Book a demo

87 Vehicles; other than railway or tramway rolling stock, and parts and accessories thereof

UK Global Tariff · MFN rates

Chapter 86Chapter 88

8701 Tractors; (other than tractors of heading no 8709)

8701.10 Tractors; single axle

  • 8701.10.00.00 Single axle tractors2%

8701.21 Tractors; road tractors for semi-trailers, with only compression-ignition internal combustion piston engine (diesel or semi-diesel)

  • 8701.21.10.00 New10%
  • 8701.21.90.00 Used10%

8701.22 Tractors; road tractors for semi-trailers, with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motors for propulsion

  • 8701.22.10.00 New10%
  • 8701.22.90.00 Used10%

8701.23 Tractors; road tractors for semi-trailers, with both spark-ignition internal combustion piston engine and electric motors for propulsion

  • 8701.23.10.00 New10%
  • 8701.23.90.00 Used10%

8701.24 Tractors; road tractors for semi-trailers, with only electric motors for propulsion

  • 8701.24.10.00 New10%
  • 8701.24.90.00 Used10%

8701.29 Tractors; road tractors for semi-trailers, with other propulsion methods n.e.c. in item no 8701.2

  • 8701.29.00.00 Other10%

8701.30 Tractors; track-laying

  • 8701.30.00.00 Track-laying tractorsFree

8701.91 Tractors; n.e.c. in heading no 8701 (other than tractors of heading no 8709); of an engine power not exceeding 18kW

  • 8701.91.10.00 Agricultural tractors and forestry tractors, wheeledFree
  • 8701.91.90.00 Other6%

8701.92 Tractors; n.e.c. in heading no 8701 (other than tractors of heading no 8709); of an engine power exceeding 18kW but not exceeding 37kW

  • 8701.92.10.00 Agricultural tractors and forestry tractors, wheeledFree
  • 8701.92.90.00 Other6%

8701.93 Tractors; n.e.c. in heading no 8701 (other than tractors of heading no 8709); of an engine power exceeding 37kW but not exceeding 75kW

  • 8701.93.10.00 Agricultural tractors and forestry tractors, wheeledFree
  • 8701.93.90.00 Other6%

8701.94 Tractors; n.e.c. in heading no 8701 (other than tractors of heading no 8709); of an engine power exceeding 75kW but not exceeding 130kW

  • 8701.94.10.00 Agricultural tractors and forestry tractors, wheeledFree
  • 8701.94.90.00 Other6%

8701.95 Tractors; n.e.c. in heading no 8701 (other than tractors of heading no 8709); of an engine power exceeding 130kW

  • 8701.95.10.00 Agricultural tractors and forestry tractors, wheeledFree
  • 8701.95.90.00 Other6%

8702 Vehicles; public transport passenger type

8702.10 Vehicles; public transport type (carries 10 or more persons, including driver), with only compression-ignition internal combustion piston engine (diesel or semi-diesel), new or used

  • Of a cylinder capacity exceeding 2 500 cm3
  • 8702.10.11.00 New16%
  • 8702.10.19.00 Used16%
  • Of a cylinder capacity not exceeding 2 500 cm3
  • 8702.10.91.00 New10%
  • 8702.10.99.00 Used10%

8702.20 Vehicles; public transport type (carries 10 or more persons, including driver), with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor for propulsion, new or used

  • 8702.20.10.00 Of a cylinder capacity exceeding 2 500 cm316%
  • 8702.20.90.00 Of a cylinder capacity not exceeding 2 500 cm310%

8702.30 Vehicles; public transport type (carries 10 or more persons, including driver), with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor for propulsion, new or used

  • 8702.30.10.00 Of a cylinder capacity exceeding 2 800 cm316%
  • 8702.30.90.00 Of a cylinder capacity not exceeding 2 800 cm310%

8702.40 Vehicles; public transport type (carries 10 or more persons, including driver), with only electric motor for propulsion, new or used

  • 8702.40.00.00 With only electric motor for propulsion10%

8702.90 Vehicles; public transport type (carries 10 or more persons, including driver), n.e.c. in heading 8702, new or used

  • With spark-ignition internal combustion piston engine
  • Of a cylinder capacity exceeding 2 800 cm3
  • 8702.90.11.00 New16%
  • 8702.90.19.00 Used16%
  • Of a cylinder capacity not exceeding 2 800 cm3
  • 8702.90.31.00 New10%
  • 8702.90.39.00 Used10%
  • 8702.90.90.00 With other engines10%

8703 Motor cars and other motor vehicles; principally designed for the transport of persons (other than those of heading no. 8702), including station wagons and racing cars

8703.10 Vehicles; specially designed for travelling on snow, golf cars and similar vehicles

  • 8703.10.11.00 Vehicles specially designed for travelling on snow, with compression-ignition internal combustion piston engine (diesel or semi-diesel), or with spark-ignition internal combustion piston engine4%
  • 8703.10.18.00 Other10%

8703.21 Vehicles; with only spark-ignition internal combustion piston engine, cylinder capacity not over 1000cc

  • 8703.21.10.00 New10%
  • 8703.21.90.00 Used10%

8703.22 Vehicles; with only spark-ignition internal combustion piston engine, cylinder capacity over 1000 but not over 1500cc

  • 8703.22.10.00 New10%
  • 8703.22.90.00 Used10%

8703.23 Vehicles; with only spark-ignition internal combustion reciprocating piston engine, cylinder capacity over 1500 but not over 3000cc

  • New
  • 8703.23.11.00 Motor caravans10%
  • 8703.23.19.00 Other10%
  • 8703.23.90.00 Used10%

8703.24 Vehicles; with only spark-ignition internal combustion reciprocating piston engine, cylinder capacity over 3000cc

  • 8703.24.10.00 New10%
  • 8703.24.90.00 Used10%

8703.31 Vehicles; with only compression-ignition internal combustion piston engine (diesel or semi-diesel), cylinder capacity not over 1500cc

  • 8703.31.10.00 New10%
  • 8703.31.90.00 Used10%

8703.32 Vehicles; with only compression-ignition internal combustion piston engine (diesel or semi-diesel), cylinder capacity over 1500 but not over 2500cc

  • New
  • 8703.32.11.00 Motor caravans10%
  • 8703.32.19.00 Other10%
  • 8703.32.90.00 Used10%

8703.33 Vehicles; with only compression-ignition internal combustion piston engine (diesel or semi-diesel), cylinder capacity over 2500cc

