Book a demo

72 Iron and steel

UK Global Tariff · MFN rates

Chapter 71Chapter 73

7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms

7201.10 Iron; non-alloy pig iron containing by weight 0.5% or less of phosphorus, in pigs, blocks or other primary forms

  • Containing by weight not less than 0,4 % of manganese
  • Containing by weight 1 % or less of silicon
  • 7201.10.11.10 Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mmFree
  • 7201.10.11.90 OtherFree
  • 7201.10.19.00 Containing by weight more than 1 % of siliconFree
  • Containing by weight not less than 0,1 % but less than 0,4 % of manganese
  • 7201.10.30.10 Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of siliconFree
  • 7201.10.30.90 OtherFree
  • 7201.10.90.00 Containing by weight less than 0,1 % of manganeseFree

7201.20 Iron; non-alloy pig iron containing by weight more than 0.5% of phosphorus, in pigs, blocks or other primary forms

  • 7201.20.00.00 Non-alloy pig iron containing by weight more than 0,5 % of phosphorusFree

7201.50 Iron; alloy pig iron; spiegeleisen, in pigs, blocks or other primary forms

  • 7201.50.10.00 Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadiumFree
  • 7201.50.90.00 OtherFree

7202 Ferro-alloys

7202.11 Ferro-alloys; ferro-manganese, containing by weight more than 2% of carbon

  • 7202.11.20.00 With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 %Free
  • 7202.11.80.00 OtherFree

7202.19 Ferro-alloys; ferro-manganese, containing by weight 2% or less of carbon

  • 7202.19.00.00 OtherFree

7202.21 Ferro-alloys; ferro-silicon, containing by weight more than 55% of silicon

  • 7202.21.00.00 Containing by weight more than 55 % of siliconFree

7202.29 Ferro-alloys; ferro-silicon, containing by weight 55% or less of silicon

  • 7202.29.10.00 Containing by weight 4 % or more but not more than 10 % of magnesiumFree
  • 7202.29.90.00 OtherFree

7202.30 Ferro-alloys; ferro-silico-manganese

  • 7202.30.00.00 Ferro-silico-manganeseFree

7202.41 Ferro-alloys; ferro-chromium, containing by weight more than 4% of carbon

  • 7202.41.10.00 Containing by weight more than 4 % but not more than 6 % of carbonFree
  • 7202.41.90.00 Containing by weight more than 6 % of carbonFree

7202.49 Ferro-alloys; ferro-chromium, containing by weight 4% or less of carbon

  • Containing by weight not more than 0,05 % of carbon
  • 7202.49.10.20 Containing by weight more than 30 % but not more than 90 % of chromium (super-refined ferrochromium)Free
  • 7202.49.10.90 OtherFree
  • Containing by weight more than 0,05 % but not more than 0,5 % of carbon
  • With a chromium content by weight of 30% and more
  • 7202.49.50.11 Containing by weight not more than 0,1 % of carbon and more than 30 % but not more than 90 % of chromium (super-refined ferrochromium)Free
  • 7202.49.50.19 OtherFree
  • 7202.49.50.90 OtherFree
  • 7202.49.90.00 Containing by weight more than 0,5 % but not more than 4 % of carbonFree

7202.50 Ferro-alloys; ferro-silico-chromium

  • 7202.50.00.00 Ferro-silico-chromiumFree

7202.60 Ferro-alloys; ferro-nickel

  • 7202.60.00.00 Ferro-nickelFree

7202.70 Ferro-alloys; ferro-molybdenum

  • 7202.70.00.00 Ferro-molybdenumFree

7202.80 Ferro-alloys; ferro-tungsten and ferro-silico-tungsten

  • 7202.80.00.00 Ferro-tungsten and ferro-silico-tungstenFree

7202.91 Ferro-alloys; ferro-titanium and ferro-silico-titanium

  • 7202.91.00.00 Ferro-titanium and ferro-silico-titaniumFree

7202.92 Ferro-alloys; ferro-vanadium

  • 7202.92.00.00 Ferro-vanadiumFree

7202.93 Ferro-alloys; ferro-niobium

  • 7202.93.00.00 Ferro-niobiumFree

7202.99 Ferro-alloys; n.e.c. in heading no. 7202

  • 7202.99.10.00 Ferro-phosphorusFree
  • 7202.99.30.00 Ferro-silico-magnesiumFree
  • Other
  • 7202.99.80.30 Calcium-silicon - an alloy that contains by weight 16% or more of calcium, 45 % or more of silicon, not less than 4 % but less than 14 % of iron and not more than 10 % of any other element; whether or not presented in bulk, packaged in bags or in steel drums, enclosed in steel sheets (or cored wire), or otherwise presentedFree
  • 7202.99.80.90 OtherFree

7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or the like; iron having a minimum purity of 99.94%, in lumps, pellets or similar forms

7203.10 Ferrous products; obtained by direct reduction of iron ore, in lumps, pellets or similar forms

  • 7203.10.00.00 Ferrous products obtained by direct reduction of iron oreFree

7203.90 Ferrous products; spongy ferrous products and iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms

  • 7203.90.00.00 OtherFree

7204 Ferrous waste and scrap; remelting scrap ingots of iron or steel

7204.10 Ferrous waste and scrap; of cast iron

  • 7204.10.00.00 Waste and scrap of cast ironFree

7204.21 Ferrous waste and scrap; of stainless steel

  • Containing by weight 8 % or more of nickel
  • 7204.21.10.10 ScrapFree
  • 7204.21.10.90 OtherFree
  • Other
  • 7204.21.90.10 ScrapFree
  • 7204.21.90.90 OtherFree

7204.29 Ferrous waste and scrap; of alloy steel (excluding stainless)

  • 7204.29.00.10 ScrapFree
  • 7204.29.00.90 OtherFree

7204.30 Ferrous waste and scrap; of tinned iron or steel

  • 7204.30.00.10 ScrapFree
  • 7204.30.00.90 OtherFree

7204.41 Ferrous waste and scrap; turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles

  • Turnings, shavings, chips, milling waste, sawdust and filings
  • 7204.41.10.10 ScrapFree
  • 7204.41.10.90 OtherFree
  • Trimmings and stampings
  • In bundles
  • 7204.41.91.10 ScrapFree
  • 7204.41.91.90 OtherFree
  • Other
  • 7204.41.99.10 ScrapFree
  • 7204.41.99.90 OtherFree

7204.49 Ferrous waste and scrap; n.e.c. in heading no. 7204

  • Fragmentised (shredded)
  • 7204.49.10.10 ScrapFree
  • 7204.49.10.90 OtherFree
  • Other
  • In bundles
  • 7204.49.30.10 ScrapFree
  • 7204.49.30.90 OtherFree
  • Other
  • 7204.49.90.10 ScrapFree
  • 7204.49.90.90 OtherFree

7204.50 Ferrous products; remelting scrap ingots

  • 7204.50.00.00 Remelting scrap ingotsFree

7205 Granules and powders, of pig iron, spiegeleisen, iron or steel

7205.10 Iron or steel, pig iron, spiegeleisen; granules thereof

  • 7205.10.00.00 GranulesFree

7205.21 Alloy steel powders

  • 7205.21.00.00 Of alloy steelFree

7205.29 Iron or steel, pig iron, spiegeleisen; powders (excluding alloy steel)

  • 7205.29.00.00 OtherFree

7206 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading no. 7203)

