3920 Plastics; plates, sheets, film, foil and strip (not self-adhesive); non-cellular and not reinforced, laminated, supported or similarly combined with other materials, n.e.c. in chapter 39

3920.10 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of polymers of ethylene, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• Of a thickness not exceeding 0,125 mm
• Of polyethylene having a specific gravity of
• Less than 0,94
• 3920.10.23.00 Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits—
• Stretch film, not printed
• 3920.10.24.10 For use in certain types of aircraft6.5%
• 3920.10.24.90 Other6.5%
• Other
• 3920.10.25.05 For use in certain types of aircraft6.5%
• 3920.10.25.90 Other6.5%
• 0,94 or more
• 3920.10.28.10 For use in certain types of aircraft6.5%
• 3920.10.28.99 Other6.5%
• Other
• 3920.10.40.10 For use in certain types of aircraft6.5%
• 3920.10.40.99 Other6.5%
• Of a thickness exceeding 0,125 mm
• 3920.10.81.00 Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agentFree
• Other
• 3920.10.89.10 For use in certain types of aircraft6.5%
• Other
• 3920.10.89.40 Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8 mm or more but not exceeding 1.2 mm6.5%
• 3920.10.89.90 Other6.5%

3920.20 Plastics; of polymers of propylene, plates, sheets, film, foil and strip (not self-adhesive), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• Of a thickness not exceeding 0,10 mm
• Biaxially oriented
• 3920.20.21.10 For use in certain types of aircraft6.5%
• 3920.20.21.50 Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron6.5%
• 3920.20.21.90 Other6.5%
• Other
• 3920.20.29.10 For use in certain types of aircraft6.5%
• Other
• 3920.20.29.70 Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: a thickness of 55 µm or more but not more than 97 µm; a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, and a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa6.5%
• 3920.20.29.94 Mono-axial oriented, co-extruded film: consisting of 3 to 5 layers; each layer mainly consisting of polypropylene and/or polyethylene; each layer containing not more than 10 % by weight of other polymers; whether or not containing titanium dioxide in the core layer; of an overall thickness of not more than 75 μm6.5%
• 3920.20.29.99 Other6.5%
• Of a thickness exceeding 0,10 mm
• 3920.20.80.10 For use in certain types of aircraft6.5%
• 3920.20.80.90 Other6.5%

3920.30 Plastics; of polymers of styrene, plates, sheets, film, foil and strip (not self-adhesive), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.30.00.10 Acrylonitrile-butadiene-styrene, for use in certain types of aircraft6.5%
• 3920.30.00.30 Opaque layer, whether or not printed, biaxially oriented, high impact polystyrene foil in rolls with: a thickness of 0,229 mm or more but not more than 0,279 mm; an titanium dioxide content by weight of 3 % or more but not more than 3,5 %; on one side a highly hydrophobic, chemically neutral and non-reactive coating6.5%
• 3920.30.00.90 Other6.5%

3920.43 Plastics; polymers of vinyl chloride, containing by weight not less than 6% of plasticisers; plates, sheets, film, foil and strip (not self-adhesive), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• Of a thickness not exceeding 1 mm
• 3920.43.10.10 For use in certain types of aircraft6.5%
• Other
• 3920.43.10.92 Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 µm or more but not more than 80 µm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride)6.5%
• 3920.43.10.95 Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet6.5%
• 3920.43.10.99 Other6.5%
• Of a thickness exceeding 1 mm
• 3920.43.90.10 For use in certain types of aircraft6.5%
• 3920.43.90.90 Other6.5%

3920.49 Plastics; polymers of vinyl chloride, containing by weight, less than 6% of plasticisers; plates, sheets, film, foil and strip (not self-adhesive), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• Of a thickness not exceeding 1 mm
• 3920.49.10.10 For use in certain types of aircraft6.5%
• Other
• 3920.49.10.30 Film of a (polyvinyl)chloride-copolymer: containing by weight 45 % or more of fillers; on a support6.5%
• 3920.49.10.99 Other6.5%
• Of a thickness exceeding 1 mm
• 3920.49.90.10 For use in certain types of aircraft6.5%
• 3920.49.90.90 Other6.5%

3920.51 Plastics; of acrylic polymers, polymethyl methacrylate, plates, sheets, film, foil and strip (not self-adhesive), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.51.00.20 Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm6.5%
• 3920.51.00.30 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 125μm6.5%
• 3920.51.00.40 Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)6.5%
• 3920.51.00.50 Sheets of polymethylmethacrylate conforming to standard: EN 4364 (MIL-P-5425E) and DTD5592A, or EN 4365 (MIL-P-8184) and DTD5592A6.5%
• 3920.51.00.90 Other6.5%