  • New
  • 8703.33.11.00 Motor caravans10%
  • 8703.33.19.00 Other10%
  • 8703.33.90.00 Used10%

8703.40 Vehicles; with both spark-ignition internal combustion piston engine and electric motor for propulsion, incapable of being charged by plugging to external source of electric power

  • New
  • 8703.40.10.10 Of a cylinder capacity not exceeding 1 000 cm310%
  • 8703.40.10.90 Other10%
  • Used
  • 8703.40.90.10 Of a cylinder capacity not exceeding 1 000 cm310%
  • 8703.40.90.90 Other10%

8703.50 Vehicles; with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor for propulsion, incapable of being charged by plugging to external source of electric power

  • 8703.50.00.00 Other vehicles, with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion, other than those capable of being charged by plugging to external source of electric power10%

8703.60 Vehicles; with both spark-ignition internal combustion piston engine and electric motor for propulsion, capable of being charged by plugging to external source of electric power

  • New
  • 8703.60.10.10 Of a cylinder capacity not exceeding 1 000 cm310%
  • 8703.60.10.90 Other10%
  • Used
  • 8703.60.90.10 Of a cylinder capacity not exceeding 1 000 cm310%
  • 8703.60.90.90 Other10%

8703.70 Vehicles; with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor for propulsion, capable of being charged by plugging to external source of electric power

  • 8703.70.00.00 Other vehicles, with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion, capable of being charged by plugging to external source of electric power10%

8703.80 Vehicles; with only electric motor for propulsion

  • New
  • 8703.80.10.10 New battery electric vehicles, principally designed for the transport of nine or less persons, including the driver, excluding l category vehicles according to regulation (eu) no 168/2013 and motorcycles, propelled (regardless of the number of wheels set in motion) solely by one or more electric motors, including those with an internal combustion range extender (an auxiliary power unit)10%
  • 8703.80.10.90 Other10%
  • 8703.80.90.00 Used10%

8703.90 Vehicles; for transport of persons (other than those of heading no. 8702) n.e.c. in heading no. 8703

  • 8703.90.00.00 Other10%

8704 Vehicles; for the transport of goods

8704.10 Vehicles; dumpers, designed for off-highway use, for transport of goods

  • 8704.10.10.00 With compression-ignition internal combustion piston engine (diesel or semi-diesel), or with spark-ignition internal combustion piston engineFree
  • 8704.10.90.00 OtherFree

8704.21 Vehicles; with only compression-ignition internal combustion piston engine (diesel or semi-diesel), for transport of goods, (of a gvw not exceeding 5 tonnes), n.e.c. in item no 8704.1

  • 8704.21.10.00 Specially designed for the transport of highly radioactive materials2%
  • Other
  • With engines of a cylinder capacity exceeding 2 500 cm3
  • 8704.21.31.00 New10%
  • 8704.21.39.00 Used10%
  • With engines of a cylinder capacity not exceeding 2 500 cm3
  • 8704.21.91.00 New10%
  • 8704.21.99.00 Used10%

8704.22 Vehicles; with only compression-ignition internal combustion piston engine (diesel or semi-diesel), for transport of goods, (of a g.v.w. exceeding 5 tonnes but not exceeding 20 tonnes), n.e.c. in item no 8704.1

  • 8704.22.10.00 Specially designed for the transport of highly radioactive materials2%
  • Other
  • 8704.22.91.00 New10%
  • 8704.22.99.00 Used10%

8704.23 Vehicles; with only compression-ignition internal combustion piston engine (diesel or semi-diesel), for transport of goods, (of a g.v.w. exceeding 20 tonnes), n.e.c. in item no 8704.1

  • 8704.23.10.00 Specially designed for the transport of highly radioactive materials2%
  • Other
  • 8704.23.91.00 New10%
  • 8704.23.99.00 Used10%

8704.31 Vehicles; with only spark-ignition internal combustion piston engine, for transport of goods, (of a g.v.w. not exceeding 5 tonnes), n.e.c. in item no 8704.1

  • 8704.31.10.00 Specially designed for the transport of highly radioactive materials2%
  • Other
  • With engines of a cylinder capacity exceeding 2 800 cm3
  • 8704.31.31.00 New10%
  • 8704.31.39.00 Used10%
  • With engines of a cylinder capacity not exceeding 2 800 cm3
  • 8704.31.91.00 New10%
  • 8704.31.99.00 Used10%

8704.32 Vehicles; with only spark-ignition internal combustion piston engine, for transport of goods, (of a g.v.w. exceeding 5 tonnes), n.e.c. in item no 8704.1

  • 8704.32.10.00 Specially designed for the transport of highly radioactive materials2%
  • Other
  • 8704.32.91.00 New10%
  • 8704.32.99.00 Used10%

8704.41 Vehicles; with both compression-ignition internal combustion piston engine (diesel/semi-diesel) and electric motor as motor for propulsion, unassembled as in section 14, (gvw not exceeding 5000kg), for the transport of goods, vans

  • 8704.41.10.00 Specially designed for the transport of highly radioactive materials2%
  • Other
  • With engines of a cylinder capacity exceeding 2 500 m³
  • 8704.41.31.00 New10%
  • 8704.41.39.00 Used10%
  • With engines of a cylinder capacity not exceeding 2 500 cm³
  • 8704.41.91.00 New10%
  • 8704.41.99.00 Used10%

8704.42 Vehicles; with both compression-ignition internal combustion piston engine (diesel/semi-diesel) and electric motors for propulsion, of a g.v.w. exceeding 5,000kg but not exceeding 20,000kg

  • 8704.42.10.00 Specially designed for the transport of highly radioactive materials2%
  • Other
  • 8704.42.91.00 New10%
  • 8704.42.99.00 Used10%

8704.43 Vehicles; with both compression-ignition internal combustion piston engine (diesel/semi-diesel) and electric motors for propulsion, of a g.v.w. exceeding 20,000kg

  • 8704.43.10.00 Specially designed for the transport of highly radioactive materials2%
  • Other
  • 8704.43.91.00 New10%
  • 8704.43.99.00 Used10%

8704.51 Vehicles; with both spark-ignition internal combustion piston engine and electric motors for propulsion, of a g.v.w. not exceeding 5,000kg