7206.10 Iron or non-alloy steel; ingots (excluding iron of heading no. 7203)

  • 7206.10.00.00 IngotsFree

7206.90 Iron or non-alloy steel; primary forms (excluding ingots and iron of heading no. 7203)

  • 7206.90.00.00 OtherFree

7207 Iron or non-alloy steel; semi-finished products thereof

7207.11 Iron or non-alloy steel; semi-finished products of iron or non-alloy steel; containing by weight less than 0.25% of carbon, of rectangular (including square) cross-section, width less than twice thickness

  • Rolled or obtained by continuous casting
  • 7207.11.11.00 Of free-cutting steelFree
  • Other
  • 7207.11.14.00 Of a thickness not exceeding 130 mmFree
  • 7207.11.16.00 Of a thickness exceeding 130 mmFree
  • 7207.11.90.00 ForgedFree

7207.12 Iron or non-alloy steel; semi-finished products of iron or non-alloy steel; containing by weight less than 0.25% of carbon, of rectangular (other than square) cross-section

  • 7207.12.10.00 Rolled or obtained by continuous castingFree
  • 7207.12.90.00 ForgedFree

7207.19 Iron or non-alloy steel; semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% of carbon, other than rectangular or square cross-section

  • Of circular or polygonal cross-section
  • 7207.19.12.00 Rolled or obtained by continuous castingFree
  • 7207.19.19.00 ForgedFree
  • Other
  • 7207.19.80.10 Blanks for angles, shapes and sections, rolled or obtained by continuous castingFree
  • 7207.19.80.90 OtherFree

7207.20 Iron or non-alloy steel; semi-finished products of iron or non-alloy steel, containing by weight 0.25% or more of carbon

  • Of rectangular (including square) cross-section, the width measuring less than twice the thickness
  • Rolled or obtained by continuous casting
  • 7207.20.11.00 Of free-cutting steelFree
  • Other, containing by weight
  • 7207.20.15.00 0,25 % or more but less than 0,6 % of carbonFree
  • 7207.20.17.00 0,6 % or more of carbonFree
  • 7207.20.19.00 ForgedFree
  • Other, of rectangular (other than square) cross-section
  • 7207.20.32.00 Rolled or obtained by continuous castingFree
  • 7207.20.39.00 ForgedFree
  • Of circular or polygonal cross-section
  • 7207.20.52.00 Rolled or obtained by continuous castingFree
  • 7207.20.59.00 ForgedFree
  • Other
  • 7207.20.80.10 Blanks for angles, shapes and sections, rolled or obtained by continuous castingFree
  • 7207.20.80.90 OtherFree

7208 Iron or non-alloy steel; flat-rolled products of a width of 600mm or more, hot-rolled, not clad, plated or coated

7208.10 Iron or non-alloy steel; in coils, flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief

  • 7208.10.00.00 In coils, not further worked than hot-rolled, with patterns in relief50%

7208.25 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 4.75mm or more

  • 7208.25.00.00 Of a thickness of 4,75 mm or more50%

7208.26 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 3mm or more but less than 4.75mm

  • 7208.26.00.00 Of a thickness of 3 mm or more but less than 4,75 mm50%

7208.27 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of less than 3mm

  • 7208.27.00.00 Of a thickness of less than 3 mm50%

7208.36 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness exceeding 10mm

  • 7208.36.00.00 Of a thickness exceeding 10 mm50%

7208.37 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 4.75mm or more but not exceeding 10mm

  • 7208.37.00.10 Intended for re-rolling50%
  • 7208.37.00.90 Other50%

7208.38 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 3mm or more but less than 4.75mm

  • 7208.38.00.10 Intended for re-rolling50%
  • 7208.38.00.90 Other50%

7208.39 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of less than 3mm

  • 7208.39.00.10 Intended for re-rolling50%
  • 7208.39.00.90 Other50%

7208.40 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief

  • 7208.40.00.10 Of a thickness of 2 mm or more50%
  • 7208.40.00.90 Of a thickness of less than 2 mm50%

7208.51 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness exceeding 10mm

  • Of a thickness exceeding 15 mm
  • 7208.51.20.10 Of non-alloy steel, excluding tool steel50%
  • 7208.51.20.90 Other50%
  • Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of
  • 2 050 mm or more
  • 7208.51.91.10 Of non-alloy steel, excluding tool steel50%
  • 7208.51.91.90 Other50%
  • Less than 2 050 mm
  • 7208.51.98.10 Of non-alloy steel, excluding tool steel50%
  • 7208.51.98.90 Other50%

7208.52 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 4.75mm or more but not exceeding 10mm

  • 7208.52.10.00 Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm50%
  • Other, of a width of
  • 2 050 mm or more
  • 7208.52.91.10 Of non-alloy steel, excluding tool steelFree
  • 7208.52.91.90 OtherFree
  • 7208.52.99.00 Less than 2 050 mm50%

7208.53 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 3mm or more but less than 4.75mm

  • 7208.53.10.00 Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or more50%
  • 7208.53.90.00 Other50%

7208.54 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of less than 3mm

  • 7208.54.00.00 Of a thickness of less than 3 mm50%

7208.90 Iron or non-alloy steel; flat-rolled, hot-rolled, of a width 600mm or more, n.e.c. in heading no. 7208

  • Perforated
  • 7208.90.20.10 Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more50%
  • 7208.90.20.90 Other50%
  • Other
  • 7208.90.80.10 Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)50%
  • 7208.90.80.20 Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more50%
  • 7208.90.80.90 Other50%

7209 Iron or non-alloy steel; flat-rolled products, width 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated

7209.15 Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more

  • 7209.15.00.10 'electrical'Free
  • 7209.15.00.90 OtherFree

7209.16 Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm

  • 7209.16.10.00 'electrical'Free
  • 7209.16.90.00 OtherFree

7209.17 Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm

  • 7209.17.10.00 'electrical'Free
  • 7209.17.90.00 OtherFree

7209.18 Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm

  • 7209.18.10.00 'electrical'Free
  • Other
  • 7209.18.91.00 Of a thickness of 0,35 mm or more but less than 0,5 mmFree
  • Of a thickness of less than 0,35 mm
  • 7209.18.99.10 Annealed (known as 'black plates')50%
  • 7209.18.99.90 Other50%

7209.25 Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more

  • 7209.25.00.10 'electrical'Free
  • 7209.25.00.90 OtherFree

7209.26 Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm

  • 7209.26.10.00 'electrical'Free
  • 7209.26.90.00 OtherFree

7209.27 Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm

  • 7209.27.10.00 'electrical'Free
  • 7209.27.90.00 OtherFree

7209.28 Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm

  • 7209.28.10.00 'electrical'Free
  • 7209.28.90.00 OtherFree

7209.90 Iron or non-alloy steel; flat-rolled, width 600mm or more, cold-rolled, n.e.c. in heading no. 7209

  • 7209.90.20.00 PerforatedFree
  • Other
  • 7209.90.80.10 Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)Free
  • 7209.90.80.90 OtherFree