3920.59 Plastics; of acrylic polymers (excluding polymethyl methacrylate), plates, sheets, film, foil and strip (not self-adhesive), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.59.10.00 Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150 micrometresFree
• 3920.59.90.00 Other6.5%

3920.61 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of polycarbonates, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.61.00.30 Reflecting sheet: of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern; covered on one or both sides with one or more layers of plastic or metallisation, and whether or not covered on one side with a self-adhesive layer and a release sheet6.5%
• 3920.61.00.40 Extruded thermoplastic foils or films of polycarbonate with: matt surface texture on both sides; a thickness of more than 50 μm but not more than 200 μm; a width of 800 mm or more, but not more than 1 500 mm, and a length of 300 m or more, but not more 2500 m; for use in the production of retroreflective products6.5%
• 3920.61.00.50 Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a: total thickness of more than 230 μm but not more than 270 μm; top layer thickness of more than 40 μm but not more than 55 μm; defined surface roughness of the top layer of 0,5 μm or less (according to ISO 4287); UV-stabilized top layer6.5%
• 3920.61.00.90 Other6.5%

3920.62 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of poly(ethylene terephthalate), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• Of a thickness not exceeding 0,35 mm
• 3920.62.12.00 Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates—
• Other
• 3920.62.19.05 Poly(ethylene terephthalate) film in rolls: with a thickness of 0,335 mm or more but not more than 0,365 mm, and coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm6.5%
• 3920.62.19.08 Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either: only dyed in the mass, or dyed in the mass and metallised on one side6.5%
• 3920.62.19.28 Non-transparent poly(ethylene terephthalate) film: each outer layer with a thickness of 7 nm or more but not more than 80 nm; with a tensile strength of 300 N/cm or more (ASTM D-882); with a total thickness of 200 µm or more but not more than 350 µm, and with a width of 600 mm or more but not more than 1 600 mm; covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites6.5%
• 3920.62.19.32 Transparent poly(ethylene terephthalate) film: having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not; with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin; with a light transmittance of more than 70 %; with a haze value of not more than 1,3 %; with a total thickness of 10 µm or more but not more than 350 µm; with a width of 800 mm or more but not more than 1 600 mm6.5%
• 3920.62.19.38 Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm6.5%
• 3920.62.19.48 Sheets or rolls of poly(ethylene terephthalate): coated on both sides with a layer of epoxy acrylic resin; of a total thickness of 37 μm (± 3 μm)6.5%
• 3920.62.19.52 Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 µm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D 257 method)6.5%
• 3920.62.19.60 Poly (ethylene terephtalate) film: of a thickness of not more than 20 µm; coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm6.5%
• 3920.62.19.70 Poly(ethylene terephthalate) film in rolls with: a thickness of 35 μm or more, but not more than 75 μm; a tensile strength of 40 MPa or more in the machine direction (MD) and 200 MPa or more in the transverse direction (TD); an elongation at break of 400 % or more in MD and 30 % or more in TD; a heat shrinkage (in water at 90 °C/10s) in MD of 0,49 % or more, but not more than 0,51 %; a dynamic heat shrinkage (between 55 °C and 70 °C ) in TD of not more than 20 percentage points; a light transmittance of 85 % or more; a haze ratio of not more than 6 %; a surface tension of 38 mN/m or more; a density of 1,30 g/cm³ or more, but not more than 1,34 g/cm³; a shelf life declared by the manufacturer of not less than 12 months6.5%
• 3920.62.19.79 Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with: a thickness of 0.07 mm or more but not more than 0.15 mm; a width of 762 mm or more but not more than 1350 mm6.5%
• 3920.62.19.85 Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (FCC) (EVA) layer, a 275 µm polyethylene terephthalate (PET) layer and a 25 µm fluorinated polymer (FCC) layer with: a total thickness of 300 µm or more, but not more than 330 µm; a tensile strength of 375 N/cm or more in both the longitudinal and transverse directions (ASTM D-882); a low thermal shrinkage of 1 % or less at 150 °C for 30 minutes; a low water vapor permeability of 2,5 g/m²•d or less, and a high breakdown voltage of 18 kV or more and a partial discharge voltage of 1500 VDC or more (BG/T 123542.2-2009); to be used as a protective layer on the back of photovoltaic modules6.5%
• 3920.62.19.99 Other6.5%
• Of a thickness exceeding 0,35 mm
• 3920.62.90.10 Poly(ethylene terephthalate) film in rolls: with a thickness of 0,335 mm or more but not more than 0,365 mm, and coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm6.5%
• 3920.62.90.90 Other6.5%