  • 8704.51.10.00 Specially designed for the transport of highly radioactive materials2%
  • Other
  • With engines of a cylinder capacity exceeding 2 800 cm³
  • 8704.51.31.00 New10%
  • 8704.51.39.00 Used10%
  • With engines of a cylinder capacity not exceeding 2 800 cm³
  • 8704.51.91.00 New10%
  • 8704.51.99.00 Used10%

8704.52 Vehicles; with both spark-ignition internal combustion piston engine and electric motors for propulsion, of a g.v.w. exceeding 5,000kg

  • 8704.52.10.00 Specially designed for the transport of highly radioactive materials2%
  • Other
  • 8704.52.91.00 New10%
  • 8704.52.99.00 Used10%

8704.60 Vehicles; with only electric motor for propulsion

  • 8704.60.00.00 Other with only electric motor for propulsion10%

8704.90 Vehicles; for transport of goods, n.e.c. in heading no. 8704

  • 8704.90.00.00 Other10%

8705 Special purpose motor vehicles; not those for the transport of persons or goods (e.g. breakdown lorries, road sweeper lorries, spraying lorries, mobile workshops, mobile radiological units etc)

8705.10 Vehicles; crane lorries

  • 8705.10.00.11 New mobile cranes, meaning cable-controlled or hydraulic-powered cranes, designed for the lifting, lowering and horizontal movement of materials on land, with a lifting capacity of at least 30 tonnes, mounted on self-propelled vehicles, regardless of their propulsion systemmobile cranesFree
  • 8705.10.00.90 OtherFree

8705.20 Vehicles; mobile drilling derricks

  • 8705.20.00.00 Mobile drilling derricksFree

8705.30 Vehicles; fire fighting vehicles

  • 8705.30.00.00 Fire fighting vehiclesFree

8705.40 Vehicles; concrete-mixer lorries

  • 8705.40.00.00 Concrete-mixer lorriesFree

8705.90 Vehicles; break-down lorries, road-sweepers, spraying lorries, mobile workshops, mobile radiological units, and other special purpose vehicles n.e.c. in heading no. 8705

  • 8705.90.30.00 Concrete-pumping vehiclesFree
  • 8705.90.80.00 OtherFree

8706 Chassis; fitted with engines, for the motor vehicles of heading no. 8701 to 8705

8706.00 Chassis; fitted with engines, for the motor vehicles of heading no. 8701 to 8705

  • Chassis for tractors of heading 8701; chassis for motor vehicles of heading 8702, 8703 or 8704, with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity exceeding 2 800 cm3
  • 8706.00.11.00 For vehicles of heading 8702 or 870418%
  • 8706.00.19.00 Other6%
  • Other
  • 8706.00.91.00 For vehicles of heading 87034%
  • 8706.00.99.00 Other10%

8707 Bodies; (including cabs) for the motor vehicles of heading no. 8701 to 8705

8707.10 Vehicles; bodies (including cabs) for the motor vehicles of heading no. 8703

  • 8707.10.10.00 For industrial assembly purposes4%
  • 8707.10.90.00 Other4%

8707.90 Vehicles; bodies (including cabs) for the motor vehicles of heading no. 8701, 8702, 8704 or 8705

  • 8707.90.10.00 For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; special purpose motor vehicles of heading 87054%
  • 8707.90.90.00 Other4%

8708 Motor vehicles; parts and accessories, of heading no. 8701 to 8705

8708.10 Vehicles; bumpers and parts thereof, for the vehicles of heading no. 8701 to 8705

  • For the industrial assembly of: vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705
  • 8708.10.10.10 Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of chapter 87—
  • 8708.10.10.90 Other—
  • Other
  • 8708.10.90.10 Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of chapter 874%
  • 8708.10.90.90 Other4%

8708.21 Vehicles; parts of bodies, safety seat belts

  • 8708.21.10.00 For the industrial assembly of: vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705—
  • 8708.21.90.00 Other4%

8708.22 Vehicles; parts and accessories, front windscreens (windshields), rear windows and other windows specified in subheading note 1 to this chapter

  • 8708.22.10.00 For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705—
  • 8708.22.90.00 Other4%

8708.29 Vehicles; parts and accessories, of bodies, other than safety seat belts

  • For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705
  • 8708.29.10.11 Specific pre-assembled or ready-to assemble sections for new mobile cranes—
  • 8708.29.10.99 Other—
  • Other
  • 8708.29.90.11 Specific pre-assembled or ready-to assemble sections for new mobile cranes4%
  • 8708.29.90.99 Other4%

8708.30 Vehicle parts; brakes, servo-brakes and parts thereof

  • For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705
  • 8708.30.10.40 Body of disc type brake in bir ("ball in ramp") or epb ("electronic parking brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of chapter 87—
  • 8708.30.10.70 Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of chapter 87—
  • 8708.30.10.90 Other2%
  • Other
  • For disc brakes
  • 8708.30.91.30 Body of disc type brake in bir ("ball in ramp") or epb ("electronic parking brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of chapter 874%
  • 8708.30.91.40 Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of chapter 874%
  • 8708.30.91.90 Other4%
  • 8708.30.99.00 Other4%