7210 Iron or non-alloy steel; flat-rolled products, width 600mm or more, clad, plated or coated

7210.11 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of 0.5mm or more

  • 7210.11.00.10 Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)50%
  • 7210.11.00.90 Other50%

7210.12 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of less than 0.5mm

  • Tinplate
  • 7210.12.20.10 Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)50%
  • 7210.12.20.90 Other50%
  • Other
  • 7210.12.80.10 Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)50%
  • 7210.12.80.90 Other50%

7210.20 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with lead, including terne-plate

  • 7210.20.00.10 Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)50%
  • 7210.20.00.90 Other50%

7210.30 Iron or non-alloy steel; flat-rolled, width 600mm or more, electrolytically plated or coated with zinc

  • 7210.30.00.10 Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)Free
  • 7210.30.00.90 OtherFree

7210.41 Iron or non-alloy steel; flat-rolled, width 600mm or more, corrugated, plated or coated with zinc (not electrolytically)

  • Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
  • 7210.41.00.20 Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7210.41.00.30 Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7210.41.00.80 Other50%
  • 7210.41.00.90 Other50%

7210.49 Iron or non-alloy steel; flat-rolled, width 600mm or more, (not corrugated), plated or coated with zinc (not electrolytically)

  • Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
  • 7210.49.00.20 Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7210.49.00.30 Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7210.49.00.80 Other50%
  • 7210.49.00.90 Other50%

7210.50 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with chromium oxides or with chromium and chromium oxides

  • 7210.50.00.10 Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)50%
  • 7210.50.00.90 Other50%

7210.61 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium zinc-alloys

  • Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
  • 7210.61.00.20 Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7210.61.00.30 Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7210.61.00.80 Other50%
  • 7210.61.00.90 Other50%

7210.69 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium, other than plated or coated with aluminium zinc-alloys

  • Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
  • 7210.69.00.20 Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7210.69.00.30 Plated or coated by hot dip galvanisation with aluminium and/or magnesium, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7210.69.00.80 Other50%
  • 7210.69.00.90 Other50%

7210.70 Iron or non-alloy steel; flat-rolled, width 600mm or more, painted, varnished or coated with plastics

  • Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
  • Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
  • Tinplate
  • 7210.70.10.15 Not painted50%
  • 7210.70.10.19 Other50%
  • 7210.70.10.91 Other50%
  • 7210.70.10.95 Other50%
  • Other
  • Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
  • 7210.70.80.11 Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70 % or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin50%
  • Other
  • Coated or plated with tin
  • 7210.70.80.20 Not painted50%
  • 7210.70.80.23 Other50%
  • 7210.70.80.25 Other50%
  • Other
  • 7210.70.80.91 Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin50%
  • Other
  • Coated or plated with tin
  • 7210.70.80.92 Not painted50%
  • 7210.70.80.93 Other50%
  • 7210.70.80.95 Other50%

7210.90 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with materials n.e.c. in heading no. 7210

  • Clad
  • 7210.90.30.10 Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)50%
  • 7210.90.30.90 Other50%
  • Tinned and printed
  • 7210.90.40.10 Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)50%
  • 7210.90.40.90 Other50%
  • Other
  • Coated or plated with tin, whether or not coated with a plastic material and/or varnished
  • 7210.90.80.20 Not painted50%
  • 7210.90.80.29 Other50%
  • Other
  • 7210.90.80.91 Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)50%
  • 7210.90.80.92 Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7210.90.80.99 Other50%

7211 Iron or non-alloy steel; flat-rolled products, width less than 600mm, not clad, plated or coated

7211.13 Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief

  • 7211.13.00.11 Of a width not exceeding 350 mm and of a thickness of 50 mm or more50%
  • 7211.13.00.19 Other50%

7211.14 Iron or non-alloy steel; flat-rolled, hot-rolled, of a width less than 600mm, 4.75mm thick or more, excluding those of item no. 7211.13

  • 7211.14.00.10 Of a width exceeding 500 mm50%
  • Of a width not exceeding 500 mm
  • 7211.14.00.91 Of a width not exceeding 350 mm and of a thickness of 50 mm or more50%
  • 7211.14.00.95 Other50%

7211.19 Iron or non-alloy steel; flat-rolled, hot-rolled, of a width less than 600mm, less than 4.75mm thick, excluding those of item no. 7211.13

  • 7211.19.00.10 Of a width exceeding 500 mm50%
  • Of a width not exceeding 500 mm
  • 7211.19.00.91 Of a width not exceeding 350 mm and of a thickness of 50 mm or more50%
  • 7211.19.00.95 Other50%

7211.23 Iron or non-alloy steel; flat-rolled, cold-rolled, of a width less than 600mm, containing by weight less than 0.25% of carbon

  • 'electrical'
  • 7211.23.20.10 Of a width exceeding 500 mmFree
  • 7211.23.20.90 Of a width not exceeding 500 mmFree
  • Other
  • Of a thickness of 0,35 mm or more
  • 7211.23.30.10 Of a width exceeding 500 mmFree
  • Of a width not exceeding 500 mm
  • 7211.23.30.91 In coils intended for the manufacture of tinplateFree
  • 7211.23.30.99 OtherFree
  • Of a thickness of less than 0,35 mm
  • Of a width exceeding 500 mm
  • 7211.23.80.11 In coils, annealed (known as 'black plates')Free
  • 7211.23.80.19 OtherFree
  • Of a width not exceeding 500 mm
  • In coils intended for the manufacture of tinplate
  • 7211.23.80.93 Annealed (known as 'black plates')Free
  • 7211.23.80.95 OtherFree
  • Other
  • 7211.23.80.97 In coils, annealed (known as 'black plates')Free
  • 7211.23.80.99 OtherFree

7211.29 Iron or non-alloy steel; flat-rolled, cold-rolled, of a width less than 600mm, containing by weight 0.25% or more of carbon

  • Of a width exceeding 500 mm
  • 7211.29.00.11 'electrical'Free
  • 7211.29.00.19 OtherFree
  • Of a width not exceeding 500 mm
  • 7211.29.00.91 'electrical'Free
  • 7211.29.00.99 OtherFree

7211.90 Iron or non-alloy steel; flat-rolled, n.e.c. in heading no. 7211, width less than 600mm

  • 7211.90.20.00 PerforatedFree
  • Other
  • Of a width exceeding 500 mm
  • 7211.90.80.10 Not further worked than surface-treatedFree
  • 7211.90.80.20 OtherFree
  • 7211.90.80.90 Of a width not exceeding 500 mmFree

7212 Iron or non-alloy steel; flat-rolled products, width less than 600mm, clad, plated or coated

7212.10 Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated with tin

  • 7212.10.10.00 Tinplate, not further worked than surface-treated50%
  • Other
  • Of a width exceeding 500 mm
  • 7212.10.90.11 Not further worked than surface-treated50%
  • 7212.10.90.19 Other50%
  • 7212.10.90.90 Of a width not exceeding 500 mm50%

7212.20 Iron or non-alloy steel; flat-rolled, of a width less than 600mm, electrolytically plated or coated with zinc

  • Of a width exceeding 500 mm
  • 7212.20.00.11 Not further worked than surface-treated50%
  • 7212.20.00.19 Other50%
  • 7212.20.00.90 Of a width not exceeding 500 mm50%

7212.30 Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated with zinc (not electrolytically)

