Book a demo

72 Iron and steel

Harmonized Tariff Schedule · MFN rates

Chapter 71Chapter 73

7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms

7201.10 Iron; non-alloy pig iron containing by weight 0.5% or less of phosphorus, in pigs, blocks or other primary forms

  • 7201.10.00.00 Nonalloy pig iron containing by weight 0.5 percent or less of phosphorusFree

7201.20 Iron; non-alloy pig iron containing by weight more than 0.5% of phosphorus, in pigs, blocks or other primary forms

  • 7201.20.00.00 Nonalloy pig iron containing by weight more than 0.5 percent of phosphorusFree

7201.50 Iron; alloy pig iron; spiegeleisen, in pigs, blocks or other primary forms

  • 7201.50.30.00 Alloy pig ironFree
  • 7201.50.60.00 SpiegeleisenFree

7202 Ferro-alloys

7202.11 Ferro-alloys; ferro-manganese, containing by weight more than 2% of carbon

  • 7202.11.10.00 Containing by weight more than 2 percent but not more than 4 percent of carbon1.4%
  • 7202.11.50.00 Containing by weight more than 4 percent of carbon1.5%

7202.19 Ferro-alloys; ferro-manganese, containing by weight 2% or less of carbon

  • 7202.19.10.00 Containing by weight not more than 1 percent of carbon2.3%
  • 7202.19.50.00 Containing by weight more than 1 percent but not more than 2 percent of carbon1.4%

7202.21 Ferro-alloys; ferro-silicon, containing by weight more than 55% of silicon

  • Containing by weight more than 55 percent but not more than 80 percent of silicon
  • 7202.21.10.00 Containing by weight more than 3 percent of calcium1.1%
  • 7202.21.50.00 Other1.5%
  • 7202.21.75.00 Containing by weight more than 80 percent but not more than 90 percent of silicon1.9%
  • 7202.21.90.00 Containing by weight more than 90 percent of silicon5.8%

7202.29 Ferro-alloys; ferro-silicon, containing by weight 55% or less of silicon

  • 7202.29.00.10 Containing by weight over 2 percent of magnesiumFree
  • 7202.29.00.50 OtherFree

7202.30 Ferro-alloys; ferro-silico-manganese

  • 7202.30.00.60 Containing by weight not more than 0.10 percent of carbon3.9%
  • 7202.30.00.90 Other3.9%

7202.41 Ferro-alloys; ferro-chromium, containing by weight more than 4% of carbon

  • 7202.41.00.00 Containing by weight more than 4 percent of carbon1.9%

7202.49 Ferro-alloys; ferro-chromium, containing by weight 4% or less of carbon

  • 7202.49.10.00 Containing by weight more than 3 percent of carbon1.9%
  • Other
  • 7202.49.50.10 Containing by weight more than 0.5 percent of carbon3.1%
  • 7202.49.50.90 Other3.1%

7202.50 Ferro-alloys; ferro-silico-chromium

  • 7202.50.00.00 Ferrosilicon chromium10%

7202.60 Ferro-alloys; ferro-nickel

  • 7202.60.00.00 FerronickelFree

7202.70 Ferro-alloys; ferro-molybdenum

  • 7202.70.00.00 Ferromolybdenum4.5%

7202.80 Ferro-alloys; ferro-tungsten and ferro-silico-tungsten

  • 7202.80.00.00 Ferrotungsten and ferrosilicon tungsten5.6%

7202.91 Ferro-alloys; ferro-titanium and ferro-silico-titanium

  • 7202.91.00.00 Ferrotitanium and ferrosilicon titanium3.7%

7202.92 Ferro-alloys; ferro-vanadium

  • 7202.92.00.00 Ferrovanadium4.2%

7202.93 Ferro-alloys; ferro-niobium

  • 7202.93.40.00 Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon5%
  • 7202.93.80.00 Other5%

7202.99 Ferro-alloys; n.e.c. in heading no. 7202

  • 7202.99.10.00 Ferrozirconium4.2%
  • 7202.99.20.00 Calcium silicon5%
  • Other
  • 7202.99.80.20 Ferrophosphorus5%
  • 7202.99.80.40 Other5%

7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or the like; iron having a minimum purity of 99.94%, in lumps, pellets or similar forms

7203.10 Ferrous products; obtained by direct reduction of iron ore, in lumps, pellets or similar forms

  • 7203.10.00.00 Ferrous products obtained by direct reduction of iron oreFree

7203.90 Ferrous products; spongy ferrous products and iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms

  • 7203.90.00.00 OtherFree

7204 Ferrous waste and scrap; remelting scrap ingots of iron or steel

7204.10 Ferrous waste and scrap; of cast iron

  • 7204.10.00.00 Waste and scrap of cast ironFree

7204.21 Ferrous waste and scrap; of stainless steel

  • 7204.21.00.00 Of stainless steelFree

7204.29 Ferrous waste and scrap; of alloy steel (excluding stainless)

  • 7204.29.00.00 OtherFree

7204.30 Ferrous waste and scrap; of tinned iron or steel

  • 7204.30.00.00 Waste and scrap of tinned iron or steelFree

7204.41 Ferrous waste and scrap; turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles

  • 7204.41.00.20 No. 1 bundlesFree
  • 7204.41.00.40 No. 2 bundlesFree
  • 7204.41.00.60 Borings, shovelings and turningsFree
  • 7204.41.00.80 OtherFree

7204.49 Ferrous waste and scrap; n.e.c. in heading no. 7204

  • 7204.49.00.20 No. 1 heavy meltingFree
  • 7204.49.00.40 No. 2 heavy meltingFree
  • Other
  • 7204.49.00.60 Cut plate and structuralFree
  • 7204.49.00.70 ShreddedFree
  • 7204.49.00.80 OtherFree

7204.50 Ferrous products; remelting scrap ingots

  • 7204.50.00.00 Remelting scrap ingotsFree

7205 Granules and powders, of pig iron, spiegeleisen, iron or steel

7205.10 Iron or steel, pig iron, spiegeleisen; granules thereof

  • 7205.10.00.00 GranulesFree

7205.21 Alloy steel powders

  • 7205.21.00.00 Of alloy steelFree

7205.29 Iron or steel, pig iron, spiegeleisen; powders (excluding alloy steel)

  • 7205.29.00.00 OtherFree

7206 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading no. 7203)

7206.10 Iron or non-alloy steel; ingots (excluding iron of heading no. 7203)

  • 7206.10.00.00 IngotsFree

7206.90 Iron or non-alloy steel; primary forms (excluding ingots and iron of heading no. 7203)

  • 7206.90.00.00 OtherFree

7207 Iron or non-alloy steel; semi-finished products thereof

7207.11 Iron or non-alloy steel; semi-finished products of iron or non-alloy steel; containing by weight less than 0.25% of carbon, of rectangular (including square) cross-section, width less than twice thickness

  • 7207.11.00.00 Of rectangular (including square) cross section, the width measuring less than twice the thicknessFree

7207.12 Iron or non-alloy steel; semi-finished products of iron or non-alloy steel; containing by weight less than 0.25% of carbon, of rectangular (other than square) cross-section

  • 7207.12.00.10 Having a width measuring less than four times the thicknessFree
  • 7207.12.00.50 Having a width measuring at least four times the thicknessFree

