other
• 8418.10.20.91 Pre-charged with hydrofluorocarbons (HFCs)1.9%
• 8418.10.20.99 Other1.9%
• Other
• 8418.10.80.10 For use in civil aircraft4.5%
• Other
• 8418.10.80.91 Pre-charged with hydrofluorocarbons (HFCs)1.9%
• 8418.10.80.99 Other1.9%

8418.21 Refrigerators; for household use, compression-type, electric or other

• Of a capacity exceeding 340 litres
• 8418.21.10.10 Pre-charged with hydrofluorocarbons (HFCs)1.5%
• 8418.21.10.90 Other1.5%
• Other
• Table model
• 8418.21.51.10 Pre-charged with hydrofluorocarbons (HFCs)2.5%
• 8418.21.51.90 Other2.5%
• Building-in type
• 8418.21.59.10 Pre-charged with hydrofluorocarbons (HFCs)1.9%
• 8418.21.59.90 Other1.9%
• Other, of a capacity
• Not exceeding 250 litres
• 8418.21.91.10 Pre-charged with hydrofluorocarbons (HFCs)2.5%
• 8418.21.91.90 Other2.5%
• Exceeding 250 litres but not exceeding 340 litres
• 8418.21.99.10 Pre-charged with hydrofluorocarbons (HFCs)1.9%
• 8418.21.99.90 Other1.9%

8418.29 Refrigerators; household, electric or not, other than compression-type

• 8418.29.00.10 Pre-charged with hydrofluorocarbons (HFCs)2.2%
• 8418.29.00.90 Other2.2%

8418.30 Freezers; of the chest type, not exceeding 800l capacity

• Of a capacity not exceeding 400 litres
• 8418.30.20.10 For use in civil aircraft4.5%
• Other
• 8418.30.20.91 Pre-charged with hydrofluorocarbons (HFCs)2.2%
• 8418.30.20.99 Other2.2%
• Of a capacity exceeding 400 litres but not exceeding 800 litres
• 8418.30.80.10 For use in civil aircraft4.5%
• Other
• 8418.30.80.91 Pre-charged with hydrofluorocarbons (HFCs)2.2%
• 8418.30.80.99 Other2.2%

8418.40 Freezers; of the upright type, not exceeding 900l capacity

• Of a capacity not exceeding 250 litres
• 8418.40.20.10 For use in civil aircraft4.5%
• Other
• 8418.40.20.91 Pre-charged with hydrofluorocarbons (HFCs)2.2%
• 8418.40.20.99 Other2.2%
• Of a capacity exceeding 250 litres but not exceeding 900 litres
• 8418.40.80.10 For use in civil aircraft4.5%
• Other
• 8418.40.80.91 Pre-charged with hydrofluorocarbons (HFCs)2.2%
• 8418.40.80.99 Other2.2%

8418.50 Furniture incorporating refrigerating or freezing equipment; for storage and display, n.e.c. in item no. 8418.1, 8418.2, 8418.3 or 8418.4 (chests, cabinets, display counters, show-cases and the like)

• Refrigerated showcases and counters (incorporating a refrigerating unit or evaporator)
• For frozen food storage
• 8418.50.11.10 Pre-charged with hydrofluorocarbons (HFCs)2.2%
• 8418.50.11.90 Other2.2%
• Other
• 8418.50.19.10 Pre-charged with hydrofluorocarbons (HFCs)2.2%
• 8418.50.19.90 Other2.2%
• Other refrigerating furniture
• 8418.50.90.10 Pre-charged with hydrofluorocarbons (HFCs)2.2%
• 8418.50.90.90 Other2.2%

8418.61 Heat pumps; other than air conditioning machines of heading no. 8415

• 8418.61.00.10 For use in civil aircraft4.5%
• Other
• 8418.61.00.91 Pre-charged with hydrofluorocarbons (HFCs)2.2%
• 8418.61.00.99 Other2.2%

8418.69 Refrigerating or freezing equipment; n.e.c. in heading no. 8418

• 8418.69.00.10 For use in civil aircraft4.5%
• Other
• 8418.69.00.91 Pre-charged with hydrofluorocarbons (HFCs)2.2%
• 8418.69.00.99 Other2.2%

8418.91 Refrigerating or freezing equipment; parts, furniture designed to receive refrigerating or freezing equipment

• 8418.91.00.00 Furniture designed to receive refrigerating or freezing equipment2.2%

8418.99 Refrigerating or freezing equipment; parts thereof, other than furniture

• Evaporators and condensers, excluding those for refrigerators of the household type
• 8418.99.10.10 For use in certain types of aircraft2.2%
• Other
• 8418.99.10.81 Pre-charged with hydrofluorocarbons (HFCs)2.2%
• 8418.99.10.87 Other2.2%
• Other
• 8418.99.90.10 Of refrigerating equipment adapted to the air-conditioning system, for use in certain types of aircraft2.2%
• 8418.99.90.20 Aluminium connecting block for connecting to a condenser manifold in welding process: hardened to T6 or T5 temper; with a weight of not more than 150 g; with a length of 20 mm or more but not more than 150 mm; with a fixing rail in one piece2.2%
• 8418.99.90.30 Receiver dryer profile for connecting to a condenser manifold in welding process with: a braze flatness of not more than 0,2 mm; a weight of 100 g or more but not more than 600 g; a fixing rail in one piece2.2%
• 8418.99.90.50 Heat exchanger evaporator, used in domestic refrigerators and freezers and their combinations: with external dimensions of 362 mm x 244 mm x 60 mm or more but not more than 398,4 mm x 503 mm x 60 mm; with 229 mm to 307 mm aluminium radiator fins with external dimensions of 60 mm x 26,7 mm or more but not more than 60,2 mm x 27,3 mm; with an aluminium tube with an external diameter of 8,3 mm or more but not more than 8,5 mm; with not more than two heaters with a power of 40 W or more but not more than 140 W, equipped with cables with connectors; with or without two thermal fuses with a melting point of 77 °C, equipped with cables with connectors2.2%
• 8418.99.90.60 Condenser for refrigerators or refrigerators with freezers of the household type equipped at least with: a steel pipe with a diameter from 4,68 mm to 4,81 mm, a wall thickness from 0,52 mm to 0,65 mm; -26-30 pcs of horizontal pipe sections, each straight with a length from 450 mm to 455 mm, placed every 40 mm between each horizontal part: from 112 to 174 pcs welded steel rods with a diameter of 1,3 mm and a length of 1 002 mm or more but not more than 1 322 mm; -3 clips; -4 brackets welded between the rods2.2%
• 8418.99.90.70 Household appliances condenser, being a type of heat exchanger, made entirely of aluminium A3102, A3003, A4045 or A4343, consisting of two vertical pipes and arranged horizontally between them 16 parallel flat tubes with fins, with: one vertical pipe with inlet and outlet tubes; a width of 297 mm or more, but not more than 373 mm; a height of 154 mm or more, but not more than 158 mm; a depth of 17 mm or more, but not more than 23 mm; a flatness tolerance of less than 2 mm for the fin pack within the condenser core; a weight of 224 g or more, but not more than 283 g2.2%
• 8418.99.90.80 An evaporator being a type of heat exchanger, consisting of aluminium pipes with copper ends enclosed with aluminium radiators: measuring 337 x 237 x 17 mm or more, but not more than 868 x 399 x 78 mm; with a total weight of a set of 236 g or more, but not more than 1 750 g; with a fixed sensor; with or without noise absorber; with 2, 5 or 7 control and power connection pins terminated with sensor temperature type of socket, with or without heater and fuse type of socket; for use in the manufacture of products of subheadings 8418 10, 8418 21, 8418 402.2%
• Other
• 8418.99.90.91 Pre-charged with hydrofluorocarbons (HFCs)2.2%
• 8418.99.90.99 Other2.2%

8419 Machinery, plant (not domestic), or laboratory equipment; electrically heated or not, (excluding items in 85.14) for the treatment of materials by a process involving change of temperature; including instantaneous or non electric storage water heaters

8419.11 Heaters; instantaneous gas water heaters, for domestic or other purposes

• 8419.11.00.00 Instantaneous gas water heaters2.6%

8419.12 Heaters; solar water heaters, non-electric

• 8419.12.00.00 Solar water heaters2.6%

8419.19 Heaters; instantaneous or storage water heaters, non-electric, (other than instantaneous gas or solar water heaters)

• 8419.19.00.00 Other2.6%

8419.20 Sterilizers; for medical, surgical or laboratory use, not used for domestic purposes

• 8419.20.00.00 Medical, surgical or laboratory sterilisersFree

8419.33 Dryers; lyophilisation apparatus, freeze drying units and spray dryers, not used for domestic purposes

• 8419.33.00.00 Lyophilisation apparatus, freeze drying units and spray dryers1.7%

8419.34 Dryers; for agricultural products, not used for domestic purposes

• 8419.34.00.00 Other, for agricultural products1.7%

8419.35 Dryers; for wood, paper pulp, paper or paperboard, not used for domestic purposes

• 8419.35.00.00 Other, for wood, paper pulp, paper or paperboard1.7%

8419.39 Dryers; for products n.e.c. in heading no. 8419, not used for domestic purposes

• 8419.39.00.00 Other1.7%

8419.40 Distilling or rectifying plant; not used for domestic purposes

• 8419.40.00.00 Distilling or rectifying plant1.7%

8419.50 Heat exchange units; not used for domestic purposes

• 8419.50.20.00 Heat exchange units made of fluoropolymers and with inlet and outlet tube bores with inside diameters measuring 3 cm or lessFree
• Other
• 8419.50.80.10 For use in civil aircraft4.5%
• 8419.50.80.30 Aluminium heat exchanger for gas boilers designed for heat transfer: with a height of 100mm or more, but not more than 150mm; with a width of 235mm or more, but not more than 300mm; with a length of 240mm or more, but not more than 300mm; for a power output of 25kW or more, but not more than 35kW; with a weight of 8Kg or more, but not more than 10Kg1.7%
• 8419.50.80.90 Other1.7%

8419.60 Machinery; for liquefying air or gas, not used for domestic purposes

• 8419.60.00.00 Machinery for liquefying air or other gases1.7%

8419.81 Machinery, plant and equipment; for making hot drinks, for cooking or heating food

• Percolators and other appliances for making coffee and other hot drinks
• 8419.81.20.10 For use in civil aircraft4.5%
• 8419.81.20.90 Other2.7%
• Other
• 8419.81.80.10 For use in civil aircraft4.5%
• 8419.81.80.90 Other1.7%

8419.89 Machinery, plant and laboratory equipment; for treating materials by change of temperature, other than for making hot drinks or cooking or heating food

• 8419.89.10.00 Cooling towers and similar plant for direct cooling (without a separating wall) by means of recirculated water1.7%
• 8419.89.30.00 Vacuum-vapour plant for the deposition of metal2.4%
• 8419.89.98.00 Other2.4%

8419.90 Machinery, plant and laboratory equipment; parts of equipment for treating materials by a process involving a change of temperature

• 8419.90.15.00 Of sterilisers of subheading 8419 20 00Free
• Other
• 8419.90.85.10 Of heat exchange units, for use in civil aircraft4.5%
• 8419.90.85.40 Silicone or plastic keyboards, comprising: parts of common metal, and whether or not comprising parts of plastic; epoxy resin reinforced with fiberglass or wood; whether or not printed or surface-treated; with or without electrical conductors; with or without a membrane bonded to the keyboard; with or without mono or multilayer protective film1.7%
• 8419.90.85.90 Other1.7%

8420 Machines; calendering or other rolling machines, for other than metal or glass and cylinders therefor

8420.10 Machines; calendering or other rolling machines, for other than metal or glass

• 8420.10.10.00 Of a kind used in the textile industry1.7%
• 8420.10.30.00 Of a kind used in the paper industry1.7%
• Other
• 8420.10.81.00 Roll laminators of a kind used solely or principally for the manufacture of printed circuit substrates or printed circuitsFree
• 8420.10.89.00 Other1.7%

8420.91 Machines; parts, cylinders for calendering or other rolling machines, for other than metal or glass

• 8420.91.10.00 Of cast iron1.7%
• 8420.91.80.00 Other2.2%

8420.99 Machines; parts, (other than cylinders), for calendering or other rolling machines, for other than metal or glass

• 8420.99.00.00 Other2.2%

8421 Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus for liquids or gases

8421.11 Centrifuges; cream separators

• 8421.11.00.00 Cream separators2.2%

8421.12 Centrifuges; clothes-dryers

• 8421.12.00.00 Clothes dryers2.7%

8421.19 Centrifuges; n.e.c. in heading no. 8421, including centrifugal dryers (but not clothes-dryers)

• 8421.19.20.00 Centrifuges of a kind used in laboratories1.5%
• 8421.19.70.00 OtherFree

8421.21 Machinery; for filtering or purifying water

• 8421.21.00.10 For use in civil aircraft—
• 8421.21.00.90 Other1.7%

8421.22 Machinery; for filtering or purifying beverages other than water

• 8421.22.00.00 For filtering or purifying beverages other than water1.7%

8421.23 Machinery; filtering or purifying machinery, oil or petrol filters for internal combustion engines

• 8421.23.00.10 For use in civil aircraft—
• 8421.23.00.90 Other1.7%

8421.29 Machinery; for filtering or purifying liquids, n.e.c. in item no. 8421.2

• 8421.29.20.00 Made of fluoropolymers and with filter or purifier membrane thickness not exceeding 140 micronsFree
• Other
• 8421.29.80.10 For use in civil aircraft—
• 8421.29.80.90 Other1.7%

8421.31 Machinery; intake air filters for internal combustion engines

• 8421.31.00.10 For use in civil aircraft—
• 8421.31.00.90 Other1.7%

8421.32 Machinery; catalytic converters or particulate filters, whether or not combined, for purifying or filtering exhaust gases from internal combustion engines

• 8421.32.00.10 For use in civil aircraft—
• 8421.32.00.90 Other1.7%

8421.39 Machinery; for filtering or purifying gases, other than intake air filters, catalytic converters or particulate filters for internal combustion engines

• 8421.39.15.00 With stainless steel housing, and with inlet and outlet tube bores with inside diameters not exceeding 1,3 cmFree
• Other
• Machinery and apparatus for filtering or purifying air
• 8421.39.25.10 For use in civil aircraft—
• 8421.39.25.90 Other1.7%
• Machinery and apparatus for filtering or purifying other gases
• By a catalytic process
• 8421.39.35.10 For use in civil aircraft—
• 8421.39.35.90 Other1.7%
• Other
• 8421.39.85.10 For use in civil aircraft—
• 8421.39.85.90 Other1.7%