  • Not further worked than surface-treated
  • 7212.30.00.20 Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7212.30.00.30 Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7212.30.00.80 Other50%
  • 7212.30.00.90 Other50%

7212.40 Iron or non-alloy steel; flat-rolled, width less than 600mm, painted, varnished or coated with plastics

  • Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
  • Tinplate, not further worked than varnished
  • 7212.40.20.10 Not painted50%
  • 7212.40.20.19 Other50%
  • Other
  • Of a width exceeding 500 mm
  • 7212.40.20.91 Not further worked than surface-treated50%
  • 7212.40.20.93 Other50%
  • 7212.40.20.99 Of a width not exceeding 500 mm50%
  • Other
  • Of a width exceeding 500 mm
  • Not further worked than surface-treated
  • 7212.40.80.01 Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70 % or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin50%
  • Other
  • Coated or plated with tin
  • 7212.40.80.12 Not painted50%
  • 7212.40.80.14 Other50%
  • 7212.40.80.15 Other50%
  • Other
  • 7212.40.80.21 Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin50%
  • Other
  • Coated or plated with tin
  • 7212.40.80.30 Not painted50%
  • 7212.40.80.33 Other50%
  • 7212.40.80.35 Other50%
  • Of a width not exceeding 500 mm
  • Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc)
  • Coated or plated with tin
  • 7212.40.80.80 Not painted50%
  • 7212.40.80.81 Other50%
  • 7212.40.80.82 Other50%
  • Other
  • Coated or plated with tin
  • 7212.40.80.85 Not painted50%
  • 7212.40.80.86 Other50%
  • 7212.40.80.87 Other50%

7212.50 Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated, (excluding tin, zinc or plastic)

  • Plated or coated with chromium oxides or with chromium and chromium oxides
  • Of a width exceeding 500 mm
  • 7212.50.20.11 Not further worked than surface-treated50%
  • 7212.50.20.19 Other50%
  • 7212.50.20.90 Of a width not exceeding 500 mm50%
  • Plated or coated with chromium or nickel
  • Of a width exceeding 500 mm
  • 7212.50.30.11 Not further worked than surface-treated50%
  • 7212.50.30.19 Other50%
  • 7212.50.30.90 Of a width not exceeding 500 mm50%
  • Plated or coated with copper
  • Of a width exceeding 500 mm
  • 7212.50.40.11 Not further worked than surface-treated50%
  • 7212.50.40.19 Other50%
  • 7212.50.40.90 Of a width not exceeding 500 mm50%
  • Plated or coated with aluminium
  • Plated or coated with aluminium-zinc alloys
  • 7212.50.61.20 Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7212.50.61.30 Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7212.50.61.80 Other50%
  • Other
  • 7212.50.69.20 Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7212.50.69.30 Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7212.50.69.80 Other50%
  • Other
  • Of a width exceeding 500 mm
  • 7212.50.90.11 Silvered, gilded, platinum-plated or enamelled50%
  • Other
  • 7212.50.90.13 Not further worked than surface-treated50%
  • 7212.50.90.14 Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7212.50.90.19 Other50%
  • Of a width not exceeding 500 mm
  • 7212.50.90.92 Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7212.50.90.95 Other50%

7212.60 Iron or non-alloy steel; flat-rolled, width less than 600mm, clad

  • Of a width not exceeding 500 mm
  • Not further worked than surface-treated
  • 7212.60.00.12 Hot-rolled, not further worked than clad50%
  • 7212.60.00.19 Other50%
  • 7212.60.00.20 Other50%
  • Other
  • 7212.60.00.50 Not further worked than surface-treated50%
  • 7212.60.00.98 Other50%

7213 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils

7213.10 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, containing indentations, ribs, grooves or other deformations produced during the rolling process

  • 7213.10.00.00 Containing indentations, ribs, grooves or other deformations produced during the rolling process50%

7213.20 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, of free-cutting steel

  • 7213.20.00.00 Other, of free-cutting steel50%

7213.91 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7213, of circular cross-section measuring less than 14mm in diameter

  • 7213.91.10.00 Of a type used for concrete reinforcement50%
  • 7213.91.20.00 Of a type used for tyre cord50%
  • Other
  • 7213.91.41.00 Containing by weight 0,06 % or less of carbon50%
  • 7213.91.49.00 Containing by weight more than 0,06 % but less than 0,25 % of carbon50%
  • 7213.91.70.00 Containing by weight 0,25 % or more but not more than 0,75 % of carbon50%
  • 7213.91.90.00 Containing by weight more than 0,75 % of carbon50%

7213.99 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7213, of circular cross-section measuring 14mm or more in diameter

  • 7213.99.10.00 Containing by weight less than 0,25 % of carbon50%
  • 7213.99.90.00 Containing by weight 0,25 % or more of carbon50%

7214 Iron or non-alloy steel; bars and rods, not further worked than forged, hot-rolled, hot drawn or hot-extruded, but including those twisted after rolling

7214.10 Iron or non-alloy steel; bars and rods, forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling

  • 7214.10.00.10 Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round barsFree
  • 7214.10.00.90 OtherFree

7214.20 Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

  • 7214.20.00.10 High fatigue performance concrete reinforcing bars and rods50%
  • Other
  • 7214.20.00.20 Concrete reinforcement bars and rods excluding long products, such as round bars50%
  • 7214.20.00.80 Other50%

7214.30 Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, including those twisted after rolling, of free-cutting steel

  • 7214.30.00.10 Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars50%
  • 7214.30.00.90 Other50%

7214.91 Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, n.e.c. in heading no. 7214, of rectangular (other than square) cross-section

  • Containing by weight less than 0,25 % of carbon
  • 7214.91.10.10 Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars50%
  • 7214.91.10.90 Other50%
  • Containing by weight 0,25 % or more of carbon
  • 7214.91.90.10 Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars50%
  • 7214.91.90.90 Other50%

7214.99 Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, n.e.c. in heading no. 7214, other than of rectangular cross-section

  • Containing by weight less than 0,25 % of carbon
  • Of a type used for concrete reinforcement
  • 7214.99.10.10 Bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance bars and rods, and excluding other long products, such as round bars50%
  • 7214.99.10.90 Other50%
  • Other, of circular cross-section measuring in diameter
  • 7214.99.31.00 80 mm or more50%
  • 7214.99.39.00 Less than 80 mm50%
  • 7214.99.50.00 Other50%
  • Containing by weight 0,25 % or more of carbon
  • Of a circular cross-section measuring in diameter
  • 7214.99.71.00 80 mm or more50%
  • 7214.99.79.00 Less than 80 mm50%
  • Other
  • 7214.99.95.10 Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars50%
  • 7214.99.95.90 Other50%

7215 Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72

7215.10 Iron or non-alloy steel; bars and rods, of free-cutting steel, cold-formed or cold-finished, n.e.c. in chapter 72

  • 7215.10.00.00 Of free-cutting steel, not further worked than cold-formed or cold-finished50%

7215.50 Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72, cold-formed or cold-finished, (not free-cutting)

  • Containing by weight less than 0,25 % of carbon
  • 7215.50.11.00 Of rectangular (other than square) cross-section50%
  • 7215.50.19.00 Other50%
  • 7215.50.80.00 Containing by weight 0,25 % or more of carbon50%

7215.90 Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72, n.e.c. in heading no. 7215

