8482 Ball or roller bearings

8482.10 Ball bearings

• With greatest external diameter not exceeding 30 mm
• 8482.10.10.15 Ball bearings with: an internal diameter of 4 mm or more but not more than 9 mm; an external diameter of not more than 26 mm; a width of not more than 8 mm; for use in the manufacture of electromotors with a range of 40 000 rpm or more but not more than 80 000 rpm8%
• 8482.10.10.90 Other8%
• 8482.10.90.00 Other8%

8482.20 Bearings; tapered roller bearings, including cone and tapered roller assemblies

• 8482.20.00.00 Tapered roller bearings, including cone and tapered roller assemblies8%

8482.30 Bearings; spherical roller bearings

• 8482.30.00.00 Spherical roller bearings8%

8482.40 Bearings; needle roller bearings, including cage and needle roller assemblies

• 8482.40.00.00 Needle roller bearings, including cage and needle roller assemblies8%

8482.50 Bearings; cylindrical roller bearings, including cage and roller assemblies n.e.c. in heading no. 8482

• 8482.50.00.20 Axial roller bearing made of steel: the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98; the rollers are made of anti-friction steel according to ASTM 295-94; with an external diameter of 63 mm or more but not more than 66 mm; with an internal diameter of 44 mm or more but not more than 46 mm; with a weight of 23 g or more but not more than 27 g; with 36 rollers or more but not more than 38 rollers8%
• 8482.50.00.90 Other8%

8482.80 Bearings; n.e.c. in heading no. 8482, including combined ball/roller

• 8482.80.00.10 Connecting components for use in the production of helicopter tail rotor shafts8%
• 8482.80.00.90 Other8%

8482.91 Bearings; parts, balls, needles and rollers

• 8482.91.10.00 Tapered rollers8%
• Other
• 8482.91.90.10 Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm: made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290); with a deviation of 0,5 mm or less as determined with the FBHmethod; for use in wind turbine industry7.7%
• 8482.91.90.90 Other7.7%

8482.99 Bearings; parts, (other than balls, needles and rollers)

• 8482.99.00.30 Brass cages with the following characteristics: continuously or centrifugally cast; turned; containing by weight 35 % or more, but not more than 38 % of zinc; containing by weight 0,75 % or more, but not more than 1,25 % of lead; containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and with a tensile strength of 415 Pa or more; of a kind used for the manufacture of ball bearings8%
• 8482.99.00.60 Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of: ­ 14 mm or more but not more than 77 mm for the inner ring; ­ 26 mm or more but not more than 101 mm for the outer ring for use in the manufacture of bearings8%
• 8482.99.00.70 Male and female parts of cages: made of flat-rolled steel; with a diameter of 14,5 mm or more but not more than 420 mm; the male part including rivets; the female part including holes; used for manufacturing of deep grove ball bearings8%
• 8482.99.00.80 Punched cages of various diameters: made of flat rolled steel; with tensile strength of 270 MPa or more; for the production of tapered roller bearings8%
• 8482.99.00.90 Other8%