8708.40 Vehicle parts; gear boxes and parts thereof

  • For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705
  • 8708.40.20.20 Automatic hydrodynamic gearbox - with a hydraulic torque converter, - without transfer box and cardan shaft, - whether or not with front differential, for use in the manufacture of motor vehicles of chapter 87—
  • 8708.40.20.25 Transmission assembly consisting of: -double pinion type planetary gear shifting mechanism, -sport sequential shiftmatic system with a speed of 7 or more but not more than 10, -a width of 280 mm or more but no more than 470 mm, -a height of 350 mm or more but no more than 595 mm, -a length of 410 mm or more but no more than 690 mm, -a weight of 70 kg or more but no more than 110 kg, for use in the manufacture of motor vehicles of subheading 8703 22 and 8703 23—
  • 8708.40.20.70 Manual gearbox in cast aluminium housing for transverse installation with: - maximum dimensions of 550 x 500 x 600mm -five or six gears, -a differential gear, -an engine torque of 400 nm or less, for use in the manufacture of motor vehicles of heading 8703Free
  • 8708.40.20.80 Transmission gearbox without torque converter, with: - dual clutch, - 7 or more forward gears, - 1 reverse gear, - a maximum torque of 450nm, - whether or not with electric motor integrated, - a height of 350mm or more but not more than 600mm, - a width 350mm or more but not more than 600mm, and - a weight of 70kg or more but not more than 110kg, for use in the manufacture of motor vehicles of heading 8703Free
  • 8708.40.20.90 Other—
  • Other
  • Gear boxes
  • 8708.40.50.10 Automatic hydrodynamic gearbox - with a hydraulic torque converter, - without transfer box and cardan shaft, - whether or not with front differential, for use in the manufacture of motor vehicles of chapter 874%
  • 8708.40.50.25 Transmission assembly housing 3 other shafts inside it and offering a rotating switch for shift position, consisting of: -cast aluminium body, -differential gear, -2 electrical motors and gears, -a width of 280 mm or more but no more than 470 mm, -a height of 350 mm or more but no more than 595 mm, -a length of 410 mm or more but no more than 690 mm, for use in the manufacture of motor vehicles of subheadings 8703 40 and 8703 604%
  • 8708.40.50.60 Manual gearbox in cast aluminium housing for transverse installation with: - maximum dimensions of 550 x 500 x 600mm -five or six gears, -a differential gear, -an engine torque of 400 nm or less, for use in the manufacture of motor vehicles of heading 87034%
  • 8708.40.50.70 Automatic transmission equipped with double clutch system with: -at least 8 gears, -an engine torque of 800 nm or more, -an electronic differential, -a p-lock safety system, and -a tcu transmission control unit, for use in the manufacture of motor vehicles of heading 87034%
  • 8708.40.50.90 Other4%
  • Parts
  • 8708.40.91.00 Of closed-die forged steel4%
  • 8708.40.99.00 Other2%

8708.50 Vehicle parts; drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof

  • For the industrial assembly of: vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705
  • 8708.50.20.15 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened—
  • 8708.50.20.18 Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1,4 m or more but not more than 2,4 m, for use in the production of goods of chapter 87—
  • 8708.50.20.20 Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg—
  • 8708.50.20.25 Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened—
  • 8708.50.20.35 Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened—
  • 8708.50.20.50 Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87—
  • 8708.50.20.55 Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened—
  • 8708.50.20.70 Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves—
  • 8708.50.20.75 Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees—
  • 8708.50.20.80 Specific pre-assembled or ready-to assemble sections for new mobile cranes—
  • 8708.50.20.90 Other2%
  • Other
  • Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles
  • 8708.50.35.11 Specific pre-assembled or ready-to assemble sections for new mobile cranes4%
  • 8708.50.35.90 Other4%
  • Parts
  • Of closed-die forged steel
  • 8708.50.55.11 Specific pre-assembled or ready-to assemble sections for new mobile cranes4%
  • 8708.50.55.20 Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 874%
  • 8708.50.55.50 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened4%
  • Other
  • 8708.50.55.91 Specific pre-assembled or ready-to assemble sections for new mobile cranes4%
  • 8708.50.55.99 Other4%
  • Other
  • For non-driving axles
  • 8708.50.91.10 Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 874%
  • 8708.50.91.11 Specific pre-assembled or ready-to assemble sections for new mobile cranes4%
  • 8708.50.91.90 Other4%
  • Other
  • 8708.50.99.10 Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg2%
  • 8708.50.99.25 Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves2%
  • 8708.50.99.35 Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees2%
  • 8708.50.99.40 Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 872%
  • 8708.50.99.45 Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened2%
  • 8708.50.99.50 Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened2%
  • 8708.50.99.60 Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened2%
  • 8708.50.99.70 Specific pre-assembled or ready-to assemble sections for new mobile cranes2%
  • 8708.50.99.90 Other2%

8708.70 Vehicle parts; road wheels and parts and accessories thereof

  • For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705
  • Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres
  • 8708.70.10.15 Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121—
  • 8708.70.10.50 Other—
  • Other
  • Road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, for the industrial assembly of vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm³ or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm³; vehicles of heading 8705
  • 8708.70.10.80 Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121—
  • 8708.70.10.85 Other—
  • Other
  • 8708.70.10.92 Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121—
  • 8708.70.10.95 Other—
  • Other
  • Wheels of aluminium; parts and accessories of wheels, of aluminium
  • Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres
  • 8708.70.50.15 Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 1214%
  • 8708.70.50.50 Other4%
  • Other
  • 8708.70.50.80 Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 1214%
  • 8708.70.50.85 Other4%
  • Wheel centres in star form, cast in one piece, of iron or steel
  • 8708.70.91.15 Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 1212%
  • 8708.70.91.90 Other2%
  • Other
  • Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121
  • 8708.70.99.20 Road wheels of steel, whether or not with their accessories4%
  • 8708.70.99.30 Other4%
  • Other
  • 8708.70.99.80 Road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, designed for - road tractors, - motor vehicles for the transport of persons and/or the transport of goods, - special purpose motor vehicles (for example, fire fighting vehicles, spraying lorries); excluding: - wheels for road quad bikes, - wheels for motor vehicles specifically designed for uses other than on public roads (for example, wheels for agricultural tractors or forestry tractors, for forklifts, for pushback tractors, for dumpers designed for off-highway use)4%
  • 8708.70.99.85 Other4%

8708.80 Vehicle parts; suspension systems and parts thereof (including shock-absorbers)

  • For the industrial assembly of: vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705
  • 8708.80.20.10 Upper strut insulator containing - a metal holder with three mounting screws, and - a rubber bump for use in the manufacture of goods of chapter 87—
  • 8708.80.20.90 Other—
  • Other
  • Suspension shock-absorbers
  • 8708.80.35.10 Upper strut insulator containing - a metal holder with three mounting screws, and - a rubber bump for use in the manufacture of goods of chapter 874%
  • 8708.80.35.90 Other4%
  • 8708.80.55.00 Anti roll bars; other torsion bars2%
  • Other
  • 8708.80.91.00 Of closed-die forged steel4%
  • Other
  • 8708.80.99.30 Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles: -with a chrome coating, -of a diameter of 11 mm or more, but not more than 28 mm, -of a length of 80 mm or more, but not more than 600 mm, with a threaded end or a mandrel for resistance welding2%
  • 8708.80.99.90 Other2%