8421.91 Centrifuges; parts thereof, including parts for centrifugal dryers

• 8421.91.00.00 Of centrifuges, including centrifugal dryers1.7%

8421.99 Machinery; parts for filtering or purifying liquids or gases

• 8421.99.10.00 Parts of machinery and apparatus of subheadings 8421 29 20 or 8421 39 15Free
• Other
• 8421.99.90.10 Of filtering or purification machinery and apparatus for liquids or gases, for use in certain types of aircrafts1.7%
• 8421.99.90.92 Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more1.7%
• 8421.99.90.99 Other1.7%

8422 Dish washing machines; machinery for cleaning, drying, filling, closing, sealing, capsuling or labelling bottles, cans, boxes, bags, etc, machinery for aerating beverages

8422.11 Dish washing machines; of the household type

• 8422.11.00.00 Of the household type2.7%

8422.19 Dish washing machines; of other than household type

• 8422.19.00.00 Other1.7%

8422.20 Machinery; for cleaning or drying bottles or other containers

• 8422.20.00.00 Machinery for cleaning or drying bottles or other containers1.7%

8422.30 Machinery; for filling, closing, sealing, capsuling or labelling bottles, cans, bags or other containers, machinery for aerating beverages

• 8422.30.00.00 Machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; machinery for aerating beverages1.7%

8422.40 Machinery; for packing or wrapping

• 8422.40.00.00 Other packing or wrapping machinery (including heat-shrink wrapping machinery)1.7%

8422.90 Machinery; parts of machinery of heading no. 8422

• 8422.90.10.00 Of dishwashing machines1.7%
• 8422.90.90.00 Other1.7%

8423 Weighing machines; excluding balances of a sensitivity of 5cg or better, including weight operated counting or checking machines and weights of all kinds

8423.10 Weighing machines; personal (including baby scales) and household scales

• 8423.10.10.00 Household scales1.7%
• 8423.10.90.00 Other1.7%

8423.20 Weighing machines; scales for continuous weighing of goods on conveyors

• 8423.20.10.00 Using electronic means for gauging weightFree
• 8423.20.90.00 Other1.7%

8423.30 Weighing machines; constant weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales

• 8423.30.10.00 Using electronic means for gauging weightFree
• 8423.30.90.00 Other1.7%

8423.81 Weighing machines; other than personal, conveyor or constant weight scales, having a maximum weighing capacity not exceeding 30kg (excluding balances of a sensitivity of 5cg or better)

• Using electronic means for gauging weight
• 8423.81.21.00 Check weighers and automatic control machines operating by reference to a pre-determined weightFree
• 8423.81.23.00 Machinery for weighing and labelling pre-packaged goodsFree
• 8423.81.25.00 Shop scalesFree
• 8423.81.29.00 OtherFree
• 8423.81.80.00 Other1.7%

8423.82 Weighing machines; other than personal, conveyor or constant weight scales, having a maximum weighing capacity exceeding 30kg but not exceeding 5000kg

• 8423.82.20.00 Using electronic means for gauging weight, excluding machines for weighing motor vehiclesFree
• Other
• 8423.82.81.00 Check weighers and automatic control machines operating by reference to a pre-determined weight1.7%
• 8423.82.89.00 Other1.7%

8423.89 Weighing machines; other than personal, conveyor or constant weight scales, having a maximum weighing capacity exceeding 5000kg

• 8423.89.20.00 Using electronic means for gauging weightFree
• 8423.89.80.00 Other1.7%

8423.90 Weighing machines; weights of all kinds, parts of weighing machinery

• 8423.90.10.00 Parts of weighing machinery of subheadings 8423 20 10, 8423 30 10, 8423 81 21, 8423 81 23, 8423 81 25, 8423 81 29, 8423 82 20 or 8423 89 20Free
• 8423.90.90.00 Other1.7%

8424 Mechanical appliances for projecting, dispersing or spraying liquids or powders; fire extinguishers, spray guns, steam, sand blasting machines

8424.10 Fire extinguishers; whether or not charged

• For use in civil aircraft
• Not charged fire extinguishers
• 8424.10.00.11 High-pressure seamless cylinders for compressed or liquefied gas, of steel, of all diameters and volume capacities, whether or not threaded, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders’ fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle—
• 8424.10.00.15 Other—
• 8424.10.00.19 Other—
• Other
• Not charged fire extinguishers
• 8424.10.00.21 High-pressure seamless cylinders for compressed or liquefied gas, of steel, of all diameters and volume capacities, whether or not threaded, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders’ fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle1.7%
• 8424.10.00.29 Other1.7%
• 8424.10.00.80 Other1.7%

8424.20 Spray guns and similar appliances

• 8424.20.00.00 Spray guns and similar appliances1.7%

8424.30 Mechanical appliances; steam or sand blasting machines and similar jet projecting machines

• Water cleaning appliances, with built-in motor
• 8424.30.01.00 With heating device1.7%
• 8424.30.08.00 Other1.7%
• Other machines
• 8424.30.10.00 Compressed air operated1.7%
• 8424.30.90.00 Other1.7%

8424.41 Mechanical appliances; agricultural or horticultural sprayers; portable sprayers

• 8424.41.00.00 Portable sprayers1.7%

8424.49 Mechanical appliances; agricultural or horticultural sprayers; other than portable sprayers

• 8424.49.10.00 Sprayers and powder distributors designed to be mounted on or drawn by tractors1.7%
• 8424.49.90.00 Other1.7%

8424.82 Mechanical appliances; agricultural or horticultural, n.e.c. in heading 8424

• 8424.82.10.00 Watering appliances1.7%
• 8424.82.90.00 Other1.7%

8424.89 Mechanical appliances; for projecting, dispersing or spraying liquids or powders, for other than agricultural or horticultural use, whether or not hand-operated

• 8424.89.40.00 Mechanical appliances for projecting, dispersing, or spraying of a kind used solely or principally for the manufacture of printed circuits or printed circuit assembliesFree
• 8424.89.70.00 Other1.7%

8424.90 Mechanical appliances; parts of machines projecting, dispersing or spraying liquids or powders, whether or not hand-operated

• 8424.90.20.00 Parts of mechanical appliances of subheading 8424 89 40Free
• Other
• 8424.90.80.20 Of fire extinguishers, for use in certain types of aircraft1.7%
• 8424.90.80.60 High-pressure seamless cylinders for compressed or liquefied gas, of steel, of all diameters and volume capacities, whether or not threaded, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders’ fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle1.7%
• 8424.90.80.80 Other1.7%

8425 Pulley tackle and hoists other than skip hoists; winches and capstans; jacks

8425.11 Pulley tackle and hoists; powered by an electric motor (excluding skip hoists or hoists of a kind used for raising vehicles)

• 8425.11.00.00 Powered by electric motorFree

8425.19 Pulley tackle and hoists; not powered by an electric motor (excluding skip hoists or hoists of a kind used for raising vehicles)

• 8425.19.00.00 OtherFree

8425.31 Winches; capstans; powered by an electric motor

• 8425.31.00.00 Powered by electric motorFree

8425.39 Winches; capstans; not powered by an electric motor

• 8425.39.00.00 OtherFree

8425.41 Jacks; built-in jacking systems of a type used in garages, for raising vehicles

• 8425.41.00.00 Built-in jacking systems of a type used in garagesFree

8425.42 Jacks and hoists; hydraulic, of a kind used for raising vehicles

• 8425.42.00.00 Other jacks and hoists, hydraulicFree

8425.49 Jacks and hoists; (other than hydraulic), of a kind used for raising vehicles

• 8425.49.00.00 OtherFree

8426 Derricks, cranes, including cable cranes, mobile lifting frames, straddle carriers and works trucks fitted with a crane

8426.11 Cranes; overhead travelling cranes on fixed support

• 8426.11.00.00 Overhead travelling cranes on fixed supportFree

8426.12 Cranes; mobile lifting frames on tyres and straddle carriers

• 8426.12.00.00 Mobile lifting frames on tyres and straddle carriersFree

8426.19 Cranes; transporter, gantry and bridge cranes

• 8426.19.00.00 OtherFree

8426.20 Cranes; tower cranes

• 8426.20.00.00 Tower cranesFree

8426.30 Cranes; portal or pedestal jib cranes

• 8426.30.00.00 Portal or pedestal jib cranesFree

8426.41 Cranes; self-propelled derricks and cranes, on tyres, n.e.c. in heading no. 8426

• 8426.41.00.00 On tyresFree

8426.49 Cranes; self-propelled derricks and cranes, not on tyres, n.e.c. in heading no. 8426

• 8426.49.00.11 New mobile cranes, meaning cable-controlled or hydraulic-powered cranes, designed for the lifting, lowering and horizontal movement of materials on land, with a lifting capacity of at least 30 tonnes, mounted on self-propelled vehicles, regardless of their propulsion systemmobile cranesFree
• 8426.49.00.90 OtherFree

8426.91 Cranes and derricks; designed for mounting on road vehicles

• 8426.91.10.00 Hydraulic cranes designed for the loading and unloading of the vehicleFree
• 8426.91.90.00 OtherFree

8426.99 Cranes and derricks; for other than mounting on road vehicles, n.e.c. in heading no. 8426

• 8426.99.00.00 OtherFree

8427 Fork-lift and other works trucks; fitted with lifting or handling equipment

8427.10 Fork-lift and other works trucks; fitted with lifting or handling equipment, self-propelled by electric motor

• With a lifting height of 1 m or more
• 8427.10.10.10 Mobile access equipment designed for the lifting of persons, with a maximum working height of 6 meters or more4.5%
• 8427.10.10.90 Other4.5%
• 8427.10.90.00 Other4.5%

8427.20 Fork-lift and other works trucks; fitted with lifting or handling equipment, self-propelled by other than electric motor

• With a lifting height of 1 m or more
• 8427.20.11.00 Fork-lift and other stacking trucks, for rough terrain4.5%
• Other
• 8427.20.19.10 Mobile access equipment designed for the lifting of persons, with a maximum working height of 6 meters or more4.5%
• 8427.20.19.90 Other4.5%
• 8427.20.90.00 Other4.5%

8427.90 Fork-lift and other works trucks; fitted with lifting or handling equipment, not self-propelled

• Hand pallet trucks
• 8427.90.00.11 Consigned from Thailand4%
• 8427.90.00.19 Other4%
• 8427.90.00.30 Hand pallet trucks with a so-called “weight indication system” consisting of a weighing mechanism not integrated in the chassis, that is to say not integrated in the forks4%
• 8427.90.00.80 Other4%

8428 Lifting, handling, loading or unloading machinery; n.e.c. in heading no. 8425, 8426 or 8427 (e.g. lifts, escalators, conveyors, teleferics)

8428.10 Lifts and skip hoists

• 8428.10.20.00 Electrically operatedFree
• 8428.10.80.00 OtherFree

8428.20 Elevators and conveyors; pneumatic

• 8428.20.20.00 For bulk materialsFree
• 8428.20.80.00 OtherFree

8428.31 Elevators and conveyors; continuous-action, for goods and materials, specially designed for underground use, n.e.c. in item no. 8428.20

• 8428.31.00.00 Specially designed for underground useFree

8428.32 Elevators and conveyors; continuous-action, for goods or materials, bucket type, n.e.c. in item no. 8428.20 or 8428.31

• 8428.32.00.00 Other, bucket typeFree

8428.33 Elevators and conveyors; continuous-action, for goods or materials, belt type, n.e.c. in item no. 8428.20 or 8428.31

• 8428.33.00.00 Other, belt typeFree

8428.39 Elevators and conveyors; continuous-action, for goods or materials, n.e.c. in item no. 8428.20, 8428.31, 8428.32 or 8428.33

• 8428.39.20.00 Roller conveyorsFree
• 8428.39.90.00 OtherFree

8428.40 Escalators and moving walkways

• 8428.40.00.00 Escalators and moving walkwaysFree

8428.60 Teleferics, chair-lifts, ski-draglines, traction mechanisms for funiculars

• 8428.60.00.00 Teleferics, chairlifts, ski-draglines; traction mechanisms for funicularsFree

8428.70 Industrial robots

• 8428.70.00.00 Industrial robotsFree

8428.90 Lifting, handling, loading or unloading machinery; n.e.c. in heading no. 8425, 8426, 8427 or 8428

• Loaders specially designed for use in agriculture
• 8428.90.71.00 Designed for attachment to agricultural tractorsFree
• 8428.90.79.00 OtherFree
• Other
• 8428.90.90.20 Mobile access equipment designed for the lifting of persons, self-propelled, with a maximum working height of 6 meters or moreFree
• 8428.90.90.80 OtherFree

8429 Bulldozers, graders, levellers, scrapers, angledozers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers, self-propelled

8429.11 Bulldozers and angledozers; self-propelled, track laying

• 8429.11.00.00 Track layingFree

8429.19 Bulldozers and angledozers; self-propelled, other than track laying

• 8429.19.00.00 OtherFree

8429.20 Graders and levellers

• 8429.20.00.00 Graders and levellersFree

8429.30 Scrapers; self-propelled

• 8429.30.00.00 ScrapersFree

8429.40 Tamping machines and road rollers; self-propelled

• Roadrollers
• 8429.40.10.00 VibratoryFree
• 8429.40.30.00 OtherFree
• 8429.40.90.00 Tamping machinesFree

8429.51 Front-end shovel loaders

• 8429.51.10.00 Loaders specially designed for underground useFree
• Other
• 8429.51.91.00 Crawler shovel loadersFree
• 8429.51.99.00 OtherFree

8429.52 Mechanical shovels, excavators and shovel loaders; with a 360 degree revolving super structure

• 8429.52.10.00 Track-laying excavatorsFree
• 8429.52.90.00 OtherFree

8429.59 Mechanical shovels, excavators and shovel loaders; n.e.c. in item no. 8429.50

• 8429.59.00.00 OtherFree

8430 Moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals, or ores; pile drivers and extractors; snow ploughs and snow blowers

8430.10 Pile-drivers and pile-extractors

• 8430.10.00.00 Piledrivers and pile extractorsFree

8430.20 Snow-ploughs and snow-blowers

• 8430.20.00.00 Snowploughs and snowblowersFree

8430.31 Coal or rock cutters and tunnelling machinery; self-propelled

• 8430.31.00.00 Self-propelledFree

8430.39 Coal or rock cutters and tunnelling machinery; not self-propelled

• 8430.39.00.00 OtherFree

8430.41 Boring or sinking machinery; self-propelled, n.e.c. in heading no. 8430

• 8430.41.00.00 Self-propelledFree

8430.49 Boring and sinking machinery; not self-propelled

• 8430.49.00.00 OtherFree

8430.50 Machinery; for handling earth, minerals or ores, self-propelled, n.e.c. in heading no. 8430

• 8430.50.00.00 Other machinery, self-propelledFree

8430.61 Machinery; for tamping or compacting, not self-propelled

• 8430.61.00.00 Tamping or compacting machineryFree

8430.69 Machinery; for moving, levelling, scraping, grading, excavating earth minerals or ores; not self propelled n.e.c in 84.30

