3921 Plastic plates, sheets, film, foil and strip n.e.c. in chapter 39

3921.11 Plastics; plates, sheets, film, foil and strip, of polymers of styrene, cellular

• 3921.11.00.10 Acrylonitrile butadiene styrene, for use in certain types of aircraft6.5%
• 3921.11.00.90 Other6.5%

3921.12 Plastics; plates, sheets, film, foil and strip, of polymers of vinyl chloride, cellular

• 3921.12.00.20 For use in certain types of aircraft6.5%
• 3921.12.00.90 Other6.5%

3921.13 Plastics; plates, sheets, film, foil and strip, of polyurethanes, cellular

• 3921.13.10.00 Flexible6.5%
• 3921.13.90.00 Other6.5%

3921.14 Plastics; plates, sheets, film, foil and strip, of regenerated cellulose, cellular

• 3921.14.00.20 Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm)6.5%
• 3921.14.00.80 Other6.5%

3921.19 Plastics; plates, sheets, film, foil and strip, of plastics n.e.c. in heading no. 3921, cellular

• 3921.19.00.10 For use in certain types of aircraft6.5%
• Other
• 3921.19.00.30 Blocks with cellular structure, containing by weight: polyamide-6 or poly(epoxy anhydride); 7 % or more but not more than 9 % of polytetrafluorethylene if present; 10 % or more but not more than 25 % of inorganic fillers6.5%
• 3921.19.00.50 Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with: a total thickness of more than 0,05 mm but not more than 0,20 mm; a water entry pressure between 5 and 200 kPa according to ISO 811, and an air permeability of 0,08 cm³/cm²/s or more according to ISO 5636-56.5%
• 3921.19.00.53 Sheets of closed-cell silicone foam with: a thickness of 2,0 mm or more but not more than 4,8 mm; a thermal insulation of more than 0,25 Km²/W but not more than 0,4 Km²/W (according to ASTM-C518); a dielectric strength of more than 3,0 Kv/mm but not more than 3,8 Kv/mm (according to ASTM- D149)6.5%
• 3921.19.00.55 Strip of microporous polytetrafluoroethylene on a support of a non-woven: wound on a roll on a core of 3 inches; with a width of 69.5mm, 40.8mm, 36.5mm, 20mm, 13.5mm or 10mm; for use in the manufacture of filters for kidney dialysis equipment and intravenous application6.5%
• 3921.19.00.65 Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, for the manufacture of alkaline battery separators with: a width of 98 mm or more but not more than 170 mm; a thickness of 15 μm or more but not more than 36 μm,6.5%
• 3921.19.00.75 Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: zero transversal production direction (TD) shrinkage; a total thickness of 8 μm or more, but not more than 40 μm; a width of 15 mm or more, but not more than 900 mm; a length of more than 200 m, but not more than 8 000 m; an average pore size between 0,02 μm and 0,1 μm; whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness; whether or not coated with surfactant; whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm; whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm6.5%
• 3921.19.00.95 Film of polyethersulfone, of a thickness of not more than 200 µm6.5%
• 3921.19.00.99 Other6.5%

3921.90 Plastics; plates, sheets, film, foil and strip, other than cellular

• Of condensation or rearrangement polymerisation products, whether or not chemically modified
• Of polyesters
• 3921.90.10.05 Corrugated sheet and plates6.5%
• 3921.90.10.10 Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres6.5%
• 3921.90.10.30 Multilayer film consisting of: a poly(ethylene terephthalate) film with a thickness of more than 100 µm but not more than 150 µm; a primer of phenolic material with a thickness of more than 8 µm but not more than 15 µm; an adhesive layer of a synthetic rubber with a thickness of more than 20 µm but not more than 30 µm; and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 µm but not more than 40 µm6.5%
• 3921.90.10.90 Other6.5%
• 3921.90.30.00 Of phenolic resins6.5%
• Of amino-resins
• Laminated
• 3921.90.41.00 High-pressure laminates with a decorative surface on one or both sides6.5%
• 3921.90.43.00 Other6.5%
• 3921.90.49.00 Other6.5%
• Other
• 3921.90.55.25 Prepreg sheets or rolls containing polyimide resin6.5%
• 3921.90.55.35 Glass fibre impregnated with epoxy resin for use in the manufacture of smart cards6.5%
• 3921.90.55.40 Three layered fabric sheet, in rolls: comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta; coated on both sides with polyamide; of a total thickness not more than 135 μm; of a total weight not more than 80 g/m²6.5%
• 3921.90.55.70 Membrane composed of a polyamide layer and a polysulfone layer on a polyethylene terephthalate support layer with: a total thickness of 0,25 mm or more but not more than 0,40 mm; a total weight of 109 g/m² or more but not more than 114 g/m²6.5%
• 3921.90.55.90 Other6.5%
• Of addition polymerisation products
• 3921.90.60.10 For use in certain types of aircraft6.5%
• 3921.90.60.90 Other6.5%
• 3921.90.90.00 Other6.5%