8708.91 Vehicle parts; radiators and parts thereof

  • For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705
  • 8708.91.20.20 Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of chapter 87—
  • 8708.91.20.30 Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard en ac 42100 or en ac 43000 t6 with - an insulating area flatness of not more than 0,1 mm, - a permissible particle quantity of 0,3 mg per tank, - a distance between pores of 2 mm or more, - pore sizes of not more than 0,4 mm, and - not more than 3 pores larger than 0,2mm -with a weight of 0,2kg or more but not more than 3kg—
  • 8708.91.20.90 Other—
  • Other
  • Radiators
  • 8708.91.35.10 Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of chapter 874%
  • 8708.91.35.20 Turbocharger cooling duct containing: -an aluminum alloy duct with at least one metal holder and at least two mounting holes, -a rubber pipe with clips, -a stainless steel flange highly resistant to corrosion [sus430jil], for use in the manufacture of compression ignition engines of motor vehicles4%
  • 8708.91.35.30 Two-circuit aluminum heat exchanger for automatic transmission of passenger cars: -of the stack-plate type, -with two pairs of inlet and outlet, each for the coolant/water circuit and the transmission oil circuit, -with at least two mounting holes, -whether or not with the connection hoses, for use in the manufacture of goods of chapter 874%
  • 8708.91.35.40 Radiators: -with corrosion protection, -for pressures up to 150 psi (1034 kpa), -with individual replaceable, cooling tubes in brass or copper, for use in the production of engine and charge air cooling with a weight of 265 kg or more but not more than 599 kg4%
  • 8708.91.35.90 Other4%
  • Parts
  • 8708.91.91.00 Of closed-die forged steel4%
  • Other
  • 8708.91.99.30 Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard en ac 42100 or en ac 43000 t6 with - an insulating area flatness of not more than 0,1 mm, - a permissible particle quantity of 0,3 mg per tank, - a distance between pores of 2 mm or more, - pore sizes of not more than 0,4 mm, and - not more than 3 pores larger than 0,2mm -with a weight of 0,2kg or more but not more than 3kg2%
  • 8708.91.99.90 Other2%

8708.92 Vehicle parts; silencers (mufflers) and exhaust pipes; parts thereof

  • 8708.92.20.00 For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705—
  • Other
  • 8708.92.35.00 Silencers (mufflers) and exhaust pipes4%
  • Parts
  • 8708.92.91.00 Of closed-die forged steel4%
  • 8708.92.99.00 Other2%

8708.93 Vehicle parts; clutches and parts thereof

  • 8708.93.10.00 For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705—
  • 8708.93.90.00 Other4%

8708.94 Vehicle parts; steering wheels, steering columns and steering boxes; parts thereof

  • 8708.94.20.00 For the industrial assembly of: vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705—
  • Other
  • 8708.94.35.00 Steering wheels, steering columns and steering boxes4%
  • Parts
  • 8708.94.91.00 Of closed-die forged steel4%
  • Other
  • 8708.94.99.10 Hub gear made of cold rolled carbon steel (per astm a1008), molded into the plastic and pressed on pinion, with: -an outer diameter of 81,2 mm or more, but not more than 82,55 mm, -an inner diameter of 25,9 mm or more, but not more than 25,97 mm, -a height of the lower side of inner diameter of 11,63 mm or more, but not more than 12,13 mm, -a height of the upper side of inner diameter of 3,25 mm or more, but not more than 3,5 mm, -an overall height of 11,63 mm or more, but not more than 19,5 mm for use in the manufacture of vehicle's steering system2%
  • 8708.94.99.20 Intermediate steering shaft forming part of the steering column with: -a torsional rigidity of 25 nm/degree or more, -a tubular male shaft in welded carbon steel tube (per gb/t 699 grade 20), -a tubular female shaft in welded carbon steel tube (per with gb/t 699 grade 20), -two spiders universal joint made of chromium alloy steel (per gb/t 5216 grade 20crmntih), -a length in nominal telescope position of 396 mm or more but not more than 467 mm, -a coupling interface on both ends with internal toothing, -two cardan joints on both sides, -a telescope shaft function with a range of 74 mm or more but not more than 115 mm, for use in the manufacture of vehicle's steering system2%
  • 8708.94.99.30 Lower assist shaft as part of the steering column made of carbon steel (per gb/t699 grade 45 or jis g4051 grade s45c) with: -an ultimate torsional strength load of 325 nm or more and johnson apparent elastic limit (j.a.e.l) values of 275 nm or more, -a length of 66,39 mm or more but not more than 88,64 mm, -an outer diameter of 27,47 mm or more but not more than 28,38 mm, -an inner hole of diameter 6,50 mm or more but not more than 6,58 mm, -an external 26-teeth spline with major diameter 21,18 mm or more but not more than 21,44 mm, -a knurling on a part of outer surface of major diameter 26,0 mm or more but not more than 26,1 mm, -with or without an external 24-tooth spline and with a major diameter 24,75 mm or more but not more than 25 mm, for use in the manufacture of vehicle's steering system2%
  • 8708.94.99.40 Upper assist shaft as part of the steering column made of carbon steel (per gb/t699 grade 45) with: -an ultimate torsional strength load of 325 nm or more and johnson apparent elastic limit (j.a.e.l) values of 275 nm or more, -a length of 165,3 mm or more but not more than 204,2 mm, -an outer diameter of 22,87 mm or more but not more than 22,92 mm, -an internal hole of diameter 6,50 or more but not more than 6,58 mm, -an external spline, for use in the manufacture of vehicle's steering system2%
  • 8708.94.99.50 Lower shaft as part of the steering column made of aluminium alloy (per astm b221m grade 6105), air quenched and tempered with: -an ultimate torsional strength of 260 nm or more, -a length of 296,7 mm or more but not more than 297,8 mm, -an external 18-tooth spline on all shaft length with major diameter of 28,7 mm or more but not more than 29 mm, -an 18-tooth internal spline with a minor diameter of 19,7 mm or more but not more than 20 mm, for use in the manufacture of vehicle's steering system2%
  • 8708.94.99.60 Torsion bar as part of the steering column made of carbon alloy steel (per sae j1268, grade 5160h of modified chemistry for carbon content of 0,53 or more, but not more than 0,56) with: -a shaft torsional stiffness of 2,5 nm/degree or more but not more than 2,7 nm/degree, -a length of 107,75 mm or more but not more than 108,25 mm, -an outer diameter of 6,38 mm or more but not more than 6,42 mm, -two external 18-tooth splines on both shaft ends with a major diameter of 6,70 mm or more but not more than 6,85 mm, as interface to pressing with matting input and output shafts, -entire surface shot peened, for use in the manufacture of vehicle's steering system2%
  • 8708.94.99.70 Tubular steering shaft as part of the steering column made of carbon steel welded tube (per en 10305/2, e235 c or gb/t699 grade 20) with: -an ultimate torsional strength of 300 nm or more and johnson apparent elastic limit (j.a.e.l) values of 275 nm or more, -a length of 245,48 mm or more but not more than 287,5 mm, -an outer diameter of 23,95 mm or more but not more than 32,25 mm, -an interface for steering wheel connection either in a form of an external 40-tooth spline with major diameter of 17,1 mm or more but not more than 17,5 mm and an internal thread m12x1,75-6h or in a form of an external hexagon with a short diagonal of 15,05 mm or more but not more than 15,35mm and an internal thread m10x1.5-6h, -an interface either in a form of an internal 10-tooth spline of length of 98.0 mm or more but not more than 160 mm, with minor diameter of 16,1 mm or more but not more than 16,4 mm or in a form of an internal 48-tooth spline of length of 151 mm or more but not more than 160 mm, with minor diameter of 23,2 mm or more but not more than 23,3 mm, for use in the manufacture of vehicle's steering system2%
  • 8708.94.99.80 Blank assembly worm gear, consisting of a hub of carbon steel (gb/t 699 grade 25 or din en 10277 grade 11smn30) and a ring of cast polyamide 6/12 with: - an outer diameter of 97,35 mm or more, but not more than 102,65 mm, - an inner diameter of 27,91 mm or more, but not more than 27,93 mm, - a height of the hub of 11,75 mm or more, but not more than 12,00 mm, - an overall height of 16,00 mm or more, but not more than 18,00 mm2%
  • 8708.94.99.90 Other2%