• 8430.69.00.00 OtherFree

8431 Machinery parts; used solely or principally with the machinery of heading no. 8425 to 8430

8431.10 Machinery; parts of the machinery of heading no. 8425

• 8431.10.00.00 Of machinery of heading 8425Free

8431.20 Machinery; parts of the machinery of heading no. 8427

• Chassis and hydraulics for hand pallet trucks
• 8431.20.00.11 Consigned from Thailand4%
• 8431.20.00.19 Other4%
• 8431.20.00.40 Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 84274%
• 8431.20.00.50 Chassis and hydraulics, with a so-called ‘weight indication system’ consisting of a weighing mechanism not integrated in the chassis, that is to say not integrated in the forks4%
• 8431.20.00.60 Pre-assembled or ready-to-assemble sections of self-propelled mobile access equipment designed for the lifting of persons, excluding individual components when presented separately4%
• 8431.20.00.70 Container spreader for lifting empty 20' and 40' cargo containers: without an integrated carriage; suitable for machines with a load capacity of not more than 11 000 kg; designed to carry one or two containers at a time; with a top or side mounting; with an anti-corrosion layer coated; with a weight of 3 200 kg or more but not more than 4 000 kg; for use in the manufacture of self-propelled container handlers4%
• 8431.20.00.80 Other4%

8431.31 Lifts, skip hoists or escalators; parts thereof

• 8431.31.00.00 Of lifts, skip hoists or escalatorsFree

8431.39 Machinery; parts of the machinery of heading no. 8428, (other than lifts, skip hoists or escalators)

• 8431.39.00.10 Pre-assembled or ready-to-assemble sections of self-propelled mobile access equipment designed for the lifting of persons, excluding individual components when presented separatelyFree
• Certain types of steel shoes, with or without rubber pads attached thereto, whether or not assembled in a track chain, with a maximum length of 3000 mm, used on conveyor belts
• Not assembled
• 8431.39.00.15 Steel track shoes exceeding a length of 380mm, height of 140 mm and weight of 118kg, without grousers of any shape with the dimension 1 mm or moreFree
• 8431.39.00.22 OtherFree
• Assembled
• 8431.39.00.27 Steel track shoes exceeding a length of 380mm, height of 140 mm and weight of 118kg, without grousers of any shape with the dimension 1 mm or moreFree
• 8431.39.00.39 OtherFree
• 8431.39.00.90 OtherFree

8431.41 Machinery parts; buckets, shovels, grabs and grips, for the machinery of heading no. 8426 and 8430

• 8431.41.00.11 For new mobile cranesFree
• 8431.41.00.90 OtherFree

8431.42 Machinery parts; bulldozer or angledozer blades

• 8431.42.00.00 Bulldozer or angledozer bladesFree

8431.43 Boring or sinking machinery; parts for boring or sinking machinery of subheading 8430.41 or 8430.49

• 8431.43.00.11 Specific pre-assembled or ready-to assemble sections for new mobile cranesFree
• 8431.43.00.90 OtherFree

8431.49 Machinery; parts of machines handling earth, minerals or ores and n.e.c. in heading no. 8431

• Of cast iron or cast steel
• Certain types of steel shoes, with or without rubber pads attached thereto, whether or not assembled in a track chain, with a maximum length of 3000 mm
• Not assembled
• 8431.49.20.05 Steel track shoes exceeding a length of 380mm, height of 140 mm and weight of 118kg, without grousers of any shape with the dimension 1 mm or moreFree
• 8431.49.20.10 OtherFree
• Assembled
• 8431.49.20.20 Steel track shoes exceeding a length of 380mm, height of 140 mm and weight of 118kg, without grousers of any shape with the dimension 1 mm or moreFree
• 8431.49.20.29 OtherFree
• 8431.49.20.50 Specific pre-assembled or ready-to assemble sections for new mobile cranesFree
• 8431.49.20.90 OtherFree
• Other
• Certain types of steel shoes, with or without rubber pads attached thereto, whether or not assembled in a track chain, with a maximum length of 3000 mm
• Not asssembled
• 8431.49.80.05 Steel track shoes exceeding a length of 380mm, height of 140 mm and weight of 118kg, without grousers of any shape with the dimension 1 mm or moreFree
• 8431.49.80.10 OtherFree
• Asssembled
• 8431.49.80.20 Steel track shoes exceeding a length of 380mm, height of 140 mm and weight of 118kg, without grousers of any shape with the dimension 1 mm or moreFree
• 8431.49.80.29 OtherFree
• 8431.49.80.50 Specific pre-assembled or ready-to assemble sections for new mobile cranesFree
• 8431.49.80.90 OtherFree

8432 Agricultural, horticultural or forestry machinery for soil preparation or cultivation; lawn or sports-ground rollers

8432.10 Ploughs; for soil preparation

• 8432.10.00.00 PloughsFree

8432.21 Harrows; disc harrows

• 8432.21.00.00 Disc harrowsFree

8432.29 Harrows; (excluding disc), scarifiers, cultivators, weeders and hoes

• 8432.29.10.00 Scarifiers and cultivatorsFree
• 8432.29.30.00 HarrowsFree
• 8432.29.50.00 RotovatorsFree
• 8432.29.90.00 OtherFree

8432.31 Seeders, planters and transplanters; no-till direct seeders, planters and transplanters

• 8432.31.00.00 No-till direct seeders, planters and transplantersFree

8432.39 Seeders, planters and transplanters; other than no-till direct seeders, planters and transplanters

• Seeders
• 8432.39.11.00 Central driven precision spacing seedersFree
• 8432.39.19.00 OtherFree
• 8432.39.90.00 Planters and transplantersFree

8432.41 Spreaders and distributors; for manure and fertilizers, for agricultural, horticultural or forestry use; manure spreaders

• 8432.41.00.00 Manure spreadersFree

8432.42 Spreaders and distributors; for manure and fertilizers, for agricultural, horticultural or forestry use; fertiliser distributors

• 8432.42.00.00 Fertiliser distributorsFree

8432.80 Rollers; for lawns or sports-grounds

• 8432.80.00.00 Other machineryFree

8432.90 Machinery; parts of machinery for soil preparation or cultivation or for rollers for lawns or sports-grounds

• 8432.90.00.00 PartsFree

8433 Harvesting and threshing machinery, straw and fodder balers, grass or hay mowers; machines for cleaning, sorting or grading eggs, fruit or other agricultural produce, other than machinery of heading no 8437

8433.11 Mowers; lawn, parks or sports-grounds, powered, with the cutting device rotating in a horizontal plane

• Electric
• 8433.11.10.10 Electric robot mowers, capable of cutting grass (for example, in lawns, parks and sports grounds), without direct human control, whether or not including the secondary equipment necessary to their functioning (a charging station and, in most cases, ancillary materials or equipment necessary for the proper navigation of the robot lawn mower, e.g., a boundary wire or a wireless alternative thereto).Free
• 8433.11.10.90 OtherFree
• Other
• Self-propelled
• 8433.11.51.00 With a seatFree
• 8433.11.59.00 OtherFree
• 8433.11.90.00 OtherFree

8433.19 Mowers; for lawns, parks or sports-grounds, other than with the cutting device rotating in a horizontal plane

• With motor
• 8433.19.10.00 ElectricFree
• Other
• Self-propelled
• 8433.19.51.00 With a seatFree
• 8433.19.59.00 OtherFree
• 8433.19.70.00 OtherFree
• 8433.19.90.00 Without motorFree

8433.20 Mowers; n.e.c. in item no. 8433.1 (including cutter bars for tractor mounting)

• 8433.20.10.00 With motorFree
• Other
• 8433.20.50.00 Designed to be carried on or hauled by a tractorFree
• 8433.20.90.00 OtherFree

8433.30 Haymaking machinery

• 8433.30.00.00 Other haymaking machineryFree

8433.40 Balers; straw or fodder balers, including pick-up balers

• 8433.40.00.00 Straw or fodder balers, including pick-up balersFree

8433.51 Combine harvester-threshers

• 8433.51.00.00 Combine harvester-threshersFree

8433.52 Threshing machinery; other than combine harvester-threshers

• 8433.52.00.00 Other threshing machineryFree

8433.53 Harvesting machinery; for roots or tubers

• 8433.53.10.00 Potato diggers and potato harvestersFree
• 8433.53.30.00 Beet-topping machines and beet harvestersFree
• 8433.53.90.00 OtherFree

8433.59 Harvesting machinery; n.e.c. in heading no. 8433

• Forage harvesters
• 8433.59.11.00 Self-propelledFree
• 8433.59.19.00 OtherFree
• 8433.59.85.00 OtherFree

8433.60 Machines; for cleaning, sorting or grading eggs, fruit or other agricultural produce

• 8433.60.00.00 Machines for cleaning, sorting or grading eggs, fruit or other agricultural produceFree

8433.90 Harvesting machinery; parts, including parts of threshing machinery, straw or fodder balers and grass or hay mowers

• 8433.90.00.00 PartsFree

8434 Milking machines and dairy machinery

8434.10 Milking machines

• 8434.10.00.00 Milking machinesFree

8434.20 Dairy machinery

• 8434.20.00.00 Dairy machineryFree

8434.90 Milking machines and dairy machinery; parts thereof

• 8434.90.00.00 PartsFree

8435 Presses, crushers and similar machinery; used in the manufacture of wine, cider, fruit juices or similar beverages

8435.10 Presses, crushers and similar machinery; used in the manufacture of wine, cider, fruit juices or similar beverages

• 8435.10.00.00 Machinery1.7%

8435.90 Presses, crushers and similar machinery; parts, used in the manufacture of wine, cider, fruit juices or similar beverages

• 8435.90.00.00 Parts1.7%

8436 Agricultural, horticultural, forestry, poultry-keeping, bee-keeping machinery; including germination plant fitted with mechanical or thermal equipment; poultry incubators and brooders

8436.10 Machinery; for preparing animal feeding stuffs

• 8436.10.00.00 Machinery for preparing animal feedingstuffs1.7%

8436.21 Poultry incubators and brooders

• 8436.21.00.00 Poultry incubators and brooders1.7%

8436.29 Poultry-keeping machinery; other than incubators and brooders

• 8436.29.00.00 Other1.7%

8436.80 Machinery; for agricultural, horticultural or forestry use and n.e.c. in heading no. 8436

• 8436.80.10.00 Forestry machinery1.7%
• 8436.80.90.00 Other1.7%

8436.91 Machinery; parts of poultry-keeping machinery or poultry incubators and brooders

• 8436.91.00.00 Of poultry-keeping machinery or poultry incubators and brooders1.7%

8436.99 Machinery; parts of that machinery for agricultural, horticultural or forestry use n.e.c. in heading no. 8436

• 8436.99.00.10 Part containing: a single-phase AC motor; an epicyclic gearing; a cutter blade; and whether or not containing: a capacitor; a part fitted with a threaded bolt; for use in the manufacture of garden shredders1.7%
• 8436.99.00.90 Other1.7%

8437 Machines for cleaning, sorting, grading seed, grain, dried leguminous vegetables; machinery used in the milling industry for the working of cereals or dried leguminous vegetables, not farm type machinery

8437.10 Machines; for cleaning, sorting or grading seed, grain or dried leguminous vegetables

• 8437.10.00.00 Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables1.7%

8437.80 Machinery; for use in the milling industry or for the working of cereals or dried leguminous vegetables, other than farm-type machinery

• 8437.80.00.00 Other machinery1.7%

8437.90 Machines; parts of those for cleaning, sorting or grading seed, grain or dried leguminous vegetables or for milling or working cereals or dried leguminous vegetables (not farm-type machinery)

• 8437.90.00.00 Parts1.7%

8438 Machinery n.e.c. in this chapter, for the industrial preparation or manufacture of food or drink; other than machinery for extraction or preparation of animal or fixed vegetable or microbial fats or oils

8438.10 Machinery; industrial, for bakery and for the manufacture of macaroni, spaghetti or similar products

• 8438.10.10.00 Bakery machinery1.7%
• 8438.10.90.00 Machinery for the manufacture of macaroni, spaghetti or similar products1.7%

8438.20 Machinery; industrial, for the manufacture of confectionery, cocoa or chocolate

• 8438.20.00.00 Machinery for the manufacture of confectionery, cocoa or chocolate1.7%

8438.30 Machinery; industrial, for sugar manufacture

• 8438.30.00.00 Machinery for sugar manufacture1.7%

8438.40 Machinery; industrial, brewery machinery

• 8438.40.00.00 Brewery machinery1.7%

8438.50 Machinery; industrial, for the preparation of meat or poultry

• 8438.50.00.00 Machinery for the preparation of meat or poultry1.7%

8438.60 Machinery; industrial, for the preparation of fruits, nuts or vegetables

• 8438.60.00.00 Machinery for the preparation of fruits, nuts or vegetables1.7%

8438.80 Machinery; used in the industrial preparation or manufacture of food or drink, n.e.c. in heading no. 8438

• 8438.80.10.00 For the preparation of tea or coffee1.7%
• Other
• 8438.80.91.00 For the preparation or manufacture of drink1.7%
• 8438.80.99.00 Other1.7%

8438.90 Machinery; parts of those machines used in the industrial preparation or manufacture of food or drink

• 8438.90.00.00 Parts1.7%

8439 Machinery; for making pulp of fibrous cellulosic material, or for making or finishing paper or paperboard

8439.10 Machinery; for making pulp of fibrous cellulosic material

• 8439.10.00.00 Machinery for making pulp of fibrous cellulosic material1.7%

8439.20 Machinery; for making paper or paperboard

• 8439.20.00.00 Machinery for making paper or paperboard1.7%

8439.30 Machinery; for finishing paper or paperboard

• 8439.30.00.00 Machinery for finishing paper or paperboard1.7%

8439.91 Machinery; parts of machinery for making pulp of fibrous cellulosic material

• 8439.91.00.00 Of machinery for making pulp of fibrous cellulosic material1.7%

8439.99 Machinery; parts of machinery for making or finishing paper or paperboard

• 8439.99.00.10 Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3 000 mm or more and an external diameter of 550 mm or more1.7%
• 8439.99.00.90 Other1.7%