  • 7215.90.00.10 Hot-rolled, hot-drawn or extruded, not further worked than clad50%
  • 7215.90.00.90 Other50%

7216 Iron or non-alloy steel, angles, shapes and sections

7216.10 Iron or non-alloy steel; U, I or H sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm

  • 7216.10.00.00 U, i or h sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm50%

7216.21 Iron or non-alloy steel; L sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm

  • 7216.21.00.00 L sections50%

7216.22 Iron or non-alloy steel; T sections, hot-rolled, hot-drawn or extruded, of a height less than 80mm

  • 7216.22.00.00 T sections50%

7216.31 Iron or non-alloy steel; U sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more

  • 7216.31.10.00 Of a height of 80 mm or more but not exceeding 220 mm50%
  • 7216.31.90.00 Of a height exceeding 220 mm50%

7216.32 Iron or non-alloy steel; I sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more

  • Of a height of 80 mm or more but not exceeding 220 mm
  • 7216.32.11.00 With parallel flange faces50%
  • 7216.32.19.00 Other50%
  • Of a height exceeding 220 mm
  • 7216.32.91.00 With parallel flange faces50%
  • 7216.32.99.00 Other50%

7216.33 Iron or non-alloy steel; H sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more

  • 7216.33.10.00 Of a height of 80 mm or more but not exceeding 180 mm50%
  • 7216.33.90.00 Of a height exceeding 180 mm50%

7216.40 Iron or non-alloy steel; L or T sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more

  • 7216.40.10.00 L sections50%
  • 7216.40.90.00 T sections50%

7216.50 Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216, hot-rolled, hot-drawn or extruded

  • 7216.50.10.00 With a cross-section which is capable of being enclosed in a square the side of which is 80 mm50%
  • Other
  • Bulb flats
  • 7216.50.91.10 In the range up to 204 mm width50%
  • 7216.50.91.90 Other50%
  • 7216.50.99.00 Other50%

7216.61 Iron or non-alloy steel; angles, shapes and sections, cold-formed or cold-finished, obtained from flat-rolled products

  • 7216.61.10.00 C, l, u, z, omega or open-ended sectionsFree
  • 7216.61.90.00 OtherFree

7216.69 Iron or non-alloy steel; angles, shapes and sections, cold-formed or cold-finished, (not obtained from flat-rolled products)

  • 7216.69.00.00 OtherFree

7216.91 Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216, cold-formed or cold-finished, from flat-rolled products

  • 7216.91.10.00 Profiled (ribbed) sheetsFree
  • 7216.91.80.00 OtherFree

7216.99 Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216

  • 7216.99.00.10 Hot-rolled, hot-drawn or extruded, not further worked than cladFree
  • 7216.99.00.90 OtherFree

7217 Wire of iron or non-alloy steel

7217.10 Iron or non-alloy steel; wire, (not plated or coated), whether or not polished

  • Containing by weight less than 0,25 % of carbon
  • 7217.10.10.00 With a maximum cross-sectional dimension of less than 0,8 mm50%
  • With a maximum cross-sectional dimension of 0,8 mm or more
  • 7217.10.31.00 Containing indentations, ribs, grooves or other deformations produced during the rolling process50%
  • 7217.10.39.00 Other50%
  • 7217.10.50.00 Containing by weight 0,25 % or more but less than 0,6 % of carbon50%
  • Containing by weight 0,6 % or more of carbon
  • 7217.10.90.10 Of non-alloy steel, with a maximum cross-sectional dimension exceeding 3 mm50%
  • 7217.10.90.90 Other50%

7217.20 Iron or non-alloy steel; wire, plated or coated with zinc

  • Containing by weight less than 0,25 % of carbon
  • 7217.20.10.00 With a maximum cross-sectional dimension of less than 0,8 mmFree
  • 7217.20.30.00 With a maximum cross-sectional dimension of 0,8 mm or moreFree
  • 7217.20.50.00 Containing by weight 0,25 % or more but less than 0,6 % of carbonFree
  • Containing by weight 0,6 % or more of carbon
  • 7217.20.90.10 Of non-alloy steel, with a maximum cross-sectional dimension exceeding 3 mmFree
  • 7217.20.90.90 OtherFree

7217.30 Iron or non-alloy steel; wire, plated or coated with base metals (other than zinc)

  • Containing by weight less than 0,25 % of carbon
  • 7217.30.41.00 Copper-coated50%
  • 7217.30.49.00 OtherFree
  • 7217.30.50.00 Containing by weight 0,25 % or more but less than 0,6 % of carbon50%
  • 7217.30.90.00 Containing by weight 0,6 % or more of carbonFree

7217.90 Iron or non-alloy steel; wire, n.e.c. in heading no. 7217

  • 7217.90.20.00 Containing by weight less than 0,25 % of carbonFree
  • 7217.90.50.00 Containing by weight 0,25 % or more but less than 0,6 % of carbonFree
  • 7217.90.90.00 Containing by weight 0,6 % or more of carbonFree

7218 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel

7218.10 Steel, stainless; ingots and other primary forms

  • 7218.10.00.00 Ingots and other primary formsFree

7218.91 Steel, stainless; semi-finished products, of rectangular (other than square) cross-section

  • 7218.91.10.00 Containing by weight 2,5 % or more of nickelFree
  • 7218.91.80.00 Containing by weight less than 2,5 % of nickelFree

7218.99 Steel, stainless; semi-finished products, other than of rectangular cross-section

  • Of square cross-section
  • 7218.99.11.00 Rolled or obtained by continous castingFree
  • 7218.99.19.00 ForgedFree
  • Other
  • 7218.99.20.00 Rolled or obtained by continuous castingFree
  • 7218.99.80.00 ForgedFree

7219 Stainless steel; flat-rolled products of width of 600mm or more

7219.11 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness exceeding 10mm

  • 7219.11.00.10 Consigned from türkiyeFree
  • 7219.11.00.90 OtherFree

7219.12 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 4.75mm or more but not exceeding 10mm

  • Containing by weight 2,5 % or more of nickel
  • 7219.12.10.10 Consigned from türkiyeFree
  • 7219.12.10.90 OtherFree
  • Containing by weight less than 2,5 % of nickel
  • 7219.12.90.10 Consigned from türkiyeFree
  • 7219.12.90.90 OtherFree

7219.13 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 3mm or more but less than 4.75mm

  • Containing by weight 2,5 % or more of nickel
  • 7219.13.10.10 Consigned from türkiyeFree
  • 7219.13.10.90 OtherFree
  • Containing by weight less than 2,5 % of nickel
  • 7219.13.90.10 Consigned from türkiyeFree
  • 7219.13.90.90 OtherFree

7219.14 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of less than 3mm

  • Containing by weight 2,5 % or more of nickel
  • 7219.14.10.10 Consigned from türkiyeFree
  • 7219.14.10.90 OtherFree
  • Containing by weight less than 2,5 % of nickel
  • 7219.14.90.10 Consigned from türkiyeFree
  • 7219.14.90.90 OtherFree

7219.21 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness exceeding 10mm

  • 7219.21.10.00 Containing by weight 2,5 % or more of nickelFree
  • 7219.21.90.00 Containing by weight less than 2,5 % of nickelFree

7219.22 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 4.75mm or more but not exceeding 10mm