8708.95 Vehicle parts; safety airbags with inflater system; parts thereof

  • For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705
  • 8708.95.10.20 Inflatable safety cushion of high strength polyamide fibre: - sewn, - folded, - with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing - suitable for cool inflator technology—
  • 8708.95.10.30 Inflatable sewn safety cushion of high strength polyamide fibre: -folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or -flat safety cushion with or without thermal folding—
  • 8708.95.10.90 Other2%
  • Other
  • 8708.95.91.00 Of closed-die forged steel4%
  • Other
  • 8708.95.99.30 Inflatable safety cushion of high strength polyamide fibre: - sewn, - folded, - with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing - suitable for cool inflator technology2%
  • 8708.95.99.40 Inflatable sewn safety cushion of high strength polyamide fibre: -folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or -flat safety cushion with or without thermal folding2%
  • 8708.95.99.50 Airbag inflator containing pyrotechnics, whether or not cold gas, as propellant for safety airbags of vehicles, in each individual consignment of 1 000 pieces or more2%
  • 8708.95.99.90 Other2%

8708.99 Vehicle parts and accessories; n.e.c. in heading no. 8708

  • For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705
  • 8708.99.10.55 Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film2%
  • 8708.99.10.60 Aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm, -width of more than 10 mm but not more than 250 mm, -length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys enac-46100 or enac-42100 (based on the norm en:1706) with following characteristics: -internal porosity not more than 1 mm, -outer porosity not more than 2 mm, -rockwell hardness hrb 10 or more, of a kind used in the production of suspensions systems for engines in motor vehicles—
  • 8708.99.10.80 Specific pre-assembled or ready-to assemble sections for new mobile cranes—
  • 8708.99.10.90 Other—
  • Other
  • Of closed-die forged steel
  • 8708.99.93.11 Specific pre-assembled or ready-to assemble sections for new mobile cranes4%
  • 8708.99.93.90 Other4%
  • Other
  • 8708.99.97.22 Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film2%
  • 8708.99.97.27 Inner pole electromagnet core used in magneto-rheological engine mounts to reduce shocks and for isolation and damping in passenger cars: -of a powder metal assembly, -with a diameter of not more than 90,95 mm, -with an overall height of 24,5 mm, -impregnated with sealant, -zinc plated2%
  • 8708.99.97.43 Outer tie rod with a housing made of aisi 4137 (scm435) steel or en10083/2- c45r n steel or jis g4053-scm435 low alloy steel, with: -a ball stud made of en 10263/4 - 41crs4 q t steel or aisi 4137 (scm435) steel or en10083/3-42crmos4q t steel or jis g4053-scm435 low alloy steel, -a polyoxymethylene plastic ball seat, -a distance between the end of the threaded hole and the centre of the ball stud of 124 mm or more but not more than 194 mm, -a ball stud diameter of 21,98 mm or more but no more than 22 mm, -a threaded hole depth of 40,5 mm or more but no more than 52 mm with dimensions m14x1,5, -a boot seal, -a boot seal protector and retaining ring, -lubricant, for use in the manufacture of vehicle's steering system2%
  • 8708.99.97.50 Aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm, -width of more than 10 mm but not more than 250 mm, -length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys enac-46100 or enac-42100 (based on the norm en:1706) with following characteristics: -internal porosity not more than 1 mm, -outer porosity not more than 2 mm, -rockwell hardness hrb 10 or more, of a kind used in the production of suspensions systems for engines in motor vehicles2%
  • 8708.99.97.53 Roll rod assembly for the front suspension in vehicles for connecting the stabilizer to the suspension components: -made of aluminum, rubber, and plastic, -with a height of 270 mm or more, but not more than 300 mm, -with a width of 50 mm or more, but not more than 65 mm, -with a length of 150 mm or more, but not more than 170 mm, for use in the manufacture of motor vehicles2%
  • 8708.99.97.58 Mounting bracket of front radiator or intercooler: -made of iron or steel or of plastics, -whether or not with rubber cushioning, for use in the manufacture of goods of heading 87082%
  • 8708.99.97.75 Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of chapter 872%
  • 8708.99.97.80 Specific pre-assembled or ready-to assemble sections for new mobile cranes2%
  • 8708.99.97.90 Other2%

8709 Works trucks, self-propelled, (not fitted with lifting or handling equipment), for factories, warehouses etc, for short distance transport of goods, tractors used on railway station platforms; parts thereof

8709.11 Vehicles; electrical, self-propelled, (not fitted with lifting or handling equipment), of the type used for short distance transport of goods in factories, warehouses, dock areas or airports

  • 8709.11.10.00 Specially designed for the transport of highly radioactive materialsFree
  • 8709.11.90.00 OtherFree

8709.19 Vehicles; (not electrical), self-propelled, without handling equipment, used for short distance transport of goods in factories, airports and such, and tractors of the type used on railway station platforms

  • 8709.19.10.00 Specially designed for the transport of highly radioactive materialsFree
  • 8709.19.90.00 OtherFree