8440 Book-binding machinery; including book-sewing machines

8440.10 Book-binding machinery; including book-sewing machines

• 8440.10.10.00 Folding machines1.7%
• 8440.10.20.00 Collating machines and gathering machines1.7%
• 8440.10.30.00 Sewing, wire stitching and stapling machines1.7%
• 8440.10.40.00 Unsewn (perfect) binding machines1.7%
• 8440.10.90.00 Other1.7%

8440.90 Book-binding machinery; including book-sewing machines, parts thereof

• 8440.90.00.00 Parts1.7%

8441 Machines; for making up paper pulp, paper or paperboard, including cutting machines of all kinds

8441.10 Machines; cutting, of all kinds, for making up paper pulp, paper or paperboard

• 8441.10.10.00 Combined reel slitting and re-reeling machines1.7%
• 8441.10.20.00 Other slitting and cross-cutting machines1.7%
• 8441.10.30.00 Guillotines1.7%
• 8441.10.70.00 Other1.7%

8441.20 Machines; for making bags, sacks or envelopes of paper pulp, paper or paperboard

• 8441.20.00.00 Machines for making bags, sacks or envelopes1.7%

8441.30 Machines; for making cartons, boxes, cases, tubes, drums or similar containers (other than by moulding), of paper pulp, paper or paperboard

• 8441.30.00.00 Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by moulding1.7%

8441.40 Machines; for moulding articles, in paper pulp, paper or paperboard

• 8441.40.00.00 Machines for moulding articles in paper pulp, paper or paperboard1.7%

8441.80 Machinery; n.e.c. in heading no. 8441, for making up paper pulp, paper or paperboard

• 8441.80.00.00 Other machinery1.7%

8441.90 Machinery; parts of machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds

• 8441.90.10.00 Of cutting machines1.7%
• 8441.90.90.00 Other1.7%

8442 Machinery, apparatus and equipment (excluding machines of headings 8456 to 8465) for preparing or making printing components; plates, cylinders and other printing components; lithographic stones prepared for printing purposes

8442.30 Machinery, apparatus and equipment (excluding machines of heading no. 8456 to 8465) for preparing or making printing components

• 8442.30.00.00 Machinery, apparatus and equipmentFree

8442.40 Machinery, apparatus and equipment (excluding machines of heading no. 8456 to 8465) for preparing or making printing components; parts thereof

• 8442.40.00.00 Parts of the foregoing machinery, apparatus or equipmentFree

8442.50 Plates, cylinders and other printing components; lithographic stones prepared for printing purposes (for example, planed, grained or polished)

• 8442.50.00.00 Plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished)Free

8443 Printing machinery; used for printing by means of plates, cylinders and other printing components of heading 84.42; other printers, copying machines and facsimile machines, whether or not combined; parts and accessories thereof

8443.11 Printing machinery; offset, reel-fed

• 8443.11.00.00 Offset printing machinery, reel fed1.7%

8443.12 Printing machinery; offset, sheet-fed, office type (sheet size not exceeding 22 x 36cm in the unfolded state)

• 8443.12.00.00 Offset printing machinery, sheet fed, office type (using sheets with one side not exceeding 22 cm and the other side not exceeding 36 cm in the unfolded state)1.7%

8443.13 Printing machinery; offset, n.e.c. in item no. 8443.1

• Sheet fed
• 8443.13.10.00 Used1.7%
• New, taking sheets of a size
• 8443.13.32.00 Not exceeding 53 × 75 cm1.7%
• 8443.13.34.00 Exceeding 53 × 75 cm but not exceeding 75 × 107 cm1.7%
• 8443.13.38.00 Exceeding 75 × 107 cm1.7%
• 8443.13.90.00 Other1.7%

8443.14 Printing machinery; letterpress, reel-fed, excluding flexographic printing

• 8443.14.00.00 Letterpress printing machinery, reel fed, excluding flexographic printing1.7%

8443.15 Printing machinery; letterpress, other than reel-fed, excluding flexographic printing

• 8443.15.00.00 Letterpress printing machinery, other than reel fed, excluding flexographic printing1.7%

8443.16 Printing machinery; flexographic

• 8443.16.00.00 Flexographic printing machinery1.7%

8443.17 Printing machinery; gravure

• 8443.17.00.00 Gravure printing machinery1.7%

8443.19 Printing machinery; used for printing by means of plates, cylinders and other printing components of heading 84.42, n.e.c. in item no. 8443.1

• 8443.19.20.00 For printing textile materials1.7%
• 8443.19.40.00 For use in the production of semiconductors1.7%
• 8443.19.70.00 Other1.7%

8443.31 Printing, copying, and facsimile machines; machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data processing machine or to a network

• 8443.31.00.00 Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data-processing machine or to a networkFree

8443.32 Printing, copying, and facsimile machines; single-function printing, copying or facsimile machines, capable of connecting to an automatic data processing machine or to a network

• 8443.32.10.00 PrintersFree
• 8443.32.80.00 OtherFree

8443.39 Printing, copying, and facsimile machines; single-function printing, copying or facsimile machines, not capable of connecting to an automatic data processing machine or to a network

• 8443.39.00.00 OtherFree

8443.91 Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442; parts and accessories

• 8443.91.10.00 Of apparatus of subheading 8443 19 401.7%
• Other
• 8443.91.91.00 Of cast iron or cast steelFree
• 8443.91.99.00 OtherFree

8443.99 Printing machinery; parts and accessories, n.e.c. in item no. 8443.91

• 8443.99.10.00 Electronic assembliesFree
• 8443.99.90.00 OtherFree

8444 Textile machinery; for extruding, drawing, texturing or cutting man-made textile materials

8444.00 Textile machinery; for extruding, drawing, texturing or cutting man-made textile materials

• 8444.00.10.00 Machines for extruding1.7%
• 8444.00.90.00 Other1.7%

8445 Textile machinery; spinning, doubling, twisting machines, textile reeling or winding machines and machines for preparing textile yarns for use on machines of heading no. 8446 and 8447

8445.11 Textile machinery; carding machines for preparing textile fibres

• 8445.11.00.00 Carding machines1.7%

8445.12 Textile machinery; combing machines for preparing textile fibres

• 8445.12.00.00 Combing machines1.7%

8445.13 Textile machinery; drawing or roving machines for preparing textile fibres

• 8445.13.00.00 Drawing or roving machines1.7%

8445.19 Textile machinery; n.e.c. in heading no. 8445, for preparing textile fibres

• 8445.19.00.00 Other1.7%

8445.20 Textile machinery; spinning machines

• 8445.20.00.00 Textile spinning machines1.7%

8445.30 Textile machinery; doubling or twisting machines

• 8445.30.00.00 Textile doubling or twisting machines1.7%

8445.40 Textile machinery; winding (including weft-winding) or reeling machines

• 8445.40.00.00 Textile winding (including weft-winding) or reeling machines1.7%

8445.90 Textile machinery; involved in textile fibre or textile yarn preparation and n.e.c. in heading no. 8445

• 8445.90.00.00 Other1.7%

8446 Weaving machines (looms)

8446.10 Weaving machines (looms); for weaving fabrics of a width 30cm or less

• 8446.10.00.00 For weaving fabrics of a width not exceeding 30 cm1.7%

8446.21 Weaving machines (looms); for weaving fabrics of a width exceeding 30cm, shuttle type, power looms

• 8446.21.00.00 Power looms1.7%

8446.29 Weaving machines (looms); for weaving fabrics of a width exceeding 30cm, shuttle type, other than power looms

• 8446.29.00.00 Other1.7%

8446.30 Weaving machines (looms); for weaving fabrics of a width exceeding 30cm, shuttleless type

• 8446.30.00.00 For weaving fabrics of a width exceeding 30 cm, shuttleless type1.7%

8447 Knitting machines, stitch-bonding machines and machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting

8447.11 Knitting machines; circular, with cylinder diameter not exceeding 165mm

• 8447.11.00.00 With cylinder diameter not exceeding 165 mm1.7%

8447.12 Knitting machines; circular, with cylinder diameter exceeding 165mm

• 8447.12.00.00 With cylinder diameter exceeding 165 mm1.7%

8447.20 Knitting machines; flat, stitch-bonding machines

• 8447.20.20.00 Warp knitting machines (including Raschel type); stitch-bonding machines1.7%
• 8447.20.80.00 Other1.7%

8447.90 Machines; for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting

• 8447.90.00.00 Other1.7%

8448 Machinery, auxiliary; for use with machines of heading no. 8444 to 8447 (e.g. dobbies, jacquards, automatic stop motions, shuttle changing mechanisms) parts, accessories for machines of heading no. 8444, 8447

8448.11 Machinery, auxiliary; dobbies and jacquards, card reducing, copying, punching or assembling machines for use therewith

• 8448.11.00.00 Dobbies and jacquards; card-reducing, copying, punching or assembling machines for use therewith1.7%

8448.19 Machinery, auxiliary; for machines of heading no. 8444, 8445, 8446 or 8447, n.e.c. in item no. 8448.11

• 8448.19.00.00 Other1.7%

8448.20 Machines; parts and accessories of machines or auxiliary machinery of heading no. 8444

• 8448.20.00.00 Parts and accessories of machines of heading 8444 or of their auxiliary machinery1.7%

8448.31 Machines, card clothing; parts and accessories

• 8448.31.00.00 Card clothing1.7%

8448.32 Machines; parts and accessories of machines or auxiliary machinery for preparing textile fibres, other than card clothing

• 8448.32.00.00 Of machines for preparing textile fibres, other than card clothing1.7%

8448.33 Machines; parts and accessories of machines or auxiliary machinery, spindles, spindle flyers, spinning rings and ring travellers

• 8448.33.00.00 Spindles, spindle flyers, spinning rings and ring travellers1.7%

8448.39 Machines; parts and accessories of machines or auxiliary machinery of heading no. 8445, n.e.c. in item no. 8448.3

• 8448.39.00.00 Other1.7%

8448.42 Weaving machines (looms); parts including their auxiliary machinery, and accessories thereof, reeds for looms, healds and heald-frames

• 8448.42.00.00 Reeds for looms, healds and heald-frames1.7%

8448.49 Weaving machines (looms); parts including their auxiliary machinery, and accessories thereof n.e.c. in item no. 8448.4

• 8448.49.00.00 Other1.7%

8448.51 Machines; parts and accessories of machines of heading no. 8447 or auxiliary machinery, sinkers, needles and other articles used in forming stitches

• 8448.51.10.00 Sinkers1.7%
• 8448.51.90.00 Other1.7%

8448.59 Machines; parts and accessories of machines or auxiliary machinery of heading no. 8447, other than sinkers, needles and other articles used in forming stitches

• 8448.59.00.00 Other1.7%

8449 Machinery; for manufacture or finishing felt or non-wovens in the piece or in shapes, including machinery for making felt hats, blocks for making hats

8449.00 Machinery; for manufacture or finishing felt or non-wovens in the piece or in shapes, including machinery for making felt hats, blocks for making hats

• 8449.00.00.00 Machinery for the manufacture or finishing of felt or nonwovens in the piece or in shapes, including machinery for making felt hats; blocks for making hats1.7%

8450 Household or laundry-type washing machines; including machines which both wash and dry

8450.11 Washing machines; household or laundry-type, fully-automatic, (of a dry linen capacity not exceeding 10kg)

• Each of a dry linen capacity not exceeding 6 kg
• 8450.11.11.00 Front-loading machines3%
• 8450.11.19.00 Top-loading machines3%
• 8450.11.90.00 Each of a dry linen capacity exceeding 6 kg but not exceeding 10 kg2.6%

8450.12 Washing machines; household or laundry-type, with built-in centrifugal drier, (not fully-automatic), of a dry linen capacity not exceeding 10kg

• 8450.12.00.00 Other machines, with built-in centrifugal drier2.7%

8450.19 Washing machines; household or laundry-type, not fully-automatic, without built-in centrifugal drier, of a dry linen capacity not exceeding 10kg

• 8450.19.00.00 Other2.7%

8450.20 Washing machines; household or laundry-type, of a dry linen capacity exceeding 10kg

• 8450.20.00.00 Machines, each of a dry linen capacity exceeding 10 kg2.2%

8450.90 Washing machines; parts for household or laundry-type

• 8450.90.00.00 Parts2.7%

8451 Machinery (not of heading no. 8450) for washing, cleaning, wringing, drying, ironing, pressing, bleaching, dyeing, dressing, finishing, coating or impregnating textile yarn, fabrics or made up articles

8451.10 Dry-cleaning machines

• 8451.10.00.00 Dry-cleaning machines2.2%

8451.21 Drying machines; of a dry linen capacity not exceeding 10kg

• 8451.21.00.00 Each of a dry linen capacity not exceeding 10 kg2.2%

8451.29 Drying machines; of a dry linen capacity exceeding 10kg

• 8451.29.00.00 Other2.2%

8451.30 Ironing machines and presses (including fusing presses)

• 8451.30.00.00 Ironing machines and presses (including fusing presses)2.2%

8451.40 Machines; for washing, bleaching or dyeing

• 8451.40.00.00 Washing, bleaching or dyeing machines2.2%

8451.50 Machines; for reeling, unreeling, folding, cutting or pinking textile fabrics

• 8451.50.00.00 Machines for reeling, unreeling, folding, cutting or pinking textile fabrics2.2%

8451.80 Machinery; for wringing, dressing, finishing, coating or impregnating textile yarns, fabrics or made up textile articles; for applying paste to base fabric used in manufacture of floor coverings

• 8451.80.10.00 Machines used in the manufacture of linoleum or other floor coverings for applying the paste to the base fabric or other support2.2%
• 8451.80.30.00 Machines for dressing or finishing2.2%
• 8451.80.80.00 Other2.2%

8451.90 Machinery; parts, of the machinery of heading no. 8451

• 8451.90.00.00 Parts2.2%

8452 Sewing machines; other than book-sewing machines of heading no. 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles

8452.10 Sewing machines; of the household type

• Sewing machines (lock-stitch only), with heads of a weight not exceeding 16 kg without motor or 17 kg including the motor; sewing machine heads (lock-stitch only), of a weight not exceeding 16 kg without motor or 17 kg including the motor
• 8452.10.11.00 Sewing machines having a value (not including frames, tables or furniture) of more than € 65 each5.7%
• 8452.10.19.00 Other9.7%
• 8452.10.90.00 Other sewing machines and other sewing machine heads3.7%