  • Containing by weight 2,5 % or more of nickel
  • 7219.22.10.10 Consigned from türkiyeFree
  • 7219.22.10.90 OtherFree
  • Containing by weight less than 2,5 % of nickel
  • 7219.22.90.10 Consigned from türkiyeFree
  • 7219.22.90.90 OtherFree

7219.23 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 3mm or more but less than 4.75mm

  • 7219.23.00.10 Consigned from türkiyeFree
  • 7219.23.00.90 OtherFree

7219.24 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of less than 3mm

  • 7219.24.00.10 Consigned from türkiyeFree
  • 7219.24.00.90 OtherFree

7219.31 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled or cold-reduced, of a thickness of 4.75mm or more

  • 7219.31.00.10 Consigned from taiwan or vietnamFree
  • 7219.31.00.20 Consigned from türkiyeFree
  • 7219.31.00.90 OtherFree

7219.32 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more but less than 4.75mm

  • Containing by weight 2,5 % or more of nickel
  • 7219.32.10.10 Consigned from taiwan or vietnamFree
  • 7219.32.10.20 Consigned from türkiyeFree
  • 7219.32.10.90 OtherFree
  • Containing by weight less than 2,5 % of nickel
  • 7219.32.90.10 Consigned from taiwan or vietnamFree
  • 7219.32.90.20 Consigned from türkiyeFree
  • 7219.32.90.90 OtherFree

7219.33 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm

  • Containing by weight 2,5 % or more of nickel
  • 7219.33.10.10 Consigned from taiwan or vietnamFree
  • 7219.33.10.20 Consigned from türkiyeFree
  • 7219.33.10.90 OtherFree
  • Containing by weight less than 2,5 % of nickel
  • 7219.33.90.10 Consigned from taiwan or vietnamFree
  • 7219.33.90.20 Consigned from türkiyeFree
  • 7219.33.90.90 OtherFree

7219.34 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm

  • Containing by weight 2,5 % or more of nickel
  • 7219.34.10.10 Consigned from taiwan or vietnamFree
  • 7219.34.10.20 Consigned from türkiyeFree
  • 7219.34.10.90 OtherFree
  • Containing by weight less than 2,5 % of nickel
  • 7219.34.90.10 Consigned from taiwan or vietnamFree
  • 7219.34.90.20 Consigned from türkiyeFree
  • 7219.34.90.90 OtherFree

7219.35 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm

  • Containing by weight 2,5 % or more of nickel
  • 7219.35.10.10 Consigned from taiwan or vietnamFree
  • 7219.35.10.20 Consigned from türkiyeFree
  • 7219.35.10.90 OtherFree
  • Containing by weight less than 2,5 % of nickel
  • 7219.35.90.10 Consigned from taiwan or vietnamFree
  • 7219.35.90.20 Consigned from türkiyeFree
  • 7219.35.90.90 OtherFree

7219.90 Steel, stainless; flat-rolled, width 600mm or more, n.e.c. in heading no. 7219

  • Perforated
  • 7219.90.20.10 Consigned from taiwan or vietnamFree
  • 7219.90.20.20 Consigned from türkiyeFree
  • 7219.90.20.90 OtherFree
  • Other
  • 7219.90.80.10 Consigned from taiwan or vietnamFree
  • 7219.90.80.20 Consigned from türkiyeFree
  • 7219.90.80.90 OtherFree

7220 Stainless steel; flat-rolled products of width less than 600mm

7220.11 Steel, stainless; flat-rolled, width less than 600mm, hot-rolled, of a thickness of 4.75mm or more

  • 7220.11.00.10 Consigned from türkiyeFree
  • 7220.11.00.90 OtherFree

7220.12 Steel, stainless; flat-rolled, width less than 600mm, hot-rolled, of a thickness of less than 4.75mm

  • 7220.12.00.10 Consigned from türkiyeFree
  • 7220.12.00.90 OtherFree

7220.20 Steel, stainless; flat-rolled, width less than 600mm, cold-rolled

  • Of a thickness of 3 mm or more, containing by weight
  • 2,5 % or more of nickel
  • 7220.20.21.10 Consigned from taiwan or vietnamFree
  • 7220.20.21.20 Consigned from türkiyeFree
  • 7220.20.21.90 OtherFree
  • Less than 2,5 % of nickel
  • 7220.20.29.10 Consigned from taiwan or vietnamFree
  • 7220.20.29.20 Consigned from türkiyeFree
  • 7220.20.29.90 OtherFree
  • Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight
  • 2,5 % or more of nickel
  • 7220.20.41.10 Consigned from taiwan or vietnamFree
  • 7220.20.41.20 Consigned from türkiyeFree
  • 7220.20.41.90 OtherFree
  • Less than 2,5 % of nickel
  • 7220.20.49.10 Consigned from taiwan or vietnamFree
  • 7220.20.49.20 Consigned from türkiyeFree
  • 7220.20.49.90 OtherFree
  • Of a thickness not exceeding 0,35 mm, containing by weight
  • 2,5 % or more of nickel
  • 7220.20.81.10 Consigned from taiwan or vietnamFree
  • 7220.20.81.20 Consigned from türkiyeFree
  • 7220.20.81.90 OtherFree
  • Less than 2,5 % of nickel
  • 7220.20.89.10 Consigned from taiwan or vietnamFree
  • 7220.20.89.20 Consigned from türkiyeFree
  • 7220.20.89.90 OtherFree

7220.90 Steel, stainless; flat-rolled, width less than 600mm, n.e.c. in heading no 7220

  • Perforated
  • 7220.90.20.10 Consigned from taiwan or vietnamFree
  • 7220.90.20.20 Consigned from türkiyeFree
  • 7220.90.20.90 OtherFree
  • Other
  • 7220.90.80.10 Consigned from taiwan or vietnamFree
  • 7220.90.80.20 Consigned from türkiyeFree
  • 7220.90.80.90 OtherFree

7221 Stainless steel bars and rods, hot-rolled, in irregularly wound coils

7221.00 Steel, stainless; bars and rods, hot-rolled, in irregularly wound coils

  • 7221.00.10.00 Containing by weight 2,5 % or more of nickel50%
  • 7221.00.90.00 Containing by weight less than 2,5 % of nickel50%

7222 Stainless steel bars and rods, angles, shapes and sections

7222.11 Steel, stainless; bars and rods, hot-rolled, hot-drawn or extruded, of circular cross-section

  • Of a diameter of 80 mm or more, containing by weight
  • 7222.11.11.00 2,5 % or more of nickel50%
  • 7222.11.19.00 Less than 2,5 % of nickel50%
  • Of a diameter of less than 80 mm, containing by weight
  • 7222.11.81.00 2,5 % or more of nickel50%
  • 7222.11.89.00 Less than 2,5 % of nickel50%

7222.19 Steel, stainless; bars and rods, hot-rolled, hot-drawn or extruded, other than of circular cross-section

  • 7222.19.10.00 Containing by weight 2,5 % or more of nickelFree
  • 7222.19.90.00 Containing by weight less than 2,5 % of nickelFree