7207.19 Iron or non-alloy steel; semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% of carbon, other than rectangular or square cross-section

  • 7207.19.00.30 Of circular cross sectionFree
  • 7207.19.00.90 OtherFree

7207.20 Iron or non-alloy steel; semi-finished products of iron or non-alloy steel, containing by weight 0.25% or more of carbon

  • Of rectangular (including square) cross section
  • 7207.20.00.25 Having a width measuring less than four times the thicknessFree
  • 7207.20.00.45 Having a width measuring at least four times the thicknessFree
  • 7207.20.00.75 Of circular cross sectionFree
  • 7207.20.00.90 OtherFree

7208 Iron or non-alloy steel; flat-rolled products of a width of 600mm or more, hot-rolled, not clad, plated or coated

7208.10 Iron or non-alloy steel; in coils, flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief

  • 7208.10.15.00 PickledFree
  • Other
  • 7208.10.30.00 Of a thickness of 4.75 mm or moreFree
  • 7208.10.60.00 Of a thickness of less than 4.75 mmFree

7208.25 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 4.75mm or more

  • 7208.25.30.00 Of high-strength steelFree
  • 7208.25.60.00 OtherFree

7208.26 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 3mm or more but less than 4.75mm

  • 7208.26.00.30 High-strength steelFree
  • 7208.26.00.60 OtherFree

7208.27 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of less than 3mm

  • High-strength steel
  • 7208.27.00.40 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFree
  • 7208.27.00.45 OtherFree
  • 7208.27.00.60 OtherFree

7208.36 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness exceeding 10mm

  • 7208.36.00.30 High-strength steelFree
  • 7208.36.00.60 OtherFree

7208.37 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 4.75mm or more but not exceeding 10mm

  • 7208.37.00.30 High-strength steelFree
  • 7208.37.00.60 OtherFree

7208.38 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 3mm or more but less than 4.75mm

  • 7208.38.00.15 High-strength steelFree
  • Other
  • 7208.38.00.30 With untrimmed edgesFree
  • 7208.38.00.90 OtherFree

7208.39 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of less than 3mm

  • High-strength steel
  • 7208.39.00.20 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFree
  • 7208.39.00.25 OtherFree
  • Other
  • 7208.39.00.30 With untrimmed edgesFree
  • 7208.39.00.90 OtherFree

7208.40 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief

  • Of a thickness of 4.75 mm or more
  • 7208.40.30.30 Of a thickness exceeding 10 mmFree
  • 7208.40.30.60 OtherFree
  • Of a thickness of less than 4.75 mm
  • 7208.40.60.30 Of a thickness less than 3 mmFree
  • 7208.40.60.60 OtherFree

7208.51 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness exceeding 10mm

  • 7208.51.00.30 Universal mill plateFree
  • Other
  • 7208.51.00.45 Of high-strength steelFree
  • 7208.51.00.60 OtherFree

7208.52 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 4.75mm or more but not exceeding 10mm

  • 7208.52.00.00 Of a thickness of 4.75 mm or more but not exceeding 10 mmFree

7208.53 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 3mm or more but less than 4.75mm

  • 7208.53.00.00 Of a thickness of 3 mm or more but less than 4.75 mmFree

7208.54 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of less than 3mm

  • 7208.54.00.00 Of a thickness of less than 3 mmFree

7208.90 Iron or non-alloy steel; flat-rolled, hot-rolled, of a width 600mm or more, n.e.c. in heading no. 7208

  • 7208.90.00.00 OtherFree

7209 Iron or non-alloy steel; flat-rolled products, width 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated

7209.15 Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more

  • 7209.15.00.00 Of a thickness of 3 mm or moreFree

7209.16 Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm

  • Of high-strength steel
  • Annealed
  • 7209.16.00.40 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFree
  • 7209.16.00.45 OtherFree
  • 7209.16.00.60 OtherFree
  • Other
  • 7209.16.00.70 AnnealedFree
  • 7209.16.00.91 OtherFree

7209.17 Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm

  • Of high-strength steel
  • Annealed
  • 7209.17.00.40 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFree
  • 7209.17.00.45 OtherFree
  • 7209.17.00.60 OtherFree
  • Other
  • 7209.17.00.70 AnnealedFree
  • 7209.17.00.91 OtherFree

7209.18 Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm

  • Of high-strength steel
  • 7209.18.15.30 AnnealedFree
  • 7209.18.15.60 OtherFree
  • Other
  • Of a thickness of less than 0.361 mm (blackplate)
  • 7209.18.25.20 AnnealedFree
  • 7209.18.25.85 OtherFree
  • Other
  • 7209.18.60.20 AnnealedFree
  • 7209.18.60.90 OtherFree

7209.25 Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more

  • 7209.25.00.00 Of a thickness of 3 mm or moreFree

7209.26 Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm

  • 7209.26.00.00 Of a thickness exceeding 1 mm but less than 3 mmFree

7209.27 Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm

  • 7209.27.00.00 Of a thickness of 0.5 mm or more but not exceeding 1 mmFree

7209.28 Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm

  • 7209.28.00.00 Of a thickness of less than 0.5 mmFree

7209.90 Iron or non-alloy steel; flat-rolled, width 600mm or more, cold-rolled, n.e.c. in heading no. 7209

  • 7209.90.00.00 OtherFree

7210 Iron or non-alloy steel; flat-rolled products, width 600mm or more, clad, plated or coated

7210.11 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of 0.5mm or more

  • 7210.11.00.00 Of a thickness of 0.5 mm or moreFree

7210.12 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of less than 0.5mm

  • 7210.12.00.00 Of a thickness of less than 0.5 mmFree

7210.20 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with lead, including terne-plate

  • 7210.20.00.00 Plated or coated with lead, including terne-plateFree

7210.30 Iron or non-alloy steel; flat-rolled, width 600mm or more, electrolytically plated or coated with zinc

  • 7210.30.00.30 Of high-strength steelFree
  • 7210.30.00.60 OtherFree

7210.41 Iron or non-alloy steel; flat-rolled, width 600mm or more, corrugated, plated or coated with zinc (not electrolytically)

  • 7210.41.00.00 CorrugatedFree

7210.49 Iron or non-alloy steel; flat-rolled, width 600mm or more, (not corrugated), plated or coated with zinc (not electrolytically)

  • Of high-strength steel
  • 7210.49.00.40 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFree
  • 7210.49.00.45 OtherFree
  • Other
  • 7210.49.00.91 Of a thickness of 0.4 mm or moreFree
  • 7210.49.00.95 OtherFree

7210.50 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with chromium oxides or with chromium and chromium oxides

  • 7210.50.00.20 Of a width less than 1050 mmFree
  • 7210.50.00.90 OtherFree

7210.61 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium zinc-alloys

  • 7210.61.00.00 Plated or coated with aluminum-zinc alloysFree

7210.69 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium, other than plated or coated with aluminium zinc-alloys

  • 7210.69.00.00 OtherFree

7210.70 Iron or non-alloy steel; flat-rolled, width 600mm or more, painted, varnished or coated with plastics

  • 7210.70.30.00 Not coated or plated with metal and not cladFree
  • Other
  • Zinc coated or plated
  • 7210.70.60.30 Electrolytically coated or platedFree
  • 7210.70.60.60 OtherFree
  • 7210.70.60.90 OtherFree