8452.21 Sewing machines; (not household type), automatic units

• 8452.21.00.00 Automatic units3.7%

8452.29 Sewing machines; not household or automatic unit type

• 8452.29.00.00 Other3.7%

8452.30 Sewing machine needles

• 8452.30.00.00 Sewing machine needles2.7%

8452.90 Sewing machines; furniture, bases and covers for sewing machines and parts thereof, and other parts of sewing machines

• 8452.90.00.00 Furniture, bases and covers for sewing machines and parts thereof; other parts of sewing machines2.7%

8453 Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines

8453.10 Machinery; for preparing, tanning or working hides, skins or leather, other than sewing machines

• 8453.10.00.00 Machinery for preparing, tanning or working hides, skins or leather1.7%

8453.20 Machinery; for making or repairing footwear, other than sewing machines

• 8453.20.00.00 Machinery for making or repairing footwear1.7%

8453.80 Machinery; for making or repairing articles of hides, skins or leather, other than sewing machines

• 8453.80.00.00 Other machinery1.7%

8453.90 Machinery; parts of those for preparing, tanning or working hides, skins or leather, for making or repairing footwear or other articles of hides, skin or leather, other than sewing machines

• 8453.90.00.00 Parts1.7%

8454 Converters, ladles, ingot moulds and casting machines; of a kind used metallurgy or in metal foundries

8454.10 Converters; of a type used in metallurgy or in metal foundries

• 8454.10.00.00 Converters1.7%

8454.20 Ingot moulds and ladles; of a kind used in metallurgy or in metal foundries

• 8454.20.00.00 Ingot moulds and ladles1.7%

8454.30 Casting machines; of a kind used in metallurgy or in metal foundries

• 8454.30.10.00 For casting under pressure1.7%
• 8454.30.90.00 Other1.7%

8454.90 Machines; parts of converters, ladles, ingot moulds and casting machines, of a kind used in metallurgy or in metal foundries

• 8454.90.00.00 Parts1.7%

8455 Metal-rolling mills and rolls therefor

8455.10 Metal-rolling mills; tube mills

• 8455.10.00.00 Tube mills2.7%

8455.21 Metal-rolling mills; hot or combination hot and cold rolling mills

• 8455.21.00.00 Hot or combination hot and cold2.7%

8455.22 Metal-rolling mills; cold

• 8455.22.00.00 Cold2.7%

8455.30 Metal-rolling mills; rolls thereof

• 8455.30.10.00 Of cast iron2.7%
• Of open-die forged steel
• 8455.30.31.00 Hot-rolling work-rolls; hot-rolling and cold-rolling back-up rolls2.7%
• 8455.30.39.00 Cold-rolling work-rolls2.7%
• 8455.30.90.00 Other2.7%

8455.90 Metal-rolling mills; parts thereof

• 8455.90.00.00 Other parts2.7%

8456 Machine-tools; for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electro-discharge, electro-chemical, electron beam, ionic-beam, or plasma arc processes; water-jet cutting machines

8456.11 Machine-tools; for working any material by removal of material; operated by laser

• 8456.11.10.00 Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machinesFree
• 8456.11.90.00 Other4.5%

8456.12 Machine-tools; for working any material by removal of material; operated by other light or photon beam processes (not laser)

• 8456.12.10.00 Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machinesFree
• 8456.12.90.00 Other4.5%

8456.20 Machine-tools; for working any material by removal of material, operated by ultrasonic processes

• 8456.20.00.00 Operated by ultrasonic processes3.5%

8456.30 Machine-tools; for working any material by removal of material, operated by electro-discharge processes

• Numerically controlled
• 8456.30.11.00 Wire-cut3.5%
• 8456.30.19.00 Other3.5%
• 8456.30.90.00 Other3.5%

8456.40 Machine tools; for working any material by removal of material; operated by plasma arc processes;

• 8456.40.00.00 Operated by plasma arc processes3.5%

8456.50 Machine tools; for working any material by removal of material; operated by water-jet cutting machines

• 8456.50.00.00 Water-jet cutting machines1.7%

8456.90 Machine tools; for working any material by removal of material; operated by other processes n.e.c. in heading 8456

• 8456.90.00.00 Other3.5%

8457 Machining centres, unit construction machines (single station) and multi-station transfer machines for working metal

8457.10 Machining centres; for working metal

• 8457.10.10.00 Horizontal2.7%
• 8457.10.90.00 Other2.7%

8457.20 Machines; unit construction machines (single station), for working metal

• 8457.20.00.00 Unit construction machines (single station)2.7%

8457.30 Metal machines; multi-station transfer machines, for working metal

• 8457.30.10.00 Numerically controlled2.7%
• 8457.30.90.00 Other2.7%

8458 Lathes for removing metal

8458.11 Lathes; for removing metal, horizontal, numerically controlled

• 8458.11.20.00 Turning centres2.7%
• Automatic lathes
• 8458.11.41.00 Single spindle2.7%
• 8458.11.49.00 Multi-spindle2.7%
• 8458.11.80.00 Other2.7%

8458.19 Lathes; for removing metal, horizontal, other than numerically controlled

• 8458.19.00.00 Other2.7%

8458.91 Lathes; for removing metal, numerically controlled, other than horizontal lathes

• 8458.91.20.00 Turning centres2.7%
• 8458.91.80.00 Other2.7%

8458.99 Lathes; for removing metal, other than horizontal or numerically controlled lathes

• 8458.99.00.00 Other2.7%

8459 Machine-tools; (including way-type unit head machines) for drilling, boring, milling, threading or tapping by removing metal, other than lathes of heading no. 8458

8459.10 Machine-tools; way-type unit head machines, for drilling, boring, milling, threading or tapping by removing metal, other than lathes of heading no. 8458

• 8459.10.00.00 Way-type unit head machines2.7%

8459.21 Machine-tools; for drilling by removing metal, numerically controlled

• 8459.21.00.00 Numerically controlled2.7%

8459.29 Machine-tools; for drilling by removing metal, other than numerically controlled

• 8459.29.00.00 Other2.7%

8459.31 Machine-tools; for boring-milling by removing metal, numerically controlled

• 8459.31.00.00 Numerically controlled1.7%

8459.39 Machine-tools; for boring-milling by removing metal, other than numerically controlled

• 8459.39.00.00 Other1.7%

8459.41 Machine-tools; for boring by removing metal, numerically controlled boring machines, n.e.c. in heading 8459

• 8459.41.00.00 Numerically controlled1.7%

8459.49 Machine-tools; for boring by removing metal, not numerically controlled boring machines, n.e.c. in heading 8459

• 8459.49.00.00 Other1.7%

8459.51 Machine-tools; for milling by removing metal, knee-type, numerically controlled

• 8459.51.00.00 Numerically controlled2.7%

8459.59 Machine-tools; for milling by removing metal, knee-type, other than numerically controlled

• 8459.59.00.00 Other2.7%

8459.61 Machine-tools; for milling by removing metal, (not knee-type), numerically controlled

• 8459.61.10.00 Tool milling machines2.7%
• 8459.61.90.00 Other2.7%

8459.69 Machine-tools; for milling by removing metal, not knee-type, other than numerically controlled

• 8459.69.10.00 Tool milling machines2.7%
• 8459.69.90.00 Other2.7%

8459.70 Machine-tools; for threading or tapping by removing metal

• 8459.70.00.00 Other threading or tapping machines2.7%

8460 Machine-tools; for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal, sintered metal carbides or cermets by means of grinding stones, abrasives or polishing products

8460.12 Machine-tools; flat-surface grinding machines, numerically controlled

• 8460.12.00.00 Numerically controlled1.7%

8460.19 Machine-tools; flat-surface grinding machines, other than numerically controlled

• 8460.19.00.00 Other1.7%

8460.22 Machine-tools; grinding machines (excluding flat-surface), centreless, numerically controlled

• 8460.22.00.00 Centreless grinding machines, numerically controlled1.7%

8460.23 Machine-tools; cylindrical grinding machines (excluding flat-surface and centreless), numerically controlled

• 8460.23.00.00 Other cylindrical grinding machines, numerically controlled1.7%

8460.24 Machine-tools; grinding machines (excluding flat-surface, cylindrical and centreless), numerically controlled

• 8460.24.00.00 Other, numerically controlled1.7%

8460.29 Machine-tools; grinding machines (excluding flat-surface), other than numerically controlled

• 8460.29.10.00 For cylindrical surfaces2.7%
• 8460.29.90.00 Other2.7%

8460.31 Machine-tools; sharpening (tool or cutter grinding) machines, numerically controlled

• 8460.31.00.00 Numerically controlled1.7%

8460.39 Machine-tools; sharpening (tool or cutter grinding) machines, other than numerically controlled

• 8460.39.00.00 Other1.7%

8460.40 Machine-tools; for honing or lapping

• 8460.40.10.00 Numerically controlled1.7%
• 8460.40.90.00 Other1.7%

8460.90 Machine-tools; for deburring, grinding, polishing or otherwise finishing metal, sintered metal carbides or cermets by means of grinding stones, abrasives or polishing products, n.e.c. in heading no. 8460

• 8460.90.00.00 Other1.7%

8461 Machine-tools; for planing, shaping, slotting, broaching, gear cutting and grinding, finishing, sawing, cutting off and other tools working by removing metal, sintered metal carbides or cermets n.e.c.

8461.20 Machine-tools; shaping or slotting machines, working by removing metal, sintered metal carbides or cermets

• 8461.20.00.00 Shaping or slotting machines1.7%

8461.30 Machine-tools; broaching machines, working by removing metal, sintered metal carbides or cermets

• 8461.30.10.00 Numerically controlled1.7%
• 8461.30.90.00 Other1.7%

8461.40 Machine-tools; gear cutting, gear grinding or gear finishing machines, working by removing metal, sintered metal carbides or cermets

• Gear-cutting machines (including abrasive gear-cutting machines)
• For cutting cylindrical gears
• 8461.40.11.00 Numerically controlled2.7%
• 8461.40.19.00 Other2.7%
• For cutting other gears
• 8461.40.31.00 Numerically controlled1.7%
• 8461.40.39.00 Other1.7%
• Gear-finishing machines
• Fitted with a micrometric adjusting system, in which the positioning in any one axis can be set up to an accuracy of at least 0,01 mm
• 8461.40.71.00 Numerically controlled2.7%
• 8461.40.79.00 Other2.7%
• 8461.40.90.00 Other1.7%

8461.50 Machine-tools; sawing or cutting-off machines, working by removing metal, sintered metal carbides or cermets

• Sawing machines
• 8461.50.11.00 Circular saws1.7%
• 8461.50.19.00 Other1.7%
• 8461.50.90.00 Cutting-off machines1.7%

8461.90 Machine-tools; planing machines, and other machine-tools n.e.c. in heading no. 8461; working by removing metal, sinistered metal carbides or cerments.

• 8461.90.00.00 Other2.7%

8462 Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening,

8462.11 Machine-tools; forging and die-forging machines (including presses), closed die forging machines, for working metal

• 8462.11.10.00 Numerically controlled2.7%
• 8462.11.90.00 Other1.7%

8462.19 Machine-tools; hot forming machines, hot hammers, for working metal

• 8462.19.10.00 Numerically controlled2.7%
• 8462.19.90.00 Other1.7%

8462.22 Machine-tools; bending, folding, straightening or flattening machines (including press brakes) for flat products, for working metal, numerically controlled

• 8462.22.10.00 Numerically controlled2.7%
• 8462.22.90.00 Other1.7%

8462.23 Machine-tools; bending, folding, straightening or flattening machines (including presses), for working metal, numerically controlled press brakes

• 8462.23.00.00 Numerically controlled press brakes2.7%

8462.24 Machine-tools; bending, folding, straightening or flattening machines (including presses), for working metal, numerically controlled panel benders

• 8462.24.00.00 Numerically controlled panel benders2.7%

8462.25 Machine-tools; bending, folding, straightening or flattening machines (including presses), for working metal, numerically controlled roll forming machines

• 8462.25.00.00 Numerically controlled roll forming machines2.7%

8462.26 Machine-tools; bending, folding, straightening or flattening machines (including presses), for working metal, numerically controlled bending, folding, straightening or fattening machines (not press brakes, panel benders or roll forming machines)

• 8462.26.00.00 Other numerically controlled bending, folding, straightening or flattening machines2.7%

8462.29 Machine-tools; bending, folding, straightening or flattening machines (including press brakes), for working metal, numerically controlled n.e.c. in item 84.62.2

• 8462.29.00.00 Other1.7%

8462.32 Machine-tools; slitting lines and cut-to-length lines, for working metal

• 8462.32.10.00 Numerically controlled2.7%
• 8462.32.90.00 Other1.7%

8462.33 Machine-tools; shearing machines (excluding presses) for flat products, numerically controlled, other than combined punching and shearing machines, for working metal

• 8462.33.00.00 Numerically controlled shearing machines2.7%

8462.39 Machine-tools; shearing machines (excluding presses) for flat products, other than numerically controlled, other than combined punching and shearing machines, for working metal

• 8462.39.00.00 Other1.7%

8462.42 Machine-tools; punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines, numerically controlled, for working metal

• 8462.42.00.00 Numerically controlled2.7%

8462.49 Machine-tools; punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines, other than numerically controlled, for working metal

• 8462.49.00.00 Other1.7%

8462.51 Machine-tools; for working tube, pipe, hollow section and bar (excluding presses), for working metal, numerically controlled

• 8462.51.00.00 Numerically controlled2.7%

8462.59 Machine-tools; for working tube, pipe, hollow section and bar (excluding presses), for working metal, not numerically controlled

• 8462.59.00.00 Other1.7%

8462.61 Machine-tools; cold metal working presses, hydraulic presses

• 8462.61.10.00 Numerically controlled2.7%
• 8462.61.90.00 Other2.7%

8462.62 Machine-tools; cold metal working presses, mechanical presses

• 8462.62.10.00 Numerically controlled2.7%
• 8462.62.90.00 Other1.7%

8462.63 Machine-tools; cold metal working presses, servo-presses

• 8462.63.10.00 Numerically controlled2.7%
• 8462.63.90.00 Other1.7%

8462.69 Machine-tools; cold metal working presses, other than hydraulic, mechanical or servo-presses

• 8462.69.10.00 Numerically controlled2.7%
• 8462.69.90.00 Other1.7%

8462.90 Machine-tools; (including presses) for working metal by forging, hammering or die-forging, for bending, folding, straightening, flattening, shearing, punching, notching or nibbling metal, n.e.c. in heading 8462

• 8462.90.10.00 Numerically controlled2.7%
• 8462.90.90.00 Other1.7%

8463 Machine-tools; n.e.c. for working metal, sintered metal carbides or cermets without removing material

8463.10 Machine-tools; for working metal, sintered metal carbides or cermets, without removing material, draw-benches for bars, tubes, profiles, wire or the like

