8503 Electric motors and generators; parts suitable for use solely or principally with the machines of heading no. 8501 or 8502

8503.00 Electric motors and generators; parts suitable for use solely or principally with the machines of heading no. 8501 or 8502

• Non-magnetic retaining rings
• 8503.00.10.10 For use in certain types of aircraft2%
• 8503.00.10.90 Other2%
• Steel laminations and stator and rotor cores, whether or not stacked
• 8503.00.20.10 For use in certain types of aircraft2%
• 8503.00.20.20 Plated steel core of the electric motor rotor of electric air conditioning compressors for motor vehicles: -with an outer diameter of 65 mm or more but not more than 80 mm, -with an inner diameter of 15 mm or more but not more than 25 mm, -with a height of 30 mm or more but not more than 45 mm, -with a weight of 0,5 kg or more but not more than 0,8 kg, -without windings2%
• 8503.00.20.30 Plated steel core of the electric motor stator of electric air conditioning compressors for motor vehicles: -with an outer diameter of 90 mm or more but not more than 120 mm, -with an inner diameter of 65 mm or more but not more than 80 mm, -with a height of 30 mm or more but not more than 45 mm, -with a weight of 0,7 kg or more but not more than 1,2 kg, -without windings2%
• 8503.00.20.90 Other2%
• Other
• Of cast iron or cast steel
• 8503.00.91.10 For use in certain types of aircraft2%
• Other
• 8503.00.91.31 Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing2%
• 8503.00.91.99 Other2%
• Other
• 8503.00.98.10 For use in certain types of aircraft2%
• Other
• 8503.00.98.32 Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing2%
• 8503.00.98.33 Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm2%
• 8503.00.98.37 Rotor for electric motor, with the rotor cylindrical body made of agglomerated ferrite or sintered neodymium or plastoneodymium, with or without metal shaft and with or without plastic elements: - diameter of the rotor body of 15mm or more but not more than 37mm, - length of the rotor body of 12mm or more but not more than 36mm2%
• 8503.00.98.40 Pressure casted inner housing of a cooling channel system for an electrical motor: -of en ac-47100 aluminum, -shot-blasted and machined, -leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, -with a hardness of 70 or more on the hardness brinell wolfram (hbw) scale (2,5/62,5, according to iso 6506), -with a tensile strength of 190 n/mm² or more, -with a height of 160 mm or more, but not more than 330 mm, -with a diameter of 240 mm or more, but not more than 368 mm, -with a weight of 3 kg or more, but not more than 5,84 kg2%
• 8503.00.98.43 Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film2%
• 8503.00.98.45 Armature for the electric motor in starter motors of passenger cars and commercial vehicles with: -an outer diameter of 52 mm or more but not more than 80 mm, -a commutator copper wire diameter of 2 mm or more but not more than 4 mm2%
• 8503.00.98.53 Pressure casted rotor cover of the cooling channel system in the electrical motor: - of en ac-47100-f aluminum, - with a sealing cap of stainless steel, - shot-blasted and machined, - leakproof to the degree of 1ml per minute or less under 2,75 bar pressure, - with a hardness of 70 hbw or more (2,5/62,5, according to iso 6506), - with a tensile strength of 190 n/mm² or more, - with a height of 42mm or more, but not more than 64mm, - with a diameter of 88mm or more, but not more than 132mm, - with a weight of 0,3kg or more, but not more than 0,5kg2%
• 8503.00.98.55 Stator for brushless motor, with: -an internal diameter of 206,6 mm (± 0,5) -an external diameter of 265,0 mm (± 0,2) and -a width of 37,2 mm or more but not more than 47,8 mm of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums2%
• 8503.00.98.63 Pressure casted outer housing of an electrical motor: - of en ac-47100 aluminum, - with or without overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel, - shot-blasted and machined, - with or without a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, - with a hardness of 70 or more on the hardness brinell wolfram (hbw) scale (2,5/62,5, according to iso 6506), - with a tensile strength of 190 n/mm² or more, - with a height of 195mm or more, but not more than 430mm, - with a width of 290mm or more, but not more than 625mm, - with a length of 270mm or more, but not more than 535mm, - with a weight of 5,2kg or more, but not more than 12,5kg2%
• 8503.00.98.73 Pressure die-cast electric motor stator housing: -of en ac-46000 aluminium, -shot-blasted and machined, -with a height of 70 mm or more but not more than 76 mm, -with a width of 155 mm or more but not more than 162 mm, -with a weight of 330 g or more but not more than 360 g2%
• 8503.00.98.75 Stator body of stacked electrical sheet having: -an inner diameter of 18 mm or more, but not more than 35 mm, -an outer diameter of 35 mm or more, but not more than 65 mm, and -a length of 20 mm or more, but not more than 65 mm -whether or not incorporated in a housing2%
• 8503.00.98.99 Other2%