7210.90 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with materials n.e.c. in heading no. 7210

  • 7210.90.10.00 CladFree
  • Other
  • 7210.90.60.00 Electrolytically coated or plated with base metalFree
  • 7210.90.90.00 OtherFree

7211 Iron or non-alloy steel; flat-rolled products, width less than 600mm, not clad, plated or coated

7211.13 Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief

  • 7211.13.00.00 Universal mill plateFree

7211.14 Iron or non-alloy steel; flat-rolled, hot-rolled, of a width less than 600mm, 4.75mm thick or more, excluding those of item no. 7211.13

  • 7211.14.00.30 Of high-strength steelFree
  • Other
  • 7211.14.00.45 Not in coilsFree
  • 7211.14.00.90 OtherFree

7211.19 Iron or non-alloy steel; flat-rolled, hot-rolled, of a width less than 600mm, less than 4.75mm thick, excluding those of item no. 7211.13

  • Of a width of less than 300 mm
  • 7211.19.15.00 Of high-strength steelFree
  • Other
  • 7211.19.20.00 Of a thickness exceeding 1.25 mmFree
  • 7211.19.30.00 OtherFree
  • Other
  • 7211.19.45.00 Of high-strength steelFree
  • Other
  • 7211.19.60.00 PickledFree
  • Other
  • In coils
  • 7211.19.75.30 With untrimmed edgesFree
  • 7211.19.75.60 OtherFree
  • 7211.19.75.90 OtherFree

7211.23 Iron or non-alloy steel; flat-rolled, cold-rolled, of a width less than 600mm, containing by weight less than 0.25% of carbon

  • Of a width of less than 300 mm
  • Of a thickness exceeding 1.25 mm
  • 7211.23.15.00 Of high-strength steelFree
  • 7211.23.20.00 OtherFree
  • 7211.23.30.00 Of a thickness exceeding 0.25 mm but not exceeding 1.25 mmFree
  • 7211.23.45.00 Of a thickness not exceeding 0.25 mmFree
  • Other
  • 7211.23.60.30 Of a thickness exceeding 1.25 mmFree
  • 7211.23.60.60 Of a thickness exceeding 0.25 mm but not exceeding 1.25 mmFree
  • 7211.23.60.90 Of a thickness not exceeding 0.25 mmFree

7211.29 Iron or non-alloy steel; flat-rolled, cold-rolled, of a width less than 600mm, containing by weight 0.25% or more of carbon

  • Of a width of less than 300 mm
  • Of a thickness exceeding 0.25 mm
  • 7211.29.20.30 Of a width less than 51 mm, in coilsFree
  • 7211.29.20.90 OtherFree
  • 7211.29.45.00 OtherFree
  • Other
  • 7211.29.60.30 Of a thickness exceeding 1.25 mmFree
  • 7211.29.60.80 OtherFree

7211.90 Iron or non-alloy steel; flat-rolled, n.e.c. in heading no. 7211, width less than 600mm

  • 7211.90.00.00 OtherFree

7212 Iron or non-alloy steel; flat-rolled products, width less than 600mm, clad, plated or coated

7212.10 Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated with tin

  • 7212.10.00.00 Plated or coated with tinFree

7212.20 Iron or non-alloy steel; flat-rolled, of a width less than 600mm, electrolytically plated or coated with zinc

  • 7212.20.00.00 Electrolytically plated or coated with zincFree

7212.30 Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated with zinc (not electrolytically)

  • Of a width of less than 300 mm
  • Of a thickness exceeding 0.25 mm or more
  • 7212.30.10.30 Of a width less than 51 mm, in coilsFree
  • 7212.30.10.90 OtherFree
  • 7212.30.30.00 OtherFree
  • 7212.30.50.00 OtherFree

7212.40 Iron or non-alloy steel; flat-rolled, width less than 600mm, painted, varnished or coated with plastics

  • 7212.40.10.00 Of a width of less than 300 mmFree
  • 7212.40.50.00 OtherFree

7212.50 Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated, (excluding tin, zinc or plastic)

  • 7212.50.00.00 Otherwise plated or coatedFree

7212.60 Iron or non-alloy steel; flat-rolled, width less than 600mm, clad

  • 7212.60.00.00 CladFree

7213 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils

7213.10 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, containing indentations, ribs, grooves or other deformations produced during the rolling process

  • 7213.10.00.00 Concrete reinforcing bars and rodsFree

7213.20 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, of free-cutting steel

  • 7213.20.00.10 Containing by weight 0.1 percent or more of leadFree
  • 7213.20.00.80 OtherFree

7213.91 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7213, of circular cross-section measuring less than 14mm in diameter

  • Not tempered, not treated and not partly manufactured
  • 7213.91.30.11 Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapterFree
  • 7213.91.30.15 Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapterFree
  • 7213.91.30.20 Of welding quality wire rods of a kind described in statistical note 7 to this chapterFree
  • 7213.91.30.93 OtherFree
  • Other
  • 7213.91.45.00 Containing by weight 0.6 percent or more of carbonFree
  • 7213.91.60.00 OtherFree

7213.99 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7213, of circular cross-section measuring 14mm or more in diameter

  • Of circular cross section
  • 7213.99.00.30 With a diameter of 14 mm or more but less than 19 mmFree
  • 7213.99.00.60 With a diameter of 19 mm or moreFree
  • 7213.99.00.90 OtherFree

7214 Iron or non-alloy steel; bars and rods, not further worked than forged, hot-rolled, hot drawn or hot-extruded, but including those twisted after rolling

7214.10 Iron or non-alloy steel; bars and rods, forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling

  • 7214.10.00.00 ForgedFree

7214.20 Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

  • 7214.20.00.00 Concrete reinforcing bars and rodsFree

7214.30 Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, including those twisted after rolling, of free-cutting steel

  • 7214.30.00.10 Containing by weight 0.1 percent or more of leadFree
  • 7214.30.00.80 OtherFree

7214.91 Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, n.e.c. in heading no. 7214, of rectangular (other than square) cross-section

  • Containing by weight less than 0.25 percent of carbon
  • 7214.91.00.16 With a maximum cross section less than 152 mmFree
  • 7214.91.00.20 With a maximum cross section of 152 mm or moreFree
  • 7214.91.00.60 Containing by weight 0.25 percent or more but less than 0.6 percent of carbonFree
  • 7214.91.00.90 Containing by weight 0.6 percent or more of carbonFree

7214.99 Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, n.e.c. in heading no. 7214, other than of rectangular cross-section

  • Rounds
  • Containing by weight less than 0.25 percent of carbon
  • 7214.99.00.16 With a diameter less than 76 mmFree
  • 7214.99.00.21 With a diameter of 76 mm or more but not exceeding 152 mmFree
  • 7214.99.00.26 With a diameter exceeding 152 mmFree
  • Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
  • 7214.99.00.31 With a diameter less than 76 mmFree
  • 7214.99.00.36 With a diameter of 76 mm or more but not exceeding 152 mmFree
  • 7214.99.00.40 With a diameter exceeding 152 mmFree
  • 7214.99.00.45 Containing by weight 0.6 percent or more of carbonFree
  • Other
  • 7214.99.00.60 Containing by weight less than 0.25 percent of carbonFree
  • 7214.99.00.75 Containing by weight 0.25 percent or more but less than 0.6 percent of carbonFree
  • 7214.99.00.90 Containing by weight 0.6 percent or more of carbonFree