• 8463.10.10.00 Drawbenches for wire2.7%
• 8463.10.90.00 Other2.7%

8463.20 Machine-tools; for working metal, sintered metal carbides or cermets, without removing material, thread rolling machines

• 8463.20.00.00 Thread-rolling machines2.7%

8463.30 Machine-tools; machines for working wire, without removing material

• 8463.30.00.00 Machines for working wire2.7%

8463.90 Machine-tools; for working metal, sintered metal carbides or cermets, without removing material, n.e.c. in heading no. 8463

• 8463.90.00.00 Other2.7%

8464 Machine-tools; for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass

8464.10 Machine-tools; sawing machines, for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass

• 8464.10.00.00 Sawing machines2.2%

8464.20 Machine-tools; grinding or polishing machines, for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass

• For working glass
• 8464.20.11.00 Optical glass2.2%
• 8464.20.19.00 Other2.2%
• 8464.20.80.00 Other2.2%

8464.90 Machine-tools; for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass, (other than sawing, grinding or polishing machines)

• 8464.90.00.00 Other2.2%

8465 Machine-tools; (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard plastics or rubber or similar hard materials

8465.10 Machine-tools; which can carry out different types of machining operations without tool change between such operations, for working wood, cork, bone, hard rubber, hard plastics or similar

• 8465.10.10.00 With manual transfer of workpiece between each operation2.7%
• 8465.10.90.00 With automatic transfer of workpiece between each operation2.7%

8465.20 Machine-tools; for working wood, cork, bone, hard rubber, hard plastics or similar hard materials; machining centres

• 8465.20.00.00 Machining centres2.7%

8465.91 Machine-tools; for working wood, cork, bone, hard rubber, hard plastics or similar hard materials; sawing machines

• 8465.91.10.00 Bandsaws2.7%
• 8465.91.20.00 Circular saws2.7%
• 8465.91.90.00 Other2.7%

8465.92 Machine-tools; for working wood, cork, bone, hard rubber, hard plastics or similar hard materials; planing, milling or moulding (by cutting) machines

• 8465.92.00.00 Planing, milling or moulding (by cutting) machines2.7%

8465.93 Machine-tools; for working wood, cork, bone, hard rubber, hard plastics or similar hard materials; grinding, sanding or polishing machines

• 8465.93.00.00 Grinding, sanding or polishing machines2.7%

8465.94 Machine-tools; for working wood, cork, bone, hard rubber, hard plastics or similar hard materials; bending or assembling machines

• 8465.94.00.00 Bending or assembling machines2.7%

8465.95 Machine-tools; for working wood, cork, bone, hard rubber, hard plastics or similar hard materials; drilling or morticing machines

• 8465.95.00.00 Drilling or morticing machines2.7%

8465.96 Machine-tools; for working wood, cork, bone, hard rubber, hard plastics or similar hard materials; splitting, slicing or paring machines

• 8465.96.00.00 Splitting, slicing or paring machines2.7%

8465.99 Machine-tools; for working wood, cork, bone, hard rubber, hard plastics or similar hard materials; n.e.c. in heading no. 8465

• 8465.99.00.00 Other2.7%

8466 Parts & accessories suited for use only/mainly with machines of headings 8456-8465, including work/tool holders, self-opening dieheads, dividing heads & other special attachments for the machines; tool holders for any type of tool for working in the hand

8466.10 Parts & accessories suited for use solely/principally with machines of headings 8456-8465; tool holders and self-opening dieheads

• Tool holders
• 8466.10.20.00 Arbors, collets and sleeves1.2%
• Other
• 8466.10.31.00 For lathes1.2%
• 8466.10.38.00 Other1.2%
• 8466.10.80.00 Self-opening dieheads1.2%

8466.20 Parts & accessories suited for use solely/principally with machines of headings 8456-8465; work holders

• 8466.20.20.00 Jigs and fixtures for specific applications; sets of standard jig and fixture components1.2%
• Other
• 8466.20.91.00 For lathes1.2%
• 8466.20.98.00 Other1.2%

8466.30 Parts & accessories suited for use solely/principally with machines of headings 8456-8465; dividing heads and other special attachments for machines

• 8466.30.00.00 Dividing heads and other special attachments for machines1.2%

8466.91 Parts & accessories suited for use solely/principally; for the machines of heading no. 8464, n.e.c. in heading no. 8466

• 8466.91.20.00 Of cast iron or cast steel1.2%
• 8466.91.95.00 Other1.2%

8466.92 Parts & accessories suited for use solely/principally for the machines of heading no. 8465, n.e.c. in heading no. 8466

• 8466.92.20.00 Of cast iron or cast steel1.2%
• 8466.92.80.00 Other1.2%

8466.93 Parts & accessories suited for use solely/principally with machines of headings 8456-8465; n.e.c. in heading no. 8466

• 8466.93.40.00 Parts and accessories of machines of subheadings 8456 11 10, 8456 12 10, 8456 20, 8456 30, 8457 10, 8458 91, 8459 21 00, 8459 61 or 8461 50 of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machinesFree
• Other
• 8466.93.50.00 For machines of subheading 8456 50 001.7%
• 8466.93.60.00 Other1.2%

8466.94 Machine-tools; parts and accessories, for the machines of heading no. 8462 or 8463, n.e.c. in heading no. 8466

• 8466.94.00.00 For machines of heading 8462 or 84631.2%

8467 Tools; for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor

8467.11 Tools; for working in the hand, pneumatic, rotary type (including combined rotary-percussion)

• 8467.11.10.00 Metalworking1.7%
• 8467.11.90.00 Other1.7%

8467.19 Tools; for working in the hand, pneumatic, other than rotary type

• 8467.19.00.00 Other1.7%

8467.21 Tools; for working in the hand, with self-contained electric motor; drills of all kinds

• 8467.21.10.00 Capable of operation without an external source of power2.7%
• Other
• 8467.21.91.00 Electropneumatic2.7%
• 8467.21.99.00 Other2.7%

8467.22 Tools; for working in the hand, with self-contained electric motor; saws

• 8467.22.10.00 Chainsaws2.7%
• 8467.22.30.00 Circular saws2.7%
• 8467.22.90.00 Other2.7%

8467.29 Tools; for working in the hand, with self-contained electric motor; other than saws and drills

• 8467.29.20.00 Capable of operation without an external source of power2.7%
• Other
• Grinders and sanders
• 8467.29.51.00 Angle grinders2.7%
• 8467.29.53.00 Belt sanders2.7%
• 8467.29.59.00 Other2.7%
• 8467.29.70.00 Planers2.7%
• 8467.29.80.00 Hedge trimmers and lawn edge cutters2.7%
• 8467.29.85.00 Other2.7%

8467.81 Tools; for working in the hand, chain saws with self-contained non-electric motor

• 8467.81.00.00 Chainsaws1.7%

8467.89 Tools; for working in the hand, (other than chain saws), hydraulic or with self-contained non-electric motor, (not pneumatic)

• 8467.89.00.00 Other1.7%

8467.91 Tools; for working in the hand, parts of chain saws, with self-contained non-electric motor

• 8467.91.00.00 Of chainsaws1.7%

8467.92 Tools; for working in the hand, parts of pneumatic tools

• 8467.92.00.00 Of pneumatic tools1.7%

8467.99 Tools; for working in the hand, parts thereof for other than chain saws and pneumatic tools

• 8467.99.00.10 Pole hedge trimmer cutting elements: in the form of hedge trimmer attachment; with a knife length of 60 cm and teeth opening of 30 mm; with angle adjustment of the blade; with integrated single stage gearbox; with a magnesium cast body; for use in the manufacture of garden machinery and power tools1.7%
• 8467.99.00.90 Other1.7%

8468 Machinery and apparatus for soldering, brazing, welding, whether or not capable of cutting, other than those of heading no. 8515; gas-operated surface tempering machines and appliances

8468.10 Machinery and apparatus; hand-held blow pipes for soldering, brazing or welding, whether or not capable of cutting

• 8468.10.00.00 Hand-held blow pipes2.2%

8468.20 Machinery and apparatus; gas operated machinery and apparatus n.e.c. in item no. 8468.10, for soldering, brazing or welding, whether or not capable of cutting

• 8468.20.00.00 Other gas-operated machinery and apparatus2.2%

8468.80 Machinery and apparatus; for soldering, brazing or welding, whether or not capable of cutting, n.e.c. in heading no. 8468

• 8468.80.00.00 Other machinery and apparatus2.2%

8468.90 Machinery and apparatus; parts, soldering, brazing or welding, whether or not capable of cutting, parts thereof

• 8468.90.00.00 Parts2.2%

8470 Calculating machines and pocket-size data recording, reproducing and displaying machines with calculating functions; accounting machines, postage-franking machines, ticket-issuing machines and similar, incorporating a calculating device; cash registers

8470.10 Calculating machines; electronic calculators capable of operation without an external source of electric power and pocket-size data recording, reproducing and displaying machines with calculating functions

• 8470.10.00.00 Electronic calculators capable of operation without an external source of electric power and pocket-size data-recording, reproducing and displaying machines with calculating functionsFree

8470.21 Calculating machines; electronic, incorporating a printing device, needing an external source of power

• 8470.21.00.00 Incorporating a printing deviceFree

8470.29 Calculating machines; electronic, (not incorporating a printing device), needing an external power source

• 8470.29.00.00 OtherFree

8470.30 Calculating machines; non-electronic

• 8470.30.00.00 Other calculating machinesFree

8470.50 Cash registers

• 8470.50.00.00 Cash registersFree

8470.90 Machines incorporating a calculating device; n.e.c. in heading no. 8470

• 8470.90.00.00 OtherFree

8471 Automatic data processing machines and units thereof, magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included

8471.30 Automatic data processing machines; portable, weighing not more than 10kg, consisting of at least a central processing unit, a keyboard and a display

• 8471.30.00.00 Portable automatic data-processing machines, weighing not more than 10 kg, consisting of at least a central processing unit, a keyboard and a displayFree

8471.41 Automatic data processing machines; comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined, n.e.c. in item no. 8471.30

• 8471.41.00.00 Comprising in the same housing at least a central processing unit and an input and output unit, whether or not combinedFree

8471.49 Automatic data processing machines; presented in the form of systems, n.e.c. in item no. 8471.30 or 8471.41

• 8471.49.00.00 Other, presented in the form of systemsFree

8471.50 Units of automatic data processing machines; processing units other than those of item no. 8471.41 or 8471.49, whether or not containing in the same housing one or two of the following types of unit: storage units, input units or output units

• 8471.50.00.00 Processing units other than those of subheading 8471 41 or 8471 49, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output unitsFree

8471.60 Units of automatic data processing machines; input or output units, whether or not containing storage units in the same housing

• 8471.60.60.00 KeyboardsFree
• 8471.60.70.00 OtherFree

8471.70 Units of automatic data processing machines; storage units

• 8471.70.20.00 Central storage unitsFree
• Other
• Disk storage units
• 8471.70.30.00 Optical, including magneto-opticalFree
• Other
• 8471.70.50.00 Hard disk drivesFree
• 8471.70.70.00 OtherFree
• 8471.70.80.00 Magnetic tape storage unitsFree
• 8471.70.98.00 OtherFree

8471.80 Units of automatic data processing machines; n.e.c. in item no. 8471.50, 8471.60 or 8471.70

• 8471.80.00.00 Other units of automatic data-processing machinesFree

8471.90 Magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included

• 8471.90.00.00 OtherFree

8472 Office machines; not elsewhere classified

8472.10 Office machines; duplicating machines

• 8472.10.00.00 Duplicating machinesFree

8472.30 Office machines; for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or cancelling postage stamps

• 8472.30.00.00 Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or cancelling postage stamps2.2%

8472.90 Office machines; not elsewhere classified

• 8472.90.10.00 Coin-sorting, coin-counting or coin-wrapping machinesFree
• 8472.90.80.00 OtherFree

8473 Machinery; parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of headings 84.70 to 84.72

8473.21 Calculating machines; parts and accessories of the electronic calculating machines of item no. 8470.10, 8470.21 or 8470.29 (other than covers, carrying cases and the like)

• 8473.21.10.00 Electronic assembliesFree
• 8473.21.90.00 OtherFree

8473.29 Machinery; parts and accessories of the machines of item no. 8470.30. 8470.50 or 8470.90 (other than covers, carrying cases and the like)

• 8473.29.10.00 Electronic assembliesFree
• 8473.29.90.00 OtherFree

8473.30 Machinery; parts and accessories (other than covers, carrying cases and the like) of the machines of heading no. 8471

• 8473.30.20.00 Electronic assembliesFree
• 8473.30.80.00 OtherFree

8473.40 Machinery; parts and accessories (other than covers, carrying cases and the like) of the machines of heading no. 8472

• 8473.40.10.00 Electronic assembliesFree
• 8473.40.80.00 OtherFree

8473.50 Machines; parts and accessories (other than covers, carrying cases and the like) equally suitable for use with machines of two or more of the headings 8470 to 8472

• 8473.50.20.00 Electronic assembliesFree
• 8473.50.80.00 OtherFree

8474 Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores in solid form, shaping, moulding machinery for solid mineral fuels

8474.10 Machines; for sorting, screening, separating or washing earth, stone, ores or other mineral substances

• 8474.10.00.00 Sorting, screening, separating or washing machinesFree

8474.20 Machines; for crushing or grinding earth, stone, ores or other mineral substances

• 8474.20.00.00 Crushing or grinding machinesFree

8474.31 Machines; concrete or mortar mixers

• 8474.31.00.00 Concrete or mortar mixersFree

8474.32 Machines; for mixing mineral substances with bitumen

• 8474.32.00.00 Machines for mixing mineral substances with bitumenFree

8474.39 Machines; for mixing or kneading mineral substances, excluding concrete mixers and machines for mixing mineral substances with bitumen

• 8474.39.00.00 OtherFree

8474.80 Machines; for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials in powder or paste form, machines for forming foundry moulds of sand

• 8474.80.10.00 Machinery for agglomerating, shaping or moulding ceramic pasteFree
• 8474.80.90.00 OtherFree

8474.90 Machines, for sorting, screening, separating, washing, crushing etc mineral substances, for agglomerating, shaping or moulding solid fuels, ceramic pastes etc, for forming foundry moulds of sand; parts

• 8474.90.10.00 Of cast iron or cast steelFree
• 8474.90.90.00 OtherFree

8475 Machines; for assembling electric or electronic lamps, tubes, valves, flashbulbs, in glass envelopes, machines for manufacturing or hot working glass or glassware