8709.90 Vehicles; parts of the vehicles of heading no. 8709

  • 8709.90.00.00 PartsFree

8710 Tanks and other armoured fighting vehicles; motorised, whether or not fitted with weapons, and parts of such vehicles

8710.00 Tanks and other armoured fighting vehicles; motorised, whether or not fitted with weapons, and parts of such vehicles

  • 8710.00.00.00 Tanks and other armoured fighting vehicles, motorised, whether or not fitted with weapons, and parts of such vehiclesFree

8711 Motorcycles (including mopeds) and cycles; fitted with an auxiliary motor, with or without side-cars; side-cars

8711.10 Motorcycles (including mopeds) and cycles; fitted with an auxiliary motor, with internal combustion piston engine of a cylinder capacity not exceeding 50cc, with or without side-cars; side-cars

  • 8711.10.00.00 With internal combustion piston engine of a cylinder capacity not exceeding 50 cm38%

8711.20 Motorcycles (including mopeds) and cycles; fitted with an auxiliary motor, internal combustion piston engine, of cylinder capacity exceeding 50cc but not exceeding 250cc, with or without side-cars; side-cars

  • 8711.20.10.00 Scooters8%
  • Other, of a cylinder capacity
  • 8711.20.92.00 Exceeding 50 cm3 but not exceeding 125 cm38%
  • 8711.20.98.00 Exceeding 125 cm3 but not exceeding 250 cm38%

8711.30 Motorcycles (including mopeds) and cycles; fitted with an auxiliary motor, internal combustion piston engine, of cylinder capacity exceeding 250cc but not exceeding 500cc, with or without side-cars; side-cars

  • 8711.30.10.00 Of a cylinder capacity exceeding 250 cm3 but not exceeding 380 cm36%
  • 8711.30.90.00 Of a cylinder capacity exceeding 380 cm3 but not exceeding 500 cm36%

8711.40 Motorcycles (including mopeds) and cycles; fitted with auxiliary motor, internal combustion piston engine of cylinder capacity exceeding 500cc but not exceeding 800cc, with or without sidecars; side-cars

  • 8711.40.00.00 With internal combustion piston engine of a cylinder capacity exceeding 500 cm3 but not exceeding 800 cm36%

8711.50 Motorcycles (including mopeds) and cycles; fitted with auxiliary motor, with internal combustion piston engine of a cylinder capacity exceeding 800cc, with or without side-cars; side-cars

  • 8711.50.00.00 With internal combustion piston engine of a cylinder capacity exceeding 800 cm36%

8711.60 Motorcycles (including mopeds) and cycles; fitted with auxiliary motor, with electric motor for propulsion, with or without side-cars; side-cars

  • 8711.60.10.00 Bicycles, tricycles and quadricycles, with pedal assistance, with an auxiliary electric motor with a continuous rated power not exceeding 250 watts6%
  • Other
  • 8711.60.90.10 Cycles, with pedal assistance, with an auxiliary electric motor6%
  • 8711.60.90.90 Other6%

8711.90 Motorcycles (including mopeds) and cycles; n.e.c. in heading no. 8711, fitted with auxiliary motor, with or without side-cars; side-cars

  • 8711.90.00.00 Other6%

8712 Bicycles and other cycles; including delivery tricycles, not motorised

8712.00 Bicycles and other cycles; including delivery tricycles, not motorised

  • Bicycles with ball bearings
  • 8712.00.30.10 Consigned from indonesia, malaysia, sri lanka or tunisia14%
  • 8712.00.30.20 Consigned from cambodia, pakistan or the philippines14%
  • 8712.00.30.90 Other14%
  • Other
  • 8712.00.70.10 Unicycles14%
  • Other
  • 8712.00.70.91 Consigned from indonesia, malaysia, sri lanka or tunisia15%
  • 8712.00.70.92 Consigned from cambodia, pakistan or the philippines15%
  • 8712.00.70.99 Other15%

8713 Carriages for disabled persons; whether or not motorised or otherwise mechanically propelled

8713.10 Carriages for disabled persons; not mechanically propelled

  • 8713.10.00.00 Not mechanically propelledFree

8713.90 Carriages for disabled persons; mechanically propelled

  • 8713.90.00.00 OtherFree

8714 Vehicles; parts and accessories of heading no. 8711 to 8713

8714.10 Motorcycles (including mopeds); parts and accessories

  • 8714.10.10.00 Brakes and parts thereof2%
  • 8714.10.20.00 Gear boxes and parts thereof2%
  • 8714.10.30.00 Road wheels and parts and accessories thereof2%
  • 8714.10.40.00 Silencers (mufflers) and exhaust pipes; parts thereof2%
  • 8714.10.50.00 Clutches and parts thereof2%
  • Other
  • 8714.10.90.70 Motor bikes radiators in consignment of 100 pieces or more2%
  • 8714.10.90.90 Other2%

8714.20 Carriages for disabled persons; parts and accessories thereof

  • 8714.20.00.00 Of carriages for disabled personsFree

8714.91 Cycles; frames and forks, and parts thereof

  • Frames
  • Painted, anodised, polished and/or lacquered
  • Originating in or consigned from china: - in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or - to be transferred to another holder of an end-use authorisation or to exempted parties
  • 8714.91.10.21 Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)4%
  • 8714.91.10.25 Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)4%
  • 8714.91.10.29 Other4%
  • Other
  • 8714.91.10.31 Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)4%
  • 8714.91.10.35 Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)4%
  • 8714.91.10.39 Other4%
  • Other
  • 8714.91.10.75 Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)4%
  • 8714.91.10.77 Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)4%
  • 8714.91.10.89 Other4%
  • Front forks
  • Painted, anodised, polished and/or lacquered
  • Originating in or consigned from china: - in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or - to be transferred to another holder of an end-use authorisation or to exempted parties
  • 8714.91.30.25 Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)4%
  • 8714.91.30.29 Other4%
  • Other
  • 8714.91.30.35 Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)4%
  • 8714.91.30.39 Other4%
  • Other
  • 8714.91.30.72 Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)4%
  • 8714.91.30.89 Other4%
  • 8714.91.90.00 Parts4%