7215 Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72

7215.10 Iron or non-alloy steel; bars and rods, of free-cutting steel, cold-formed or cold-finished, n.e.c. in chapter 72

  • 7215.10.00.10 Containing by weight 0.1 percent or more of leadFree
  • 7215.10.00.80 OtherFree

7215.50 Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72, cold-formed or cold-finished, (not free-cutting)

  • Containing by weight less than 0.25 percent of carbon
  • 7215.50.00.16 With a diameter or cross section measuring less than 76 mmFree
  • 7215.50.00.18 With a diameter or cross section measuring 76 mm or more but not exceeding 228 mmFree
  • 7215.50.00.20 With a diameter or cross section exceeding 228 mmFree
  • Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
  • 7215.50.00.61 With a diameter or cross section measuring less than 76 mmFree
  • 7215.50.00.63 With a diameter or cross section measuring 76 mm or more but not exceeding 228 mmFree
  • 7215.50.00.65 With a diameter or cross section exceeding 228 mmFree
  • 7215.50.00.90 Containing by weight 0.6 percent or more of carbonFree

7215.90 Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72, n.e.c. in heading no. 7215

  • Plated or coated with metal
  • 7215.90.10.00 Not cold-formedFree
  • 7215.90.30.00 Cold-formedFree
  • 7215.90.50.00 OtherFree

7216 Iron or non-alloy steel, angles, shapes and sections

7216.10 Iron or non-alloy steel; U, I or H sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm

  • 7216.10.00.10 U sectionsFree
  • 7216.10.00.50 OtherFree

7216.21 Iron or non-alloy steel; L sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm

  • 7216.21.00.00 L sectionsFree

7216.22 Iron or non-alloy steel; T sections, hot-rolled, hot-drawn or extruded, of a height less than 80mm

  • 7216.22.00.00 T sectionsFree

7216.31 Iron or non-alloy steel; U sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more

  • 7216.31.00.00 U sectionsFree

7216.32 Iron or non-alloy steel; I sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more

  • 7216.32.00.00 I sections (standard beams)Free

7216.33 Iron or non-alloy steel; H sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more

  • 7216.33.00.30 Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mmFree
  • 7216.33.00.60 Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mmFree
  • 7216.33.00.90 OtherFree

7216.40 Iron or non-alloy steel; L or T sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more

  • 7216.40.00.10 L sectionsFree
  • 7216.40.00.50 OtherFree

7216.50 Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216, hot-rolled, hot-drawn or extruded

  • 7216.50.00.00 Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extrudedFree

7216.61 Iron or non-alloy steel; angles, shapes and sections, cold-formed or cold-finished, obtained from flat-rolled products

  • 7216.61.00.00 Obtained from flat-rolled productsFree

7216.69 Iron or non-alloy steel; angles, shapes and sections, cold-formed or cold-finished, (not obtained from flat-rolled products)

  • 7216.69.00.00 OtherFree

7216.91 Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216, cold-formed or cold-finished, from flat-rolled products

  • 7216.91.00.10 Drilled, notched, punched or camberedFree
  • 7216.91.00.90 OtherFree

7216.99 Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216

  • 7216.99.00.10 Drilled, notched, punched or camberedFree
  • 7216.99.00.90 OtherFree

7217 Wire of iron or non-alloy steel

7217.10 Iron or non-alloy steel; wire, (not plated or coated), whether or not polished

  • Containing by weight less than 0.25 percent of carbon
  • Flat wire
  • 7217.10.10.00 Of a thickness not exceeding 0.25 mmFree
  • 7217.10.20.00 Of a thickness exceeding 0.25 mm but not exceeding 1.25 mmFree
  • 7217.10.30.00 Of a thickness exceeding 1.25 mmFree
  • Round wire
  • With a diameter of less than 1.5 mm
  • Heat treated
  • 7217.10.40.40 In coils weighing not more than 2 kilogramsFree
  • 7217.10.40.45 OtherFree
  • 7217.10.40.90 OtherFree
  • With a diameter of 1.5 mm or more
  • 7217.10.50.30 Heat treatedFree
  • 7217.10.50.90 OtherFree
  • 7217.10.60.00 Other wireFree
  • Other
  • 7217.10.70.00 Flat wireFree
  • Round wire
  • Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
  • 7217.10.80.10 Heat treatedFree
  • 7217.10.80.20 OtherFree
  • Containing by weight 0.6 percent or more of carbon
  • Heat treated
  • 7217.10.80.25 With a diameter of less than 1.0 mmFree
  • 7217.10.80.30 With a diameter of 1.0 mm or more but less than 1.5 mmFree
  • 7217.10.80.45 With a diameter of 1.5 mm or moreFree
  • Other
  • 7217.10.80.60 With a diameter of less than 1.0 mmFree
  • 7217.10.80.75 With a diameter of 1.0 mm or more but less than 1.5 mmFree
  • 7217.10.80.90 With a diameter of 1.5 mm or moreFree
  • 7217.10.90.00 Other wireFree

7217.20 Iron or non-alloy steel; wire, plated or coated with zinc

  • 7217.20.15.00 Flat wireFree
  • Round wire
  • 7217.20.30.00 With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbonFree
  • Other
  • With a diameter of less than 1.0 mm
  • 7217.20.45.10 Containing by weight less than 0.25 percent of carbonFree
  • 7217.20.45.20 Containing by weight 0.25 percent or more but less than 0.6 percent of carbonFree
  • 7217.20.45.30 Containing by weight 0.6 percent or more of carbonFree
  • With a diameter of 1.0 mm or more but less than 1.5 mm
  • 7217.20.45.40 Containing by weight less than 0.25 percent of carbonFree
  • 7217.20.45.50 Containing by weight 0.25 percent or more but less than 0.6 percent of carbonFree
  • 7217.20.45.60 Containing by weight 0.6 percent or more of carbonFree
  • With a diameter of 1.5 mm or more
  • 7217.20.45.70 Containing by weight 0.25 percent or more but less than 0.6 percent of carbonFree
  • 7217.20.45.80 Containing by weight 0.6 percent or more of carbonFree
  • Other
  • 7217.20.60.00 Containing by weight less than 0.25 percent of carbonFree
  • 7217.20.75.00 OtherFree

7217.30 Iron or non-alloy steel; wire, plated or coated with base metals (other than zinc)

  • Flat wire
  • 7217.30.15.30 Containing by weight 0.6 percent or more of carbonFree
  • 7217.30.15.60 OtherFree
  • Round wire
  • 7217.30.30.00 With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbonFree
  • Other
  • 7217.30.45.04 Containing by weight less than 0.20 percent of carbon, and suitable for electric arc weldingFree
  • Other
  • With a diameter of less than 1.0 mm
  • 7217.30.45.11 Containing by weight less than 0.25 percent of carbonFree
  • 7217.30.45.20 Containing by weight 0.25 percent or more but less than 0.6 percent or carbonFree
  • 7217.30.45.30 Containing by weight 0.6 percent or more of carbonFree
  • With a diameter of 1.0 mm or more but less than 1.5 mm
  • 7217.30.45.41 Containing by weight less than 0.25 percent of carbonFree
  • 7217.30.45.50 Containing by weight 0.25 percent or more but less than 0.6 percent of carbonFree
  • 7217.30.45.60 Containing by weight 0.6 percent or more of carbonFree
  • 7217.30.45.90 With a diameter of 1.5 mm or moreFree
  • Other
  • 7217.30.60.00 Containing by weight less than 0.25 percent of carbonFree
  • 7217.30.75.00 OtherFree