8475.10 Machines; for assembling electric or electronic lamps, tubes, valves or flashbulbs, in glass envelopes

• 8475.10.00.00 Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes1.7%

8475.21 Machines; for manufacturing or hot working glass or glassware, for making optical fibres and preforms thereof

• 8475.21.00.00 Machines for making optical fibres and preforms thereofFree

8475.29 Machines; for manufacturing or hot working glass or glassware, not for making optical fibres and preforms thereof

• 8475.29.00.00 Other1.7%

8475.90 Machines; parts, of those for assembling electric or electronic lamps, tubes, valves or flash-bulbs, in glass envelopes and manufacturing or hot working glass or glassware

• 8475.90.10.00 Parts of machines of subheading 8475 21 00Free
• 8475.90.90.00 Other1.7%

8476 Automatic goods-vending machines (e.g. postage stamp, cigarette, food or beverage machines), including money-changing machines

8476.21 Machines; automatic beverage-vending machines, incorporating heating or refrigerating devices

• 8476.21.00.00 Incorporating heating or refrigerating devices1.7%

8476.29 Machines; automatic beverage-vending machines, not incorporating heating or refrigerating devices

• 8476.29.00.00 Other1.7%

8476.81 Machines; automatic goods-vending machines, (e.g. postage stamp, cigarette, food or money-changing machines, excluding beverage-vending machines), incorporating heating or refrigerating devices

• 8476.81.00.00 Incorporating heating or refrigerating devices1.7%

8476.89 Machines; automatic goods-vending machines, (e.g. postage stamp, cigarette, food or money-changing machines, excluding beverage-vending machines), not incorporating heating or refrigerating devices

• 8476.89.10.00 Money-changing machinesFree
• 8476.89.90.00 Other1.7%

8476.90 Machines; parts of automatic goods-vending machines

• 8476.90.10.00 Parts of money-changing machinesFree
• 8476.90.90.00 Other1.7%

8477 Machinery; for working rubber or plastics or for the manufacture of products from these materials, n.e.c. in this chapter

8477.10 Machinery; injection-moulding machines, for working rubber or plastics or for the manufacture of products from these materials

• 8477.10.00.00 Injection-moulding machines1.7%

8477.20 Machinery; extruders, for working rubber or plastics or for the manufacture of products from these materials

• 8477.20.00.00 Extruders1.7%

8477.30 Machinery; blow moulding machines, for working rubber or plastics or for the manufacture of products from these materials

• 8477.30.00.00 Blow-moulding machines1.7%

8477.40 Machinery; vacuum moulding machines and other thermoforming machines, for working rubber or plastics or for the manufacture of products from these materials

• 8477.40.00.00 Vacuum-moulding machines and other thermoforming machines1.7%

8477.51 Machinery; for moulding or retreading pneumatic tyres or for moulding or otherwise forming inner tubes

• 8477.51.00.00 For moulding or retreading pneumatic tyres or for moulding or otherwise forming inner tubes1.7%

8477.59 Machinery; for moulding or forming, for working rubber or plastics or for the manufacture of products from these materials, n.e.c. in this chapter

• 8477.59.10.00 Presses1.7%
• 8477.59.80.00 Other1.7%

8477.80 Machinery; for working rubber or plastics or for the manufacture of products from these materials, n.e.c. in this chapter

• Machines for the manufacture of foam products
• 8477.80.11.00 Machines for processing reactive resins1.7%
• 8477.80.19.00 Other1.7%
• Other
• 8477.80.91.00 Size reduction equipment1.7%
• 8477.80.93.00 Mixers, kneaders and agitators1.7%
• 8477.80.95.00 Cutting, splitting and peeling machines1.7%
• Other
• 8477.80.99.10 Machines for casting or for surface modification of plastic membranes of heading 39211.7%
• 8477.80.99.90 Other1.7%

8477.90 Machinery; parts of the machines of heading no. 8477, n.e.c. in item no. 8477.90

• 8477.90.10.00 Of cast iron or cast steel1.7%
• 8477.90.80.00 Other1.7%

8478 Machinery; for preparing or making up tobacco, n.e.c. in this chapter

8478.10 Machinery; for preparing or making up tobacco, n.e.c. in this chapter

• 8478.10.00.00 Machinery1.7%

8478.90 Machinery; parts of those for preparing or making up tobacco, n.e.c. in this chapter

• 8478.90.00.00 Parts1.7%

8479 Machinery and mechanical appliances; having individual functions, n.e.c. in this chapter

8479.10 Machinery and mechanical appliances; for public works, building or the like

• 8479.10.00.00 Machinery for public works, building or the likeFree

8479.20 Machinery; for the extraction or preparation of animal or fixed vegetable or microbial fats or oils

• 8479.20.00.00 Machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils1.7%

8479.30 Machinery and mechanical appliances; presses for the manufacture of particle or fibre building board of wood or other ligneous materials and other machinery for treating wood or cork

• 8479.30.10.00 Presses1.7%
• 8479.30.90.00 Other1.7%

8479.40 Machines; for making rope or cable

• 8479.40.00.00 Rope- or cable-making machines1.7%

8479.50 Machinery and mechanical appliances; industrial robots, n.e.c. or included

• 8479.50.00.00 Industrial robots, not elsewhere specified or included1.7%

8479.60 Machinery and mechanical appliances; evaporative air coolers

• 8479.60.00.00 Evaporative air coolers1.7%

8479.71 Machinery and mechanical appliances; passenger boarding bridges, of a kind used in airports

• 8479.71.00.00 Of a kind used in airports1.7%

8479.79 Machinery and mechanical appliances; passenger boarding bridges, other than of a kind used in airports

• 8479.79.00.00 Other1.7%

8479.81 Machines and mechanical appliances; for treating metal, including electric wire coil-winders

• 8479.81.00.00 For treating metal, including electric wire coil-winders1.7%

8479.82 Machines; for mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring

• 8479.82.00.00 Mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring machines1.7%

8479.83 Machines and mechanical appliances; cold isostatic presses

• 8479.83.00.00 Cold isostatic presses1.7%

8479.89 Machines and mechanical appliances; having individual functions, n.e.c. or included in this chapter

• 8479.89.30.00 Mobile hydraulic-powered mine roof supports1.7%
• 8479.89.60.00 Central greasing systems1.7%
• 8479.89.70.00 Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assembliesFree
• Other
• 8479.89.97.10 The following goods, for use in civil aircraft : Hydropneumatic batteries; Mechanical actuators for thrust reversers; Toilet units specially designed; Air humidifiers and dehumidifiers; Servo-mechanisms, non-electric; Non-electric starter motors; Pneumatic starters for turbo-jets, turbopropellers and other gas turbines; Windscreen wipers, non-electric; Propeller regulators, non-electricFree
• 8479.89.97.28 Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with: electronic brake assistants; hydraulic unit driven by brushless electric motor; brake fluid reservoir; for use in the manufacture of hybrid passenger cars1.7%
• 8479.89.97.33 Pre-assembled process module unit of an ethane cracker unit, containing: various distillation columns (depropanizer, debutanizer and degreenoiler) and their associated heat exchangers, pumps and drums; a chilling train containing heat exchangers and a drum which condenses C2 in a gas stream; a system to separate hydrogen and methane from cracked gas containing heat exchangers, drums, turbines, compressors and a hydrogen purification unit (pressure swing adsorption unit); associated equipment of a C3 splitter distillation column, containing heat exchanger, pumps and drums, and a vinyl acetylene hydrogenation system, containing hydrogenation reactors, filters, mixer, drum, condenser, heat exchangers1.7%
• 8479.89.97.38 Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of: a length of 110 mm or more but not more than 140 mm; a width of 90 mm or more but not more than 130 mm; a height of 80 mm or more but not more than 110 mm; for use in the manufacture of engines of motor vehicles1.7%
• 8479.89.97.43 Pre-assembled process module unit of an ethane cracker unit, containing: a system for filtering and cooling of dried cracked gas; a deethanizer distillation column and associated equipment for C2-/C3+ separation; an acetylene hydrogenation system to remove acetylene within a C2 stream; a fuel gas drum that stores fuel gas for cracker furnaces, and a system to regenerate dryers in a cracker installation1.7%
• 8479.89.97.60 Bioreactor for biopharmaceutical cell culture: having interior surfaces of austenitic stainless steel, and with a process capacity up to 15 000 litres; whether or not combined with a “clean-in-process” system and/or a dedicated paired media hold vessel1.7%
• 8479.89.97.90 Other1.7%

8479.90 Machines and mechanical appliances; parts, of those having individual functions

• 8479.90.15.00 Parts of machines of subheading 8479 89 70Free
• Other
• Of cast iron or cast steel
• 8479.90.20.10 For use in civil aircraftFree
• 8479.90.20.90 Other1.7%
• Other
• 8479.90.70.10 For use in civil aircraftFree
• Other
• 8479.90.70.30 Silicone or plastic keyboards, comprising: parts of common metal, and whether or not comprising parts of plastic; epoxy resin reinforced with fiberglass or wood; whether or not printed or surface-treated; with or without electrical conductors; with or without a membrane bonded to the keyboard; with or without mono or multilayer protective film1.7%
• 8479.90.70.40 Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft: of a circular shape; made of steel alloy with sintering process; with not more than 8 oil chambers; with a Rockwell hardness of 55 or more; with a density of 6,5 g/cm³, or more, but not more than 6,7 g/cm³1.7%
• 8479.90.70.60 High-pressure seamless cylinders for compressed or liquefied gas, of steel, of all diameters and volume capacities, whether or not threaded, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders’ fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle1.7%
• 8479.90.70.85 Injectors with solenoid valve for optimised atomisation in the engine combustion chamber1.7%
• 8479.90.70.99 Other1.7%

8480 Moulding boxes for metal foundry, moulding patterns, moulds for metals (excluding ingot moulds), metal carbides, glass, mineral materials, rubber or plastics

8480.10 Moulding boxes; for metal foundry

• 8480.10.00.00 Moulding boxes for metal foundry1.7%

8480.20 Mould bases; for metal, metal carbides, glass, mineral materials, rubber or plastics

• 8480.20.00.00 Mould bases1.7%

8480.30 Moulding patterns; of metal, metal carbides, glass, mineral materials, rubber or plastics

• 8480.30.10.00 Of wood1.7%
• 8480.30.90.00 Other2.7%

8480.41 Moulds; for metal or metal carbides, injection or compression types

• 8480.41.00.00 Injection or compression types1.7%

8480.49 Moulds; for metal or metal carbides, other than injection or compression types

• 8480.49.00.00 Other1.7%

8480.50 Moulds; for glass

• 8480.50.00.00 Moulds for glass1.7%

8480.60 Moulds; for mineral materials

• 8480.60.00.00 Moulds for mineral materials1.7%

8480.71 Moulds; for rubber or plastics, injection or compression types

• 8480.71.00.00 Injection or compression types1.7%

8480.79 Moulds; for rubber or plastics, other than injection or compression types

• 8480.79.00.00 Other1.7%

8481 Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves

8481.10 Valves; pressure reducing, for pipes, boiler shells, tanks, vats or the like

• Combined with filters or lubricators
• 8481.10.05.10 For use in certain types of aircraft2.2%
• 8481.10.05.90 Other2.2%
• Other
• Of cast iron or of steel
• 8481.10.19.10 For use in certain types of aircraft2.2%
• 8481.10.19.90 Other2.2%
• Other
• 8481.10.99.10 For use in certain types of aircraft2.2%
• 8481.10.99.40 Pressure reducing valves in a brass case with: a length of not more than 30 mm (± 1 mm); a width of not more than 18 mm (± 1 mm); of a kind used for incorporation in fuel delivery modules of motor vehicles2.2%
• 8481.10.99.90 Other2.2%

8481.20 Valves; for oleohydraulic or pneumatic transmissions

• Valves for the control of oleohydraulic power transmission
• 8481.20.10.20 For use in certain types of aircraft2.2%
• 8481.20.10.90 Other2.2%
• Valves for the control of pneumatic power transmission
• 8481.20.90.20 For use in certain types of aircraft2.2%
• 8481.20.90.90 Other2.2%

8481.30 Valves; check (nonreturn) valves, for pipes, boiler shells, tanks, vats or the like

• Of cast iron or of steel
• 8481.30.91.20 For use in certain types of aircraft2.2%
• Other
• 8481.30.91.30 Mechanical check (non-return) valve for opening and closing of the flow of fuel: with an operating pressure of not more than 250 MPa; with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute; with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm; made of steel2.2%
• 8481.30.91.91 Steel check (non-return) valves with: an opening pressure of not more than 800 kPa; an external diameter not more than 37 mm2.2%
• 8481.30.91.99 Other2.2%
• Other
• 8481.30.99.20 For use in certain types of aircraft2.2%
• 8481.30.99.50 Mechanical check (non-return) valve for opening and closing of the flow of fuel: with an operating pressure of not more than 250 MPa; with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute; with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm; made of steel2.2%
• 8481.30.99.90 Other2.2%

8481.40 Valves; safety or relief valves, for pipes, boiler shells, tanks, vats or the like

• Of cast iron or of steel
• 8481.40.10.50 For use in certain types of aircraft2.2%
• 8481.40.10.90 Other2.2%
• Other
• 8481.40.90.10 For use in certain types of aircraft2.2%
• 8481.40.90.90 Other2.2%

8481.80 Taps, cocks, valves and similar appliances; for pipes, boiler shells, tanks, vats or the like, including thermostatically controlled valves

• Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures
• Mixing valves
• 8481.80.11.10 For use in certain types of aircraft2.2%
• 8481.80.11.90 Other2.2%
• Other
• 8481.80.19.10 For use in certain types of aircraft2.2%
• 8481.80.19.90 Other2.2%
• Central heating radiator valves
• 8481.80.31.00 Thermostatic valves2.2%
• 8481.80.39.00 Other2.2%
• Valves for pneumatic tyres and inner tubes
• 8481.80.40.10 For use in certain types of aircraft2.2%
• 8481.80.40.90 Other2.2%
• Other
• Process control valves
• 8481.80.51.00 Temperature regulators2.2%
• Other
• 8481.80.59.20 Pressure regulating valve for incorporation into compressors of motor vehicle air condition units2.2%
• 8481.80.59.30 Two-way flow control valve with housing, with: at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter; at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate; at least 19, but not more than 300 MPa operating pressure2.2%
• 8481.80.59.40 Flow-control valve: made of steel; with an outlet hole with a diameter of at least 0,05mm or more, but not more than 0,5 mm; with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm; with chromium nitride coating; with a surface roughness of Rp 0,42.2%
• 8481.80.59.50 Electromagnetic valve for quantity control with: a plunger; a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2 Ohm2.2%
• 8481.80.59.60 Electromagnetic valve for quantity control: with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH2.2%
• 8481.80.59.70 Flow-control valve: made of steel; with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm; with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm2.2%
• 8481.80.59.80 Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump: with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector; with an operating pressure of not more than 5.5 bar; with an operating voltage of 9 VDC or more but not more than 16 VDC; with a valve's base width of 22 mm or more but not more than 27 mm; with a valve's length of 55 mm or more but not more than 110 mm; for use in the manufacture of motor vehicle engines2.2%
• 8481.80.59.90 Other2.2%
• Other
• Gate valves
• 8481.80.61.00 Of cast iron2.2%
• Of steel
• 8481.80.63.50 For use in certain types of aircraft2.2%
• 8481.80.63.90 Other2.2%
• Other
• 8481.80.69.50 For use in certain types of aircraft2.2%
• Other
• 8481.80.69.60 Four-way reversing valve for refrigerants, consisting of: a solenoid pilot valve; a brass valve body including valve slider and copper connections; with a working pressure up to 4,5 MPa2.2%
• 8481.80.69.99 Other2.2%
• Globe valves
• 8481.80.71.00 Of cast iron2.2%
• Of steel
• 8481.80.73.10 For use in certain types of aircraft2.2%
• 8481.80.73.20 Pressure- and flow-control valve controlled by external electromagnet: made of steel and/or steel alloy(s); without integrated circuit; of not more than 1000 kPa operating pressure; with a flow quantity of not more than 5 l/min; without an electromagnet2.2%
• 8481.80.73.90 Other2.2%
• Other
• 8481.80.79.10 For use in certain types of aircraft2.2%
• 8481.80.79.40 Service valve which suits for R410A or R32 gas while connecting indoor and outdoor units with: a withstanding pressure of the valve body of 6,3 MPa; a leakage ratio of less than 1.6 g/a; an impurity ratio of less than 1.2 mg/PCS; an airtight pressure of the valve body of 4.2 Mpa; for use in the manufacture of air conditioners2.2%
• 8481.80.79.90 Other2.2%
• Ball and plug valves
• 8481.80.81.30 For use in certain types of aircraft2.2%
• 8481.80.81.90 Other2.2%
• Butterfly valves
• 8481.80.85.30 For use in certain types of aircraft2.2%
• 8481.80.85.90 Other2.2%
• Diaphragm valves
• 8481.80.87.30 For use in certain types of aircraft2.2%
• 8481.80.87.90 Other2.2%
• Other
• 8481.80.99.40 For use in certain types of aircraft2.2%
• 8481.80.99.70 Pressure- and flow-control valve controlled by external electromagnet: made of steel and/or steel alloy(s); without integrated circuit; of not more than 1000 kPa operating pressure; with a flow quantity of not more than 5 l/min; without an electromagnet2.2%
• 8481.80.99.80 Solenoid valve for combustion engine continuous variable valve timing system to control oil flow as a function of engine speed and load: in metal cover; with electrical connector; with a force of not more than 10 N; with an operating voltage of 9 VDC or more but not more than 16 VDC; with a length of 80 mm or more but not more than 110 mm; with a width of 80 mm or more but not more than 110 mm; with a height of 20 mm or more but not more than 30 mm; for use in the manufacture of engines of motor vehicles2.2%
• 8481.80.99.90 Other2.2%

8481.90 Taps, cocks, valves and similar appliances; parts thereof

• 8481.90.00.10 For use in certain types of aircraft2.2%
• 8481.90.00.25 Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation systems, comprising the following features: high-pressure die-cast aluminium EN AC-46000; shot-blasted and machined; height of 100 mm or more but not exceeding 135 mm; width of 115 mm or more but not exceeding 150 mm; weight of 210 g or more but not more than 500 g2.2%
• 8481.90.00.40 Valve armature: for the opening and closing of the flow of fuel; consisting of a shaft and a blade; with at least 3 but not more than 8 holes on the blade; made of metal and/or metal alloy(s)2.2%
• 8481.90.00.50 Silicone or plastic keyboards, comprising: parts of common metal, and whether or not comprising parts of plastic; epoxy resin reinforced with fiberglass or wood; whether or not printed or surface-treated; with or without electrical conductors; with or without a membrane bonded to the keyboard; with or without mono or multilayer protective film2.2%
• 8481.90.00.60 Nozzle body for the regulation of angle and distribution of fuel injection: of a cylindrical shape; made of stainless steel; with 4 or more, but not more than 16 holes; with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute2.2%
• 8481.90.00.70 Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes; -4 grooves: a diameter of 3 mm or more, but not more than 6 mm; a length of 25 mm or more, but not more than 35 mm; made of stainless steel with hard-chrome plating2.2%
• 8481.90.00.80 Flow-control valve: made of steel; with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm; with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm2.2%
• 8481.90.00.90 Other2.2%

8482 Ball or roller bearings

8482.10 Ball bearings

• With greatest external diameter not exceeding 30 mm
• 8482.10.10.15 Ball bearings with: an internal diameter of 4 mm or more but not more than 9 mm; an external diameter of not more than 26 mm; a width of not more than 8 mm; for use in the manufacture of electromotors with a range of 40 000 rpm or more but not more than 80 000 rpm8%
• 8482.10.10.90 Other8%
• 8482.10.90.00 Other8%

8482.20 Bearings; tapered roller bearings, including cone and tapered roller assemblies

• 8482.20.00.00 Tapered roller bearings, including cone and tapered roller assemblies8%

8482.30 Bearings; spherical roller bearings

• 8482.30.00.00 Spherical roller bearings8%

8482.40 Bearings; needle roller bearings, including cage and needle roller assemblies

• 8482.40.00.00 Needle roller bearings, including cage and needle roller assemblies8%

8482.50 Bearings; cylindrical roller bearings, including cage and roller assemblies n.e.c. in heading no. 8482

• 8482.50.00.20 Axial roller bearing made of steel: the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98; the rollers are made of anti-friction steel according to ASTM 295-94; with an external diameter of 63 mm or more but not more than 66 mm; with an internal diameter of 44 mm or more but not more than 46 mm; with a weight of 23 g or more but not more than 27 g; with 36 rollers or more but not more than 38 rollers8%
• 8482.50.00.90 Other8%

8482.80 Bearings; n.e.c. in heading no. 8482, including combined ball/roller

• 8482.80.00.10 Connecting components for use in the production of helicopter tail rotor shafts8%
• 8482.80.00.90 Other8%

8482.91 Bearings; parts, balls, needles and rollers

• 8482.91.10.00 Tapered rollers8%
• Other
• 8482.91.90.10 Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm: made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290); with a deviation of 0,5 mm or less as determined with the FBHmethod; for use in wind turbine industry7.7%
• 8482.91.90.90 Other7.7%

8482.99 Bearings; parts, (other than balls, needles and rollers)

• 8482.99.00.30 Brass cages with the following characteristics: continuously or centrifugally cast; turned; containing by weight 35 % or more, but not more than 38 % of zinc; containing by weight 0,75 % or more, but not more than 1,25 % of lead; containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and with a tensile strength of 415 Pa or more; of a kind used for the manufacture of ball bearings8%
• 8482.99.00.60 Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of: ­ 14 mm or more but not more than 77 mm for the inner ring; ­ 26 mm or more but not more than 101 mm for the outer ring for use in the manufacture of bearings8%
• 8482.99.00.70 Male and female parts of cages: made of flat-rolled steel; with a diameter of 14,5 mm or more but not more than 420 mm; the male part including rivets; the female part including holes; used for manufacturing of deep grove ball bearings8%
• 8482.99.00.80 Punched cages of various diameters: made of flat rolled steel; with tensile strength of 270 MPa or more; for the production of tapered roller bearings8%
• 8482.99.00.90 Other8%

8483 Transmission shafts (including cam and crank) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers; flywheels and pulleys; clutches and shaft couplings

8483.10 Transmission shafts (including cam shafts and crank shafts) and cranks

• Cranks and crank shafts
• Of cast iron or cast steel
• 8483.10.21.10 For use in civil aircraft—
• 8483.10.21.90 Other4%
• Of open-die forged steel
• 8483.10.25.10 For use in civil aircraft—
• 8483.10.25.90 Other4%
• Other
• 8483.10.29.10 For use in civil aircraft—
• 8483.10.29.90 Other4%
• Articulated shafts
• 8483.10.50.10 For use in civil aircraft—
• 8483.10.50.90 Other4%
• Other
• 8483.10.95.10 For use in civil aircraft—
• 8483.10.95.30 Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with: external toothing in a diametral pitch standard; -17 teeth or more, but not more than 50 teeth: a diameter of 35 mm or more, but not more than 145 mm; a length of 200 mm or more, but not more than 1345 mm; a hardness of 35 HRC or more, but not more than 45 HRC4%
• 8483.10.95.40 Stepped shaft made of carbon steel with: rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15,5' but not more than 0° 21,5'; a largest diameter of 16 mm or more, but not more than 18 mm; a length of 137 mm or more, but not more than 155 mm; a weight of 0,12 kg or more, but not more than 0,28 kg4%
• 8483.10.95.50 Drum shaft for torque transmission, in steel (to SM45C for shaft standard and STS430 for ring standard) with: a length of 137,8 mm or more but not more than 138,2 mm; an outer diameter of 23 mm or more but not more than 48,025 mm; a weight of 1,0245 kg or more but not more than 1,0445 kg; a hardness of the shaft of 40 or more on the Rockwell C hardness scale (HRC), but not more than 50 HRC; a ring hardness of 90 or more on the Rockwell B hardness scale (HRB), but not more than 120 HRB; an external 37-teeth spline with major diameter of 41 mm or more but not more than 48 mm4%
• 8483.10.95.90 Other4%

8483.20 Bearing housings, incorporating ball or roller bearings

• 8483.20.00.00 Bearing housings, incorporating ball or roller bearings6%

8483.30 Bearing housings, not incorporating ball or roller bearings and plain shaft bearings

• Bearing housings
• For ball or roller bearings
• 8483.30.32.10 For use in civil aircraft—
• 8483.30.32.30 Bearing housing of a kind used in turbochargers: of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560; with oil chambers; without bearings; with a diameter of 50 mm or more, but not more than 250 mm; with a height of 40 mm or more, but not more than 150 mm; whether or not with water chambers and connectors5.7%
• 8483.30.32.90 Other5.7%
• Other
• 8483.30.38.10 For use in civil aircraft—
• Other
• 8483.30.38.60 Bearing housing of a kind used in turbochargers: of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560; with oil chambers; without bearings; with a diameter of 50 mm or more, but not more than 250 mm; with a height of 40 mm or more, but not more than 150 mm; whether or not with water chambers and connectors3.4%
• 8483.30.38.99 Other3.4%
• Plain shaft bearings
• 8483.30.80.10 For use in civil aircraft—
• 8483.30.80.30 Commutator end shield (bearing housing with plain shaft bearing) for starter motors of passenger cars and commercial vehicles: produced with high pressure precision die casting technology; made of aluminium alloy (EN AC-46000 or EN AC-46000 S, according to the DIN EN 1706 and GB/T 16116 standards); with sintered plain bearing3.4%
• 8483.30.80.90 Other3.4%

8483.40 Gears and gearing; (not toothed wheels, chain sprockets and other transmission elements presented separately); ball or roller screws; gear boxes and other speed changers, including torque converters

• Gears and gearing (other than friction gears)
• Spur and helical
• 8483.40.21.10 For use in civil aircraft—
• 8483.40.21.90 Other3.7%
• Bevel and bevel/spur
• 8483.40.23.10 For use in civil aircraft—
• 8483.40.23.20 Bevel gear: made of lightweight alloys and steel; built on straight or helical bevel gears; with an angle between the shafts of 30 degrees or more but not more than 90 degrees; with a gear 1:1,3 ratio or more but not more than 1:1,46; for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery3.7%
• 8483.40.23.30 Bevel gear: made of lightweight alloys and steel; built on straight bevel gears; with an angle between the shafts of 24 degrees or more but not more than 35 degrees; for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery3.7%
• 8483.40.23.90 Other3.7%
• Worm gear
• 8483.40.25.10 For use in civil aircraft—
• 8483.40.25.20 Worm gearbox: in an aluminium alloy housing; with a plastic or steel worm; with mounting holes; with a 90 degree reversible drive direction; with a 4:19 transmission ratio; equipped with a lead screw with a length of 310 mm or more but not more than 380 mm; with a guide nut incorporated into the assembly bracket; with or without a lead screw support; for indirect connection to the drive motor of a car seat guide system3.7%
• 8483.40.25.90 Other3.7%
• Other
• 8483.40.29.10 For use in civil aircraft—
• Other
• 8483.40.29.50 Gear set of cycloid gear type with: a rated torque of 50 Nm or more but not more than 9 000 Nm; standard ratios of 1:50 or more but not more than 1:475; lost motion of not more than one arc minute; an efficiency of more than 80 %; of a kind used in robot arms3.7%
• 8483.40.29.60 Epicyclic gearing, of a kind used in driving hand-held power tools with: a rated torque of 25 Nm or more, but not more than 70 Nm; standard gear ratios of 1:12.7 or more, but not more than 1:65.33.7%
• 8483.40.29.70 Cast steel planetary cage, with: external or internal toothing in a diametral pitch standard; -27 teeth or more, but not more than 70 teeth: a diameter of 300 mm or more, but not more than 725 mm; a length of 225 mm or more, but not more than 800 mm; -3 or 4 planetary gears: a hardness of 40 HRC or more, but not more than 45 HRC3.7%
• 8483.40.29.89 Other3.7%
• Ball or roller screws
• 8483.40.30.10 For use in civil aircraft—
• 8483.40.30.90 Other3.7%
• Gear boxes and other speed changers
• Gear boxes
• 8483.40.51.10 For use in civil aircraft—
• 8483.40.51.90 Other3.7%
• Other
• 8483.40.59.10 For use in civil aircraft—
• 8483.40.59.30 Hydrostatic speed changer: with a hydro pump and a differential with wheel axle; whether or not with a fan impeller and/or a pulley; for use in the manufacture of lawn mowers of subheadings 8433 11 and 8433 19 or other mowers of subheading 8433 203.7%
• 8483.40.59.90 Other3.7%
• Other
• 8483.40.90.10 For use in civil aircraft—
• 8483.40.90.80 Transmission gearbox, with: not more than 3 gears; an automatic deceleration system and a power reversal system; for use in the manufacture of goods of heading 84273.7%
• 8483.40.90.99 Other3.7%