8503 Electric motors and generators; parts suitable for use solely or principally with the machines of heading no. 8501 or 8502

8503.00 Electric motors and generators; parts suitable for use solely or principally with the machines of heading no. 8501 or 8502

• Non-magnetic retaining rings
• 8503.00.10.10 For use in certain types of aircraft2.7%
• 8503.00.10.90 Other2.7%
• Steel laminations and stator and rotor cores, whether or not stacked
• 8503.00.20.10 For use in certain types of aircraft2.7%
• 8503.00.20.20 Plated steel core of the electric motor rotor of electric air conditioning compressors for motor vehicles: with an outer diameter of 65 mm or more but not more than 80 mm; with an inner diameter of 15 mm or more but not more than 25 mm; with a height of 30 mm or more but not more than 45 mm; with a weight of 0,5 kg or more but not more than 0,8 kg; without windings2.7%
• 8503.00.20.30 Plated steel core of the electric motor stator of electric air conditioning compressors for motor vehicles: with an outer diameter of 90 mm or more but not more than 120 mm; with an inner diameter of 65 mm or more but not more than 80 mm; with a height of 30 mm or more but not more than 45 mm; with a weight of 0,7 kg or more but not more than 1,2 kg; without windings2.7%
• 8503.00.20.90 Other2.7%
• Other
• Of cast iron or cast steel
• 8503.00.91.10 For use in certain types of aircraft2.7%
• Other
• 8503.00.91.31 Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing2.7%
• 8503.00.91.99 Other2.7%
• Other
• 8503.00.98.10 For use in certain types of aircraft2.7%
• Other
• 8503.00.98.32 Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing2.7%
• 8503.00.98.33 Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm2.7%
• 8503.00.98.37 Rotor for electric motor, with the rotor cylindrical body made of agglomerated ferrite or sintered neodymium or plastoneodymium, with or without metal shaft and with or without plastic elements: diameter of the rotor body of 15mm or more but not more than 37mm; length of the rotor body of 12mm or more but not more than 36mm2.7%
• 8503.00.98.40 Pressure casted inner housing of a cooling channel system for an electrical motor: of EN AC-47100 aluminum; shot-blasted and machined; leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure; with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506); with a tensile strength of 190 N/mm² or more; with a height of 160 mm or more, but not more than 330 mm; with a diameter of 240 mm or more, but not more than 368 mm; with a weight of 3 kg or more, but not more than 5,84 kg2.7%
• 8503.00.98.43 Silicone or plastic keyboards, comprising: parts of common metal, and whether or not comprising parts of plastic; epoxy resin reinforced with fiberglass or wood; whether or not printed or surface-treated; with or without electrical conductors; with or without a membrane bonded to the keyboard; with or without mono or multilayer protective film2.7%
• 8503.00.98.45 Armature for the electric motor in starter motors of passenger cars and commercial vehicles with: an outer diameter of 52 mm or more but not more than 80 mm; a commutator copper wire diameter of 2 mm or more but not more than 4 mm2.7%
• 8503.00.98.53 Pressure casted rotor cover of the cooling channel system in the electrical motor: of EN AC-47100-F aluminum; with a sealing cap of stainless steel; shot-blasted and machined; leakproof to the degree of 1ml per minute or less under 2,75 bar pressure; with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506); with a tensile strength of 190 N/mm² or more; with a height of 42mm or more, but not more than 64mm; with a diameter of 88mm or more, but not more than 132mm; with a weight of 0,3kg or more, but not more than 0,5kg2.7%
• 8503.00.98.55 Stator for brushless motor, with: an internal diameter of 206,6 mm (± 0,5); an external diameter of 265,0 mm (± 0,2) and a width of 37,2 mm or more but not more than 47,8 mm; of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums2.7%
• 8503.00.98.63 Pressure casted outer housing of an electrical motor: of EN AC-47100 aluminum; with or without overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel; shot-blasted and machined; with or without a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure; with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506); with a tensile strength of 190 N/mm² or more; with a height of 195mm or more, but not more than 430mm; with a width of 290mm or more, but not more than 625mm; with a length of 270mm or more, but not more than 535mm; with a weight of 5,2kg or more, but not more than 12,5kg2.7%
• 8503.00.98.73 Pressure die-cast electric motor stator housing: of EN AC-46000 aluminium; shot-blasted and machined; with a height of 70 mm or more but not more than 76 mm; with a width of 155 mm or more but not more than 162 mm; with a weight of 330 g or more but not more than 360 g2.7%
• 8503.00.98.75 Stator body of stacked electrical sheet having: an inner diameter of 18 mm or more, but not more than 35 mm; an outer diameter of 35 mm or more, but not more than 65 mm, and a length of 20 mm or more, but not more than 65 mm; whether or not incorporated in a housing2.7%
• 8503.00.98.99 Other2.7%