8714.92 Cycles; parts thereof, wheel rims and spokes

  • 8714.92.10.00 Rims4%
  • 8714.92.90.00 Spokes4%

8714.93 Cycles; parts thereof, hubs (other than coaster braking hubs and hub brakes) and free-wheel sprocket-wheels

  • Free-wheel sprocket-wheels
  • 8714.93.00.11 Originating in or consigned from china: - in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or - to be transferred to another holder of an end-use authorisation or to exempted parties4%
  • 8714.93.00.19 Other4%
  • 8714.93.00.20 Gear set to connect sprockets: -for mounting on a hub drum, -with 7 sprockets or more but not more than 12 sprockets, -with 10 or more but not more than 52 teeth for each sprocket, -with a weight of 200 g or more but not more than 800 g, -sprockets made of nickel-plated steel or aluminium, -with connectors (spacers) between the sprockets made of plastic or aluminium, -without a pawl mechanism, for use in the manufacture of bicycles and e-bikes4%
  • 8714.93.00.90 Other4%

8714.94 Cycles; parts thereof, brakes, including coaster braking hubs and hub-brakes, and parts thereof

  • Brakes
  • 8714.94.20.05 Coaster braking hubs and hub brakes4%
  • Other brakes
  • 8714.94.20.91 Originating in or consigned from china: - in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or - to be transferred to another holder of an end-use authorisation or to exempted parties4%
  • 8714.94.20.99 Other4%
  • Parts
  • Brake levers
  • 8714.94.90.11 Originating in or consigned from china: - in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or - to be transferred to another holder of an end-use authorisation or to exempted parties4%
  • 8714.94.90.19 Other4%
  • 8714.94.90.90 Other4%

8714.95 Cycles; parts thereof, saddles

  • 8714.95.00.00 Saddles4%

8714.96 Cycles; parts, pedals and crank-gear, and parts thereof

  • Pedals
  • 8714.96.10.10 Pedals, for use in the manufacture of bicycles (including electric bicycles)4%
  • 8714.96.10.90 Other4%
  • Crank-gear
  • 8714.96.30.10 Originating in or consigned from china: - in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or - to be transferred to another holder of an end-use authorisation or to exempted parties4%
  • 8714.96.30.90 Other4%
  • 8714.96.90.00 Parts4%

8714.99 Cycles; parts thereof, n.e.c. in item no. 8714.9

  • Handlebars
  • Originating in or consigned from china: - in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or - to be transferred to another holder of an end-use authorisation or to exempted parties
  • 8714.99.10.20 Bicycle handlebars, - with or without integrated stem, - either made out of carbon fibres and synthetic resin or made of aluminium, for use in the manufacture of bicycles (including electric bicycles)4%
  • 8714.99.10.29 Other4%
  • Other
  • 8714.99.10.89 Bicycle handlebars, - with or without integrated stem, - either made out of carbon fibres and synthetic resin or made of aluminium, for use in the manufacture of bicycles (including electric bicycles)4%
  • 8714.99.10.99 Other4%
  • 8714.99.30.00 Luggage carriers4%
  • Derailleur gears
  • Originating in or consigned from china: - in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or - to be transferred to another holder of an end-use authorisation or to exempted parties
  • 8714.99.50.11 Derailleur gears, consisting of: -rear derailleur and mounting articles, -with or without front derailleur, for use in the manufacture of bicycles (including electric bicycles)4%
  • 8714.99.50.19 Other4%
  • Other
  • 8714.99.50.91 Derailleur gears, consisting of: -rear derailleur and mounting articles, -with or without front derailleur, for use in the manufacture of bicycles (including electric bicycles)4%
  • 8714.99.50.99 Other4%
  • Other; parts
  • Complete wheels with or without tubes, tyres and sprockets
  • 8714.99.90.11 Originating in or consigned from china: - in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or - to be transferred to another holder of an end-use authorisation or to exempted parties4%
  • 8714.99.90.19 Other4%
  • 8714.99.90.30 Seat posts, for use in the manufacture of bicycles (including electric bicycles)4%
  • 8714.99.90.40 Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles)4%
  • 8714.99.90.50 Rear air shock absorber in form of a pneumatic spring element with oil damper for use in the manufacture of bicycles, including electrical bicycles4%
  • 8714.99.90.89 Other4%

8715 Baby carriages and parts thereof

8715.00 Baby carriages and parts thereof

  • 8715.00.10.00 Baby carriages2%
  • 8715.00.90.00 Parts2%

8716 Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof

8716.10 Trailers and semi-trailers; of the caravan type, for housing or camping

  • 8716.10.92.00 Of a weight not exceeding 1 600 kgFree
  • 8716.10.98.00 Of a weight exceeding 1 600 kgFree

8716.20 Trailers and semi-trailers; self-loading or self-unloading, for agricultural purposes

  • 8716.20.00.00 Self-loading or self-unloading trailers and semi-trailers for agricultural purposesFree

8716.31 Tanker trailers and tanker semi-trailers

  • 8716.31.00.00 Tanker trailers and tanker semi-trailersFree

8716.39 Trailers and semi-trailers; (other than tanker type)

  • 8716.39.10.00 Specially designed for the transport of highly radioactive materialsFree
  • Other
  • New
  • 8716.39.30.00 Semi-trailersFree
  • 8716.39.50.00 OtherFree
  • 8716.39.80.00 UsedFree

8716.40 Trailers and semi-trailers; n.e.c. in item no. 8716.3

  • 8716.40.00.00 Other trailers and semi-trailersFree

8716.80 Vehicles; n.e.c. in heading no. 8716

  • 8716.80.00.00 Other vehiclesFree

8716.90 Trailers, semi-trailers and other vehicles not mechanically propelled; parts thereof for heading no. 8716

  • 8716.90.10.00 ChassisFree
  • 8716.90.30.00 BodiesFree
  • 8716.90.50.00 AxlesFree
  • Other parts
  • Aluminium road wheels of vehicles of cn heading 8716, whether or not with their accessories and whether or not fitted with tyres
  • 8716.90.90.15 Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121Free
  • 8716.90.90.50 OtherFree
  • Other
  • Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121
  • 8716.90.90.95 Road wheels of steel, whether or not with their accessoriesFree
  • 8716.90.90.96 OtherFree
  • Other
  • 8716.90.90.97 Road wheels of steel, designed for trailers or semi-trailers, not mechanically propelled, of road tractors, whether or not with their accessories and whether or not fitted with tyresFree
  • 8716.90.90.98 OtherFree

MFN rates from the UK Global Tariff as published, without preferences, quotas, trade remedies or additional measures. Inferred works those out for each product and origin. Whether a product from this chapter qualifies for a lower rate depends on each agreement's product-specific rule for it, under the agreements we cover.