7217.90 Iron or non-alloy steel; wire, n.e.c. in heading no. 7217

  • 7217.90.10.00 Coated with plasticsFree
  • Other
  • 7217.90.50.30 Containing by weight less than 0.25 percent of carbonFree
  • 7217.90.50.60 Containing by weight 0.25 percent or more but less than 0.6 percent of carbonFree
  • 7217.90.50.90 Containing by weight 0.6 percent or more of carbonFree

7218 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel

7218.10 Steel, stainless; ingots and other primary forms

  • 7218.10.00.00 Ingots and other primary formsFree

7218.91 Steel, stainless; semi-finished products, of rectangular (other than square) cross-section

  • Having a width less than four times the thickness
  • 7218.91.00.15 Having a cross-sectional area of less than 232 cm2Free
  • 7218.91.00.30 Having a cross-sectional area of 232 cm2 or moreFree
  • 7218.91.00.60 Having a width at least four times the thicknessFree

7218.99 Steel, stainless; semi-finished products, other than of rectangular cross-section

  • Of square cross section
  • 7218.99.00.15 Having a cross-sectional area of less than 232 cm2Free
  • 7218.99.00.30 Having a cross-sectional area of 232 cm2 or moreFree
  • Of circular cross section
  • 7218.99.00.45 Having a cross-sectional area of less than 232 cm2Free
  • 7218.99.00.60 Having a cross-sectional area of 232 cm2 or moreFree
  • 7218.99.00.90 OtherFree

7219 Stainless steel; flat-rolled products of width of 600mm or more

7219.11 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness exceeding 10mm

  • 7219.11.00.30 Of a width not exceeding 1575 mmFree
  • 7219.11.00.60 Of a width exceeding 1575 mmFree

7219.12 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 4.75mm or more but not exceeding 10mm

  • 7219.12.00.02 Not annealed or not pickledFree
  • Other
  • 7219.12.00.06 Of high-nickel alloy steelFree
  • Other
  • Of a width of 1370 mm or more
  • Of a thickness exceeding 6.8 mm
  • 7219.12.00.21 Of a width not exceeding 1575 mmFree
  • 7219.12.00.26 Of a width exceeding 1575 mmFree
  • Other
  • 7219.12.00.51 Of a width not exceeding 1575 mmFree
  • 7219.12.00.56 Of a width exceeding 1575 mmFree
  • Other
  • Containing more than 0.5 percent by weight of nickel
  • 7219.12.00.66 Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
  • 7219.12.00.71 OtherFree
  • 7219.12.00.81 OtherFree

7219.13 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 3mm or more but less than 4.75mm

  • 7219.13.00.02 Not annealed or not pickledFree
  • Other
  • 7219.13.00.31 Of a width of 1370 mm or moreFree
  • Other
  • Containing more than 0.5 percent but less than 24 percent by weight of nickel
  • 7219.13.00.51 Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
  • 7219.13.00.71 OtherFree
  • 7219.13.00.81 OtherFree

7219.14 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of less than 3mm

  • 7219.14.00.30 Of a width of 1370 mm or moreFree
  • Other
  • 7219.14.00.65 Of high-nickel alloy steelFree
  • 7219.14.00.90 OtherFree

7219.21 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness exceeding 10mm

  • 7219.21.00.05 Of high-nickel alloy steelFree
  • Other
  • 7219.21.00.20 Of a width not exceeding 1575 mmFree
  • 7219.21.00.40 Of a width exceeding 1575 mm but not exceeding 1880 mmFree
  • 7219.21.00.60 Of a width exceeding 1880 mmFree

7219.22 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 4.75mm or more but not exceeding 10mm

  • 7219.22.00.05 Of high-nickel alloy steelFree
  • Other
  • Containing more than 0.5 percent by weight of nickel
  • Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
  • 7219.22.00.15 Of a width not exceeding 1575 mmFree
  • 7219.22.00.20 Of a width exceeding 1575 mm but not exceeding 1880 mmFree
  • 7219.22.00.25 Of a width exceeding 1880 mmFree
  • Other
  • 7219.22.00.35 Of a width not exceeding 1575 mmFree
  • 7219.22.00.40 Of a width exceeding 1575 mm but not exceeding 1880 mmFree
  • 7219.22.00.45 Of a width exceeding 1880 mmFree
  • Other
  • 7219.22.00.70 Of a width not exceeding 1575 mmFree
  • 7219.22.00.75 Of a width exceeding 1575 mm but not exceeding 1880 mmFree
  • 7219.22.00.80 Of a width exceeding 1880 mmFree

7219.23 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 3mm or more but less than 4.75mm

  • 7219.23.00.30 Of a width of 1370 mm or moreFree
  • 7219.23.00.60 OtherFree

7219.24 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of less than 3mm

  • 7219.24.00.30 Of a width of 1370 mm or moreFree
  • 7219.24.00.60 OtherFree

7219.31 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled or cold-reduced, of a thickness of 4.75mm or more

  • 7219.31.00.10 In coilsFree
  • 7219.31.00.50 Not in coilsFree

7219.32 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more but less than 4.75mm

  • In coils
  • Of a width of 1370 mm or more
  • 7219.32.00.05 Of high-nickel alloy steelFree
  • Other
  • 7219.32.00.20 Containing more than 0.5 percent by weight of nickelFree
  • 7219.32.00.25 OtherFree
  • Other
  • 7219.32.00.35 Of high-nickel alloy steelFree
  • Other
  • Containing more than 0.5 percent by weight of nickel
  • 7219.32.00.36 Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
  • 7219.32.00.38 OtherFree
  • Other
  • 7219.32.00.42 Containing less than 15 percent by weight of chromiumFree
  • 7219.32.00.44 OtherFree
  • Not in coils
  • 7219.32.00.45 Of a width of 1370 mm or moreFree
  • 7219.32.00.60 OtherFree

7219.33 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm

  • In coils
  • Of a width of 1370 mm or more
  • 7219.33.00.05 Of high-nickel alloy steelFree
  • Other
  • 7219.33.00.20 Containing more than 0.5 percent by weight of nickelFree
  • 7219.33.00.25 OtherFree
  • Other
  • 7219.33.00.35 Of high-nickel alloy steelFree
  • Other
  • Containing more than 0.5 percent by weight of nickel
  • 7219.33.00.36 Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
  • 7219.33.00.38 OtherFree
  • Other
  • 7219.33.00.42 Containing less than 15 percent by weight of chromiumFree
  • 7219.33.00.44 OtherFree
  • Not in coils
  • 7219.33.00.45 Of a width of 1370 mm or moreFree
  • Other
  • 7219.33.00.70 Containing more than 0.5 percent but less than 24 percent by weight of nickelFree
  • 7219.33.00.80 OtherFree

