Book a demo

7228 Alloy steel bars, rods, shapes and sections; hollow drill bars and rods, of alloy or non-alloy steel

Harmonized Tariff Schedule · MFN rates · Chapter 72, Iron and steel

72277229

7228.10 Steel, alloy; bars and rods, of high speed steel

  • 7228.10.00.10 Not cold-formedFree
  • Cold-formed
  • 7228.10.00.30 With a maximum cross-sectional dimension of less than 18 mmFree
  • 7228.10.00.60 With a maximum cross-sectional dimension of 18 mm or moreFree

7228.20 Steel, alloy; bars and rods, of silico-manganese steel

  • 7228.20.10.00 Not cold-formedFree
  • 7228.20.50.00 Cold-formedFree

7228.30 Steel, alloy; bars and rods, hot-rolled, hot-drawn or extruded

  • Of tool steel (other than high-speed steel)
  • 7228.30.20.00 Of ball-bearing steelFree
  • 7228.30.40.00 Of chipper knife steel, not cold-formedFree
  • 7228.30.60.00 OtherFree
  • Other
  • 7228.30.80.05 Of high-nickel alloy steelFree
  • 7228.30.80.10 Concrete reinforcing bars and rodsFree
  • Other
  • 7228.30.80.15 With a diameter or cross section measuring less than 76 mmFree
  • 7228.30.80.41 With a diameter or cross section measuring 76 mm or more but not exceeding 152 mmFree
  • 7228.30.80.45 With a diameter or cross section measuring 152 mm or more but not exceeding 228 mmFree
  • 7228.30.80.70 With a diameter or cross section exceeding 228 mmFree

7228.40 Steel, alloy; bars and rods, forged

  • 7228.40.00.00 Other bars and rods, not further worked than forgedFree

7228.50 Steel, alloy; bars and rods, cold-formed or cold-finished

  • Of tool steel (other than high-speed steel)
  • 7228.50.10.10 Of ball-bearing steelFree
  • Other
  • With a maximum cross-sectional dimension of less than 18 mm
  • 7228.50.10.20 Of round or rectangular cross section with surfaces ground, milled or polishedFree
  • 7228.50.10.40 OtherFree
  • With a maximum cross-sectional dimension of 18 mm or more
  • 7228.50.10.60 Of round or rectangular cross section with surfaces ground, milled or polishedFree
  • 7228.50.10.80 OtherFree
  • Other
  • 7228.50.50.05 Of high-nickel alloy steelFree
  • Other
  • 7228.50.50.15 With a diameter or cross section measuring less than 76 mmFree
  • 7228.50.50.40 With a diameter or cross section measuring 76 mm or more but not exceeding 228 mmFree
  • 7228.50.50.70 With a diameter or cross section exceeding 228 mmFree

7228.60 Steel, alloy; bars and rods n.e.c. in heading no. 7228

  • Of tool steel (other than high-speed steel)
  • 7228.60.10.30 Of ball-bearing steelFree
  • 7228.60.10.60 OtherFree
  • Other
  • 7228.60.60.00 Not cold-formedFree
  • 7228.60.80.00 Cold-formedFree

7228.70 Steel, alloy; angles, shapes and sections

  • Hot-rolled, not drilled, not punched and not otherwise advanced
  • 7228.70.30.10 U, I, H and T sectionsFree
  • Other
  • With a maximum cross-sectional dimension of 76 mm or more
  • 7228.70.30.20 AnglesFree
  • 7228.70.30.41 OtherFree
  • With a maximum cross-sectional dimension of less than 76 mm
  • 7228.70.30.60 AnglesFree
  • 7228.70.30.81 OtherFree
  • 7228.70.60.00 OtherFree

7228.80 Steel, alloy or non-alloy; hollow drill bars and rods

  • 7228.80.00.00 Hollow drill bars and rodsFree

MFN rates from the Harmonized Tariff Schedule as published, without preferences, quotas, trade remedies or additional measures. Inferred works those out for each product and origin. Whether a product from this heading qualifies for a lower rate depends on each agreement's product-specific rule for it, under the agreements we cover.

Every line in chapter 72