7222.20 Steel, stainless; bars and rods, cold-formed or cold-finished

  • Of circular cross-section
  • Of a diameter of 80 mm or more, containing by weight
  • 7222.20.11.00 2,5 % or more of nickel50%
  • 7222.20.19.00 Less than 2,5 % of nickel50%
  • Of a diameter of 25 mm or more, but less than 80 mm, containing by weight
  • 7222.20.21.00 2,5 % or more of nickel50%
  • 7222.20.29.00 Less than 2,5 % of nickel50%
  • Of a diameter of less than 25 mm, containing by weight
  • 7222.20.31.00 2,5 % or more of nickel50%
  • 7222.20.39.00 Less than 2,5 % of nickel50%
  • Other, containing by weight
  • 7222.20.81.00 2,5 % or more of nickel50%
  • 7222.20.89.00 Less than 2,5 % of nickel50%

7222.30 Steel, stainless; bars and rods, n.e.c. in heading no. 7222

  • Forged, containing by weight
  • 7222.30.51.00 2,5 % or more of nickel50%
  • 7222.30.91.00 Less than 2,5 % of nickelFree
  • Other
  • 7222.30.97.10 Hot-rolled, hot-drawn or extruded, not further worked than clad50%
  • 7222.30.97.90 Other50%

7222.40 Steel, stainless; angles, shapes and sections

  • 7222.40.10.00 Not further worked than hot-rolled, hot-drawn or extrudedFree
  • 7222.40.50.00 Not further worked than cold-formed or cold-finished50%
  • Other
  • 7222.40.90.10 Hot-rolled, hot-drawn or extruded, not further worked than cladFree
  • 7222.40.90.90 OtherFree

7223 Stainless steel wire

7223.00 Steel, stainless; wire

  • Containing by weight 2,5 % or more of nickel
  • 7223.00.11.00 Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromiumFree
  • 7223.00.19.00 OtherFree
  • Containing by weight less than 2,5 % of nickel
  • 7223.00.91.00 Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminiumFree
  • 7223.00.99.00 OtherFree

7224 Alloy steel in ingots or other primary forms, semi-finished products of other alloy steel

7224.10 Steel, alloy; ingots and other primary forms

  • 7224.10.10.00 Of tool steelFree
  • 7224.10.90.00 OtherFree

7224.90 Steel, alloy; semi-finished products

  • Of tool steel
  • 7224.90.02.29 Of rectangular (including square) cross-sectionFree
  • Other
  • 7224.90.02.89 Hot-rolled or obtained by continuous castingFree
  • 7224.90.02.99 OtherFree
  • Other
  • Of rectangular (including square) cross-section
  • Hot-rolled or obtained by continuous casting
  • The width measuring less than twice the thickness
  • 7224.90.03.00 Of high-speed steelFree
  • 7224.90.05.00 Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapterFree
  • 7224.90.07.00 OtherFree
  • 7224.90.14.00 OtherFree
  • 7224.90.18.00 ForgedFree
  • Other
  • Hot-rolled or obtained by continuous casting
  • 7224.90.31.00 Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenumFree
  • 7224.90.38.00 OtherFree
  • 7224.90.90.00 ForgedFree

7225 Alloy steel flat-rolled products, of a width 600mm or more

7225.11 Steel, alloy; flat-rolled, width 600mm or more, of silicon-electrical steel, grain-oriented

  • Of a thickness exceeding 0,16 mm
  • 7225.11.00.11 With a maximum core loss not higher than 0.9 w/kgFree
  • With a maximum core loss not higher than 0.9 w/kg
  • 7225.11.00.12 With a maximum core loss higher than 0.7 w/kg but not higher than 0,9 w/kgFree
  • 7225.11.00.15 With a maximum core loss higher than 0.9 w/kg but not higher than 1,05 w/kgFree
  • 7225.11.00.19 With a maximum core loss higher than 1,05 w/kgFree
  • 7225.11.00.90 OtherFree

7225.19 Steel, alloy; flat-rolled, width 600mm or more, of silicon-electrical steel, (other than grain-oriented)

  • Hot-rolled
  • 7225.19.10.10 Products clad, plated or coated, not in coils, without patterns in relief, of a thickness exceeding 10 mm and products clad, plated or coated, not in coils, without patterns in relief, of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more50%
  • 7225.19.10.90 Other50%
  • 7225.19.90.00 Cold-rolledFree

7225.30 Steel, alloy; flat-rolled, width 600mm or more, hot-rolled, in coils

  • 7225.30.10.00 Of tool steel50%
  • Of high-speed steel
  • 7225.30.30.10 Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)50%
  • 7225.30.30.90 Other50%
  • 7225.30.90.00 Other50%

7225.40 Steel, alloy; flat-rolled, width 600mm or more, hot-rolled, not in coils

  • Of tool steel
  • 7225.40.12.30 Of a thickness of less than 4,75 mm50%
  • 7225.40.12.90 Other50%
  • Of high-speed steel
  • 7225.40.15.10 Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)50%
  • 7225.40.15.90 Other50%
  • Other
  • 7225.40.40.00 Of a thickness exceeding 10 mm50%
  • Of a thickness of 4,75 mm or more but not exceeding 10 mm
  • 7225.40.60.10 Of a width of 2 050 mm or more50%
  • 7225.40.60.90 Other50%
  • 7225.40.90.00 Of a thickness of less than 4,75 mm50%

7225.50 Steel, alloy; flat-rolled, width 600mm or more, cold-rolled

  • Of high-speed steel
  • 7225.50.20.10 Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)Free
  • 7225.50.20.90 OtherFree
  • 7225.50.80.00 OtherFree

7225.91 Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, electrolytically plated or coated with zinc

  • 7225.91.00.10 Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)50%
  • 7225.91.00.90 Other50%

7225.92 Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, plated or coated with zinc (other than electrolytically)

  • Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
  • 7225.92.00.20 Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7225.92.00.30 Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7225.92.00.80 Other50%
  • 7225.92.00.90 Other50%

7225.99 Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, (other than plated or coated with zinc)

  • Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
  • 7225.99.00.11 Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin50%
  • 7225.99.00.22 Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7225.99.00.23 Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7225.99.00.25 Other50%
  • Other, of a thickness exceeding 10 mm or of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more
  • 7225.99.00.41 Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7225.99.00.45 Other50%
  • Other
  • 7225.99.00.91 Painted, varnished or coated with plastics on at least one side, excluding so-called "sandwich panels" of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin50%
  • 7225.99.00.92 Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7225.99.00.93 Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7225.99.00.95 Other50%

7226 Alloy steel flat-rolled products, of a width of less than 600mm

7226.11 Steel, alloy; flat-rolled, width less than 600mm, of silicon-electrical steel, grain-oriented

  • Of a width exceeding 500 mm
  • Of a thickness exceeding 0,16 mm
  • 7226.11.00.12 With a maximum core loss not higher than 0.9 w/kgFree
  • 7226.11.00.13 With a maximum core loss higher than 0.7 w/kg but not higher than 0,9 w/kgFree
  • 7226.11.00.14 With a maximum core loss higher than 0.9 w/kg but not higher than 1,05 w/kgFree
  • 7226.11.00.16 With a maximum core loss higher than 1,05 w/kgFree
  • 7226.11.00.19 OtherFree
  • Of a width not exceeding 500 mm
  • Of a thickness exceeding 0,16 mm
  • 7226.11.00.92 With a maximum core loss not higher than 0.9 w/kgFree
  • 7226.11.00.93 With a maximum core loss higher than 0.7 w/kg but not higher than 0.9 w/kgFree
  • 7226.11.00.94 With a maximum core loss higher than 0.9 w/kg but not higher than 1,05 w/kgFree
  • 7226.11.00.96 With a maximum core loss higher than 1,05 w/kgFree
  • 7226.11.00.99 OtherFree