7219.34 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm

  • In coils
  • 7219.34.00.05 Of high-nickel alloy steelFree
  • Other
  • Containing more than 0.5 percent by weight of nickel
  • 7219.34.00.20 Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
  • 7219.34.00.25 OtherFree
  • Other
  • 7219.34.00.30 Containing less than 15 percent by weight of chromiumFree
  • 7219.34.00.35 OtherFree
  • 7219.34.00.50 Not in coilsFree

7219.35 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm

  • In coils
  • Containing more than 0.5 percent but less than 24 percent by weight of nickel
  • 7219.35.00.05 Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
  • 7219.35.00.15 OtherFree
  • Other
  • 7219.35.00.30 Containing less than 15 percent by weight of chromiumFree
  • 7219.35.00.35 OtherFree
  • 7219.35.00.50 Not in coilsFree

7219.90 Steel, stainless; flat-rolled, width 600mm or more, n.e.c. in heading no. 7219

  • 7219.90.00.10 Of high-nickel alloy steelFree
  • Other
  • Containing more than 0.5 percent by weight of nickel
  • 7219.90.00.20 Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
  • 7219.90.00.25 OtherFree
  • Other
  • 7219.90.00.60 Containing less than 15 percent by weight of chromiumFree
  • 7219.90.00.80 OtherFree

7220 Stainless steel; flat-rolled products of width less than 600mm

7220.11 Steel, stainless; flat-rolled, width less than 600mm, hot-rolled, of a thickness of 4.75mm or more

  • 7220.11.00.00 Of a thickness of 4.75 mm or moreFree

7220.12 Steel, stainless; flat-rolled, width less than 600mm, hot-rolled, of a thickness of less than 4.75mm

  • 7220.12.10.00 Of a width of 300 mm or moreFree
  • 7220.12.50.00 Of a width of less than 300 mmFree

7220.20 Steel, stainless; flat-rolled, width less than 600mm, cold-rolled

  • Of a width of 300 mm or more
  • Containing more than 0.5 percent but less than 24 percent by weight of nickel
  • 7220.20.10.10 Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
  • 7220.20.10.15 OtherFree
  • Other
  • 7220.20.10.60 Containing less than 15 percent by weight of chromiumFree
  • 7220.20.10.80 OtherFree
  • Of a width of less than 300 mm
  • Of a thickness exceeding 1.25 mm
  • 7220.20.60.05 Of high-nickel alloy steelFree
  • Other
  • Containing more than 0.5 percent by weight of nickel
  • 7220.20.60.10 Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
  • 7220.20.60.15 OtherFree
  • Other
  • 7220.20.60.60 Containing less than 15 percent by weight of chromiumFree
  • 7220.20.60.80 OtherFree
  • Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
  • 7220.20.70.05 Of high-nickel alloy steelFree
  • Other
  • Containing more than 0.5 percent by weight of nickel
  • 7220.20.70.10 Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
  • 7220.20.70.15 OtherFree
  • Other
  • 7220.20.70.60 Containing less than 15 percent by weight of chromiumFree
  • 7220.20.70.80 OtherFree
  • Of a thickness not exceeding 0.25 mm
  • 7220.20.80.00 Razor blade steelFree
  • Other
  • 7220.20.90.30 Containing more than 0.5 percent but less than 24 percent by weight of nickelFree
  • 7220.20.90.60 OtherFree

7220.90 Steel, stainless; flat-rolled, width less than 600mm, n.e.c. in heading no 7220

  • Containing more than 0.5 percent but less than 24 percent by weight of nickel
  • 7220.90.00.10 Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
  • 7220.90.00.15 OtherFree
  • Other
  • 7220.90.00.60 Containing less than 15 percent by weight of chromiumFree
  • 7220.90.00.80 OtherFree

7221 Stainless steel bars and rods, hot-rolled, in irregularly wound coils

7221.00 Steel, stainless; bars and rods, hot-rolled, in irregularly wound coils

  • 7221.00.00.05 Of high-nickel alloy steelFree
  • Other
  • Of circular cross section
  • With a diameter of less than 14 mm
  • 7221.00.00.17 Containing less than 8 percent by weight of nickelFree
  • 7221.00.00.18 Containing 8 percent or more but less than 24 percent by weight of nickelFree
  • 7221.00.00.30 With a diameter of 14 mm or more but less than 19 mmFree
  • 7221.00.00.45 With a diameter of 19 mm or moreFree
  • 7221.00.00.75 OtherFree

7222 Stainless steel bars and rods, angles, shapes and sections

7222.11 Steel, stainless; bars and rods, hot-rolled, hot-drawn or extruded, of circular cross-section

  • 7222.11.00.01 Electroslag or vacuum arc remeltedFree
  • 7222.11.00.06 Of high-nickel alloy steelFree
  • Other
  • With a maximum cross-sectional dimension of less than 152.4 mm
  • 7222.11.00.57 Containing less than 8 percent by weight of nickelFree
  • 7222.11.00.59 Containing 8 percent or more but less than 24 percent by weight of nickelFree
  • With a maximum cross-sectional dimension of 152.4 mm or more
  • 7222.11.00.82 Containing less than 8 percent by weight of nickelFree
  • 7222.11.00.84 Containing 8 percent or more but less than 24 percent by weight of nickelFree

7222.19 Steel, stainless; bars and rods, hot-rolled, hot-drawn or extruded, other than of circular cross-section

  • 7222.19.00.01 Electroslag or vacuum arc remeltedFree
  • Other
  • 7222.19.00.06 Of high-nickel alloy steelFree
  • Other
  • 7222.19.00.52 Containing less than 8 percent by weight of nickelFree
  • 7222.19.00.54 Containing 8 percent or more but less than 24 percent by weight of nickelFree

7222.20 Steel, stainless; bars and rods, cold-formed or cold-finished

  • 7222.20.00.01 Electroslag or vacuum arc remeltedFree
  • 7222.20.00.06 Of high-nickel alloy steelFree
  • Other
  • Of a circular cross-section
  • With a maximum circular cross-sectional dimension of less than 18 mm
  • 7222.20.00.41 Containing less than 8 percent by weight of nickelFree
  • 7222.20.00.43 Containing 8 percent or more but less than 24 percent by weight of nickelFree
  • With a maximum circular cross-sectional dimension of 18 mm or more and less than 152.4 mm
  • 7222.20.00.62 Containing less than 8 percent by weight of nickelFree
  • 7222.20.00.64 Containing 8 percent or more but less than 24 percent by weight of nickelFree
  • With a maximum circular cross-sectional dimension of 152.4 mm or more
  • 7222.20.00.67 Containing less than 8 percent by weight of nickelFree
  • 7222.20.00.69 Containing 8 percent or more but less than 24 percent by weight of nickelFree
  • Other
  • 7222.20.00.71 Containing less than 8 percent by weight of nickelFree
  • 7222.20.00.73 Containing 8 percent or more but less than 24 percent by weight of nickelFree