3920.63 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of unsaturated polyesters, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.63.00.00 Of unsaturated polyesters6.5%

3920.69 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of polyesters n.e.c. in heading no. 3920, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.69.00.20 Film of poly(ethylene naphthalene-2,6-dicarboxylate)6.5%
• 3920.69.00.30 Mono- or multilayer, transverse oriented, shrink film: composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters; with a thickness of 20 μm or more but not more than 100 μm; with a length of 2 385 m or more but not more than 9 075 m; biodegradable and compostable (as determined by the method EN 13432)6.5%
• 3920.69.00.70 Mono- or multilayer, biaxially oriented film: composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters; with a thickness of 9 μm or more but not more than 120 μm; with a length of 1 395 m or more but not more than 21 560 m; biodegradable and compostable (as determined by the method EN 13432)6.5%
• 3920.69.00.90 Other6.5%

3920.71 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of regenerated cellulose; non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.71.00.00 Of regenerated cellulose6.5%

3920.73 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of cellulose acetate, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.73.10.00 Film in rolls or in strips, for cinematography or photography6.3%
• 3920.73.80.00 Other6.5%

3920.79 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of cellulose derivatives n.e.c. in heading no. 3920, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.79.10.00 Of vulcanised fibre5.7%
• 3920.79.90.00 Other6.5%

3920.91 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of poly(vinyl butyral), non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.91.00.10 For use in certain types of aircraft6.1%
• Other
• 3920.91.00.52 Poly(vinyl butyral) film: containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser; with a thickness of 0,73 mm or more but not more than 1,50 mm6.1%
• 3920.91.00.91 Poly(vinyl butyral) film having a graduated coloured band6.1%
• 3920.91.00.93 Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: a visible light transmission of 50 % or more; coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral); a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm6.1%
• Co-extruded trilayer poly(vinyl butyral) film
• 3920.91.00.95 Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser6.1%
• 3920.91.00.97 Other6.1%
• 3920.91.00.99 Other6.1%

3920.92 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of polyamides, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.92.00.00 Of polyamides6.5%

3920.93 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of amino-resins, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.93.00.00 Of amino-resins6.5%

3920.94 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of phenolic resins, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• 3920.94.00.00 Of phenolic resins6.5%

3920.99 Plastics; plates, sheets, film, foil and strip (not self-adhesive), of plastics n.e.c. in heading no. 3920, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

• Of condensation or rearrangement polymerisation products, whether or not chemically modified
• 3920.99.21.00 Polyimide foil and strip, uncoated, or coated or covered solely with plasticFree
• Other
• 3920.99.28.40 Polymer film containing the following monomers: poly (tetramethylene ether glycol); bis (4-isocyanotocyclohexyl) methane; 1,4-butanediol or 1,3-butanediol; with a thickness of 0,25 mm or more but not more than 5,0 mm; embossed with a regular pattern on one surface; and covered with a release sheet6.5%
• 3920.99.28.50 Thermoplastic polyurethane film (TPU) based on an aliphatic polycaprolactone (PCL), transparently backed on one side with a removable protective film (PET film), with a light transmission of more than 93% (according to DIN EN ISO 13468-1), with a thickness of 25μm or more but not more than 500μm6.5%
• 3920.99.28.65 Matt, thermoplastic polyurethane foil in rolls with: a width of 1640 mm (± 10 mm); a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457); a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287); a thickness of more than 365 µm but not more than 760 µm; a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)); an elongation to break of 470 % (as determined by the method: EN ISO 527)6.5%
• 3920.99.28.70 Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: microspheres with a coating of metal, whether or not alloyed with gold; an adhesive layer; with a protective layer of silicone or poly(ethylene terephthalate) on one side; with a protective layer of poly(ethylene terephthalate) on the other side, and with a width of 5 cm or more but not more than 100 cm; with a length of not more than 2 000 m6.5%
• 3920.99.28.90 Other6.5%
• Of addition polymerisation products
• 3920.99.52.00 Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97 % or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1 mmFree
• 3920.99.53.00 Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells—
• Other
• 3920.99.59.10 For use in certain types of aircraft6.5%
• Other
• 3920.99.59.25 Poly(1-chlorotrifluoroethylene) film6.5%
• 3920.99.59.65 Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 µm or more but not more than 90 µm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %6.5%
• 3920.99.59.90 Other6.5%
• 3920.99.90.00 Other6.5%