7226.19 Steel, alloy; flat-rolled, width less than 600mm, of silicon-electrical steel, other than grain-oriented

  • Not further worked than hot-rolled
  • 7226.19.10.10 Products clad, plated or coated50%
  • Other
  • 7226.19.10.91 Of a width not exceeding 350 mm and of a thickness of 50 mm or more50%
  • 7226.19.10.95 Other50%
  • Other
  • 7226.19.80.10 Of a width exceeding 500 mmFree
  • 7226.19.80.90 Of a width not exceeding 500 mmFree

7226.20 Steel, alloy; flat-rolled, width less than 600mm, of high speed steel

  • 7226.20.00.10 Not further worked than hot-rolled; of a width not exceeding 500 mm, hot-rolled, not further worked than clad; of a width exceeding 500 mm, not further worked than cold-rolled (cold-reduced) or not further worked than surface-treated, including claddingFree
  • 7226.20.00.90 OtherFree

7226.91 Steel, alloy; flat-rolled, width less than 600mm, (excluding silicon-electrical or high speed steel), hot-rolled

  • 7226.91.20.00 Of tool steel50%
  • Other
  • Of a thickness of 4,75 mm or more
  • 7226.91.91.11 Of a width not exceeding 350 mm and of a thickness of 50 mm or more50%
  • 7226.91.91.19 Other50%
  • 7226.91.99.00 Of a thickness of less than 4,75 mm50%

7226.92 Steel, alloy; flat-rolled, width less than 600mm, (excluding silicon-electrical or high speed steel), cold-rolled

  • 7226.92.00.10 Of a width exceeding 500 mmFree
  • 7226.92.00.90 Of a width not exceeding 500 mmFree

7226.99 Steel, alloy; flat-rolled, width less than 600mm, n.e.c. in item no. 7226.9

  • 7226.99.10.00 Electrolytically plated or coated with zinc50%
  • Otherwise plated or coated with zinc
  • 7226.99.30.10 Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7226.99.30.30 Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7226.99.30.90 Other50%
  • Other
  • Of a width not exceeding 500 mm, hot-rolled, not further worked than clad; of a width exceeding 500 mm, not further worked than surface-treated, including cladding
  • 7226.99.70.11 Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin50%
  • 7226.99.70.13 Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with or without additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7226.99.70.19 Other50%
  • Other
  • 7226.99.70.91 Painted, varnished or coated with plastics on at least one side, excluding so-called "sandwich panels" of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin50%
  • 7226.99.70.93 Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with or without additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7226.99.70.94 Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50%
  • 7226.99.70.96 Other50%

7227 Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils

7227.10 Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, of high speed steel

  • 7227.10.00.00 Of high-speed steelFree

7227.20 Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, of silico-manganese steel

  • 7227.20.00.00 Of silico-manganese steelFree

7227.90 Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7227

  • 7227.90.10.00 Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter50%
  • 7227.90.50.00 Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum50%
  • 7227.90.95.00 Other50%

7228 Alloy steel bars, rods, shapes and sections; hollow drill bars and rods, of alloy or non-alloy steel

7228.10 Steel, alloy; bars and rods, of high speed steel

  • 7228.10.20.00 Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than cladFree
  • 7228.10.50.00 ForgedFree
  • 7228.10.90.00 Other50%

7228.20 Steel, alloy; bars and rods, of silico-manganese steel

  • Of rectangular (other than square) cross-section, hot-rolled on four faces
  • 7228.20.10.10 Not further worked than hot-rolled, hot-drawn or extrudedFree
  • Other
  • 7228.20.10.91 Hot-rolled, hot-drawn or extruded, not further worked than cladFree
  • 7228.20.10.99 OtherFree
  • Other
  • 7228.20.91.00 Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than cladFree
  • 7228.20.99.00 OtherFree

7228.30 Steel, alloy; bars and rods, hot-rolled, hot-drawn or extruded

  • 7228.30.20.00 Of tool steelFree
  • Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
  • 7228.30.41.00 Of circular cross-section of a diameter of 80 mm or more50%
  • 7228.30.49.00 OtherFree
  • Other
  • Of circular cross-section, of a diameter of
  • 7228.30.61.00 80 mm or more50%
  • Less than 80 mm
  • 7228.30.69.11 Reinforcing bars and rods, containing indentations, ribs, grooves or other deformations50%
  • 7228.30.69.99 Other50%
  • 7228.30.70.00 Of rectangular (other than square) cross-section, hot-rolled on four faces50%
  • 7228.30.89.00 Other50%

7228.40 Steel, alloy; bars and rods, forged

  • 7228.40.10.00 Of tool steelFree
  • 7228.40.90.00 OtherFree

7228.50 Steel, alloy; bars and rods, cold-formed or cold-finished

  • 7228.50.20.00 Of tool steel50%
  • 7228.50.40.00 Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum50%
  • Other
  • Of circular cross-section, of a diameter of
  • 7228.50.61.00 80 mm or moreFree
  • 7228.50.69.00 Less than 80 mm50%
  • 7228.50.80.00 Other50%

7228.60 Steel, alloy; bars and rods n.e.c. in heading no. 7228

  • Of tool steel
  • 7228.60.20.10 Hot-rolled, hot-drawn or extruded, not further worked than cladFree
  • 7228.60.20.90 OtherFree
  • Other
  • 7228.60.80.10 Hot-rolled, hot-drawn or extruded, not further worked than cladFree
  • 7228.60.80.90 OtherFree

7228.70 Steel, alloy; angles, shapes and sections

  • 7228.70.10.00 Not further worked than hot-rolled, hot-drawn or extruded50%
  • Other
  • 7228.70.90.10 Hot-rolled, hot-drawn or extruded, not further worked than cladFree
  • 7228.70.90.90 OtherFree

7228.80 Steel, alloy or non-alloy; hollow drill bars and rods

  • 7228.80.00.00 Hollow drill bars and rodsFree

7229 Wire of other alloy steel

7229.20 Steel, alloy; wire, of silico-manganese steel

  • 7229.20.00.10 With a cross section with a diameter of 0,6mm to 4mm, containing by weight not more than 0,2% of carbon, 0,6% or more but not more than 1,4% of silicon, and 0,9% or more but not more than 1,9% of manganese, but no other element in a proportion that would give the steel the characteristics of another alloy steel, whether coated with copper or bronze or wax/oil based lubricant or notFree
  • 7229.20.00.90 OtherFree

7229.90 Steel, alloy; wire, of materials other than silico-manganese steel

  • 7229.90.20.00 Of high-speed steelFree
  • 7229.90.50.00 Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenumFree
  • 7229.90.90.00 OtherFree

MFN rates from the UK Global Tariff as published, without preferences, quotas, trade remedies or additional measures. Inferred works those out for each product and origin. Whether a product from this chapter qualifies for a lower rate depends on each agreement's product-specific rule for it, under the agreements we cover.