7222.30 Steel, stainless; bars and rods, n.e.c. in heading no. 7222

  • 7222.30.00.01 Electroslag or vacuum arc remeltedFree
  • 7222.30.00.12 Of high-nickel alloy steelFree
  • Other
  • With a maximum cross-sectional dimension of less than 152.4 mm
  • 7222.30.00.22 Containing less than 8 percent by weight of nickelFree
  • 7222.30.00.24 Containing 8 percent or more but less than 24 percent by weight of nickelFree
  • With a maximum cross-sectional dimension of 152.4 mm or more
  • 7222.30.00.82 Containing less than 8 percent by weight of nickelFree
  • 7222.30.00.84 Containing 8 percent or more but less than 24 percent by weight of nickelFree

7222.40 Steel, stainless; angles, shapes and sections

  • Hot-rolled, not drilled, not punched and not otherwise advanced
  • With a maximum cross-sectional dimension of 80 mm or more
  • 7222.40.30.25 AnglesFree
  • 7222.40.30.45 OtherFree
  • With a maximum cross-sectional dimension of less than 80 mm
  • 7222.40.30.65 AnglesFree
  • 7222.40.30.85 OtherFree
  • 7222.40.60.00 OtherFree

7223 Stainless steel wire

7223.00 Steel, stainless; wire

  • Round wire
  • 7223.00.10.05 Spring round wire of a kind described in statistical note 8 to this chapterFree
  • Other
  • 7223.00.10.16 With a diameter of less than 0.25 mmFree
  • 7223.00.10.31 With a diameter of 0.25 mm or more but less than 0.76 mmFree
  • 7223.00.10.46 With a diameter of 0.76 mm or more but less than 1.52 mmFree
  • 7223.00.10.61 With a diameter of 1.52 mm or more but less than 5.1 mmFree
  • 7223.00.10.76 With a diameter of 5.1 mm or moreFree
  • 7223.00.50.00 Flat wireFree
  • 7223.00.90.00 OtherFree

7224 Alloy steel in ingots or other primary forms, semi-finished products of other alloy steel

7224.10 Steel, alloy; ingots and other primary forms

  • 7224.10.00.05 Of high-nickel alloy steelFree
  • Other
  • 7224.10.00.45 Of tool steelFree
  • 7224.10.00.75 OtherFree

7224.90 Steel, alloy; semi-finished products

  • 7224.90.00.05 Of high-nickel alloy steelFree
  • Other
  • Of tool steel
  • Of rectangular (including square) cross section
  • 7224.90.00.15 Having a width less than four times the thicknessFree
  • 7224.90.00.25 Having a width at least four times the thicknessFree
  • 7224.90.00.35 OtherFree
  • Other
  • Of rectangular (including square) cross section
  • 7224.90.00.45 Having a width less than four times the thicknessFree
  • 7224.90.00.55 Having a width at least four times the thicknessFree
  • 7224.90.00.65 Of circular cross sectionFree
  • 7224.90.00.75 OtherFree

7225 Alloy steel flat-rolled products, of a width 600mm or more

7225.11 Steel, alloy; flat-rolled, width 600mm or more, of silicon-electrical steel, grain-oriented

  • 7225.11.00.00 Grain-orientedFree

7225.19 Steel, alloy; flat-rolled, width 600mm or more, of silicon-electrical steel, (other than grain-oriented)

  • 7225.19.00.00 OtherFree

7225.30 Steel, alloy; flat-rolled, width 600mm or more, hot-rolled, in coils

  • Of a thickness of 4.75 mm or more
  • Of tool steel
  • 7225.30.11.10 Of high-speed steelFree
  • 7225.30.11.80 OtherFree
  • Other
  • 7225.30.30.05 Of high-nickel alloy steelFree
  • 7225.30.30.50 OtherFree
  • Of a thickness of less than 4.75 mm
  • Of tool steel
  • 7225.30.51.10 Of high-speed steelFree
  • 7225.30.51.80 OtherFree
  • 7225.30.70.00 OtherFree

7225.40 Steel, alloy; flat-rolled, width 600mm or more, hot-rolled, not in coils

  • Of a thickness of 4.75 mm or more
  • Of tool steel
  • 7225.40.11.10 Of high-speed steelFree
  • 7225.40.11.80 OtherFree
  • Other
  • 7225.40.30.05 Of high-nickel alloy steelFree
  • 7225.40.30.50 OtherFree
  • Of a thickness of less than 4.75 mm
  • Of tool steel
  • 7225.40.51.10 Of high-speed steelFree
  • 7225.40.51.30 Of ball-bearing steelFree
  • 7225.40.51.60 OtherFree
  • 7225.40.70.00 OtherFree

7225.50 Steel, alloy; flat-rolled, width 600mm or more, cold-rolled

  • Of tool steel
  • 7225.50.11.10 Of high-speed steelFree
  • 7225.50.11.30 Of ball-bearing steelFree
  • 7225.50.11.60 OtherFree
  • Other
  • 7225.50.60.00 Of a thickness of 4.75 mm or moreFree
  • Of a thickness of less than 4.75 mm
  • 7225.50.70.00 Heat-resisting steelFree
  • Other
  • 7225.50.80.10 Of high-nickel alloy steelFree
  • 7225.50.80.80 OtherFree

7225.91 Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, electrolytically plated or coated with zinc

  • 7225.91.00.00 Electrolytically plated or coated with zincFree

7225.92 Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, plated or coated with zinc (other than electrolytically)

  • 7225.92.00.00 Otherwise plated or coated with zincFree

7225.99 Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, (other than plated or coated with zinc)

  • 7225.99.00.10 Of high-nickel alloy steelFree
  • 7225.99.00.90 OtherFree

7226 Alloy steel flat-rolled products, of a width of less than 600mm

7226.11 Steel, alloy; flat-rolled, width less than 600mm, of silicon-electrical steel, grain-oriented

  • 7226.11.10.00 Of a width of 300 mm or moreFree
  • Of a width of less than 300 mm
  • 7226.11.90.30 Of thickness not exceeding 0.25 mmFree
  • 7226.11.90.60 OtherFree

7226.19 Steel, alloy; flat-rolled, width less than 600mm, of silicon-electrical steel, other than grain-oriented

  • 7226.19.10.00 Of a width of 300 mm or moreFree
  • 7226.19.90.00 Of a width of less than 300 mmFree

7226.20 Steel, alloy; flat-rolled, width less than 600mm, of high speed steel

  • 7226.20.00.00 Of high-speed steelFree

7226.91 Steel, alloy; flat-rolled, width less than 600mm, (excluding silicon-electrical or high speed steel), hot-rolled

  • Of tool steel (other than high-speed steel)
  • 7226.91.05.00 Of chipper knife steelFree
  • Other
  • Of a width of 300 mm or more
  • 7226.91.15.30 Of ball-bearing steelFree
  • 7226.91.15.60 OtherFree
  • Of a width of less than 300 mm
  • 7226.91.25.30 Of ball-bearing steelFree
  • 7226.91.25.60 OtherFree
  • Other
  • 7226.91.50.00 Of a thickness of 4.75 mm or moreFree
  • Of a thickness of less than 4.75 mm
  • 7226.91.70.00 Of a width of 300 mm or moreFree
  • 7226.91.80.00 Of a width of less than 300 mmFree

7226.92 Steel, alloy; flat-rolled, width less than 600mm, (excluding silicon-electrical or high speed steel), cold-rolled

  • Of tool steel (other than high-speed steel)
  • Of a width of 300 mm or more
  • 7226.92.10.30 Of ball-bearing steelFree
  • 7226.92.10.60 OtherFree
  • Of a width of less than 300 mm
  • 7226.92.30.30 Of ball-bearing steelFree
  • 7226.92.30.60 OtherFree
  • Other
  • 7226.92.50.00 Of a width of 300 mm or moreFree
  • Of a width of less than 300 mm
  • Of a thickness not exceeding 0.25 mm
  • 7226.92.70.05 Of high-nickel alloy steelFree
  • 7226.92.70.50 OtherFree
  • Of a thickness exceeding 0.25 mm
  • 7226.92.80.05 Of high-nickel alloy steelFree
  • 7226.92.80.50 OtherFree

7226.99 Steel, alloy; flat-rolled, width less than 600mm, n.e.c. in item no. 7226.9

  • 7226.99.01.10 Electrolytically plated or coated with zincFree
  • 7226.99.01.30 Otherwise plated or coated with zincFree
  • 7226.99.01.80 OtherFree

7227 Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils

7227.10 Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, of high speed steel

  • 7227.10.00.00 Of high-speed steelFree

7227.20 Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, of silico-manganese steel

  • 7227.20.00.30 Of welding quality wire rods of a kind described in statistical note 7 to this chapterFree
  • 7227.20.00.80 OtherFree

7227.90 Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7227

  • Of tool steel (other than high-speed steel)
  • Not tempered, not treated, and not partly manufactured
  • 7227.90.10.30 Of ball-bearing steelFree
  • 7227.90.10.60 OtherFree
  • Other
  • 7227.90.20.30 Of ball-bearing steelFree
  • 7227.90.20.60 OtherFree
  • Other
  • 7227.90.60.05 Of high-nickel alloy steelFree
  • 7227.90.60.10 Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapterFree
  • 7227.90.60.20 Of welding quality wire rods of a kind described in statistical note 7 to this chapterFree
  • Of a circular cross section
  • 7227.90.60.30 With a diameter of less than 14 mmFree
  • 7227.90.60.35 With a diameter of 14 mm or more but less than 19 mmFree
  • 7227.90.60.40 With a diameter of 19 mm or moreFree
  • 7227.90.60.90 OtherFree

7228 Alloy steel bars, rods, shapes and sections; hollow drill bars and rods, of alloy or non-alloy steel

7228.10 Steel, alloy; bars and rods, of high speed steel

  • 7228.10.00.10 Not cold-formedFree
  • Cold-formed
  • 7228.10.00.30 With a maximum cross-sectional dimension of less than 18 mmFree
  • 7228.10.00.60 With a maximum cross-sectional dimension of 18 mm or moreFree

7228.20 Steel, alloy; bars and rods, of silico-manganese steel

  • 7228.20.10.00 Not cold-formedFree
  • 7228.20.50.00 Cold-formedFree

7228.30 Steel, alloy; bars and rods, hot-rolled, hot-drawn or extruded

  • Of tool steel (other than high-speed steel)
  • 7228.30.20.00 Of ball-bearing steelFree
  • 7228.30.40.00 Of chipper knife steel, not cold-formedFree
  • 7228.30.60.00 OtherFree
  • Other
  • 7228.30.80.05 Of high-nickel alloy steelFree
  • 7228.30.80.10 Concrete reinforcing bars and rodsFree
  • Other
  • 7228.30.80.15 With a diameter or cross section measuring less than 76 mmFree
  • 7228.30.80.41 With a diameter or cross section measuring 76 mm or more but not exceeding 152 mmFree
  • 7228.30.80.45 With a diameter or cross section measuring 152 mm or more but not exceeding 228 mmFree
  • 7228.30.80.70 With a diameter or cross section exceeding 228 mmFree

7228.40 Steel, alloy; bars and rods, forged

  • 7228.40.00.00 Other bars and rods, not further worked than forgedFree

7228.50 Steel, alloy; bars and rods, cold-formed or cold-finished

  • Of tool steel (other than high-speed steel)
  • 7228.50.10.10 Of ball-bearing steelFree
  • Other
  • With a maximum cross-sectional dimension of less than 18 mm
  • 7228.50.10.20 Of round or rectangular cross section with surfaces ground, milled or polishedFree
  • 7228.50.10.40 OtherFree
  • With a maximum cross-sectional dimension of 18 mm or more
  • 7228.50.10.60 Of round or rectangular cross section with surfaces ground, milled or polishedFree
  • 7228.50.10.80 OtherFree
  • Other
  • 7228.50.50.05 Of high-nickel alloy steelFree
  • Other
  • 7228.50.50.15 With a diameter or cross section measuring less than 76 mmFree
  • 7228.50.50.40 With a diameter or cross section measuring 76 mm or more but not exceeding 228 mmFree
  • 7228.50.50.70 With a diameter or cross section exceeding 228 mmFree

7228.60 Steel, alloy; bars and rods n.e.c. in heading no. 7228

  • Of tool steel (other than high-speed steel)
  • 7228.60.10.30 Of ball-bearing steelFree
  • 7228.60.10.60 OtherFree
  • Other
  • 7228.60.60.00 Not cold-formedFree
  • 7228.60.80.00 Cold-formedFree

7228.70 Steel, alloy; angles, shapes and sections

  • Hot-rolled, not drilled, not punched and not otherwise advanced
  • 7228.70.30.10 U, I, H and T sectionsFree
  • Other
  • With a maximum cross-sectional dimension of 76 mm or more
  • 7228.70.30.20 AnglesFree
  • 7228.70.30.41 OtherFree
  • With a maximum cross-sectional dimension of less than 76 mm
  • 7228.70.30.60 AnglesFree
  • 7228.70.30.81 OtherFree
  • 7228.70.60.00 OtherFree

7228.80 Steel, alloy or non-alloy; hollow drill bars and rods

  • 7228.80.00.00 Hollow drill bars and rodsFree

7229 Wire of other alloy steel

7229.20 Steel, alloy; wire, of silico-manganese steel

  • Round, with a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon, more than 0.9 percent of manganese, and more than 0.6 percent of silicon, and suitable for electric arc welding
  • 7229.20.00.10 Plated or coated with copperFree
  • 7229.20.00.15 OtherFree
  • 7229.20.00.90 OtherFree

7229.90 Steel, alloy; wire, of materials other than silico-manganese steel

  • 7229.90.05.00 Of high-speed steelFree
  • Other
  • 7229.90.10.00 Flat wireFree
  • Round wire
  • With a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon and more than 0.3 percent of nickel or more than 0.08 percent of molybdenum, and suitable for electric arc welding
  • 7229.90.50.06 Plated or coated with copperFree
  • 7229.90.50.08 OtherFree
  • Other
  • 7229.90.50.16 With a diameter of less than 1.0 mmFree
  • 7229.90.50.31 With a diameter of 1.0 mm or more but less than 1.5 mmFree
  • 7229.90.50.51 With a diameter of 1.5 mm or moreFree
  • 7229.90.90.00 Other wireFree

MFN rates from the Harmonized Tariff Schedule as published, without preferences, quotas, trade remedies or additional measures. Inferred works those out for each product and origin. Whether a product from this chapter qualifies for a lower rate depends on each agreement's product-specific rule for it, under